Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Length [mm]: 267
- Width [mm]: 174
- Height [mm]: 18
-
Transmission Type: 7-
Speed Automatic Transmission - Filter type: Filter Insert
-
Lisainfo: Hydraulic Filter,
automatic transmission -
Additional information: Hydraulic Filter,
automatic transmission
-
Transmission Type: 5-
Speed Automatic Transmission - Filter type: Filter Insert
- Supplementary Article/Supplementary Info: with seal
- Width [mm]: 112
- Height [mm]: 46
- Transmission Code: 5G TRONIC
- Manufacturer: KAMOKA FILTRY
- Transmission ID: 722.646
-
Transmission Type: 5-
Speed Automatic Transmission - Length [mm]: 200
- Width [mm]: 120
- Height [mm]: 45
-
Transmission Code: 722,
6 - See accessories list for additionally required parts:
- Weight [kg]: 0.263
- Filter type: Filter Insert
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 4
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 5-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
-
Manufacturer Restriction: MERCEDES-
BENZ - Quantity Unit: Set
-
Transmission Code: W5A 900,
W5A 580, W5A 380, W5A 330, 722.6 -
Name: Hdraulikafilter,
automaatkigukast - Manufacturer: MAX
- Block Separation:
-
Transmission Type: 7-
Speed Automatic Transmission - Filter type: Filter Insert
- Supplementary Article/Supplementary Info: with seal
- Width [mm]: 173
- Height [mm]: 55
- Transmission Code: 7G TRONIC
- Manufacturer: KAMOKA
Transmission ID: 722.901-909, 722.930,931, 722.950, 722.951, 722.960-967, 722.980,982, 722.996-999
- Filter type: Filter Insert
- Length [mm]: 186.9
- Width [mm]: 112
- Height [mm]: 50.4
- Inner Diameter 2 [mm]: 29
-
Transmission Code: 722.6,
W5A 330, W5A 380, W5A 580, W5A 900 - Supplementary Article/Supplementary Info: with seal
- Gasket Design: Fibre Composite
-
Recommended change interval [km]: 50,
000 - Packaging length [cm]: 17.9
- Net Weight [g]: 230
- Packaging height [cm]: 30.35
- Packaging width [cm]: 5.75
- Name: KN HX81D
- Manufacturer: KNECHT
Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission
-
Transmission Code: 722.618,
646, 695, 6 - Filter type: Suction Filter
- Height [mm]: 18
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: DENCKERMANN FILTRY
- Filter type: Suction Filter
- Weight [kg]: 0.34
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 96SKV064
- Transmission Code: 722~
- Filter type: Screen Filter
- Manufacturer: JAPKO
-
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
- See accessories list for additionally required parts:
-
Fabrication Number: FSF-
ME- 003 - Manufacturer: NTY
-
Name: NTY FSF-
ME- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Filter type: Filter Insert
-
Transmission Code: 722.600-
699 -
Transmission Type: 5-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Transmission Code: 722.646
- Manufacturer: HENGST FILTER
Transmission Type: Automatic Transmission, Manual-/optional automatic transmission
-
Transmission Type: 5-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
-
Manufacturer Restriction: MERCEDES-
BENZ - Quantity Unit: Set
-
Transmission Code: 722.6,
W5A 330, W5A 380, W5A 580, W5A 900 -
Name: HDRAULIKAFILTRIKOMPLEKT,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Transmission number to: 2834526
- Transmission ID: 722.9
- Filter type: Screen Filter
- Length [mm]: 267
- Width [mm]: 174
- Height [mm]: 52
- Weight [kg]: 0.361
- Manufacturer: SWAG
- Name: SW 10 92 4538
Transmission Type: 7-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission number to: 2834526
- Transmission ID: 722.9
- Filter type: Screen Filter
- Length [mm]: 267
- Width [mm]: 174
- Height [mm]: 52
- Weight [kg]: 0.361
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: FEB
Transmission Type: 7-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Weight [kg]: 0.438
- Manufacturer: METALCAUCHO
-
Transmission Code: 722.618,
646, 695, 6 - Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Supplementary Article/Info 2: with oil sump gasket
- Height [mm]: 18
- SVHC: No SVHC present!
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: MAN
- Lisainfo: H 182 KIT MAN
- Additional information: H 182 KIT MAN
-
Transmission Type: 7-
Speed Automatic Transmission - Filter type: Screen Filter
- Supplementary Article/Info 2: with filter
- Supplementary Article/Supplementary Info: with seal
- for components see parts list:
- Observe system fill quantity:
-
Name: HDRAULIKAFILTRIKOMPLEKT,
AUTOMAATKIGUKAST - Manufacturer: HAN
Transmission ID: 722.901 - 722.967, 722.980, 722.982, 722.995, 722.996, 722.997, 722.998, 722.999 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Filter type: Filter Insert
- Width [mm]: 112
- Height [mm]: 50
- Height 1 [mm]: 18
- Inner Diameter [mm]: 29
- Transmission Type: Automatic Transmission
- Gasket Design: Soft Material Gasket
- Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: with seal ring
- Quality class: PJ
- Name: Automatic transmission filter
- Filter type: Suction Filter
-
Transmission Type: 7-
Speed Automatic Transmission -
Transmission Code: 722.9..,
W7B/ C/ N/ X, K7C - Manufacturer: ELRING
-
Transmission Type: 7-
Speed Automatic Transmission - Filter type: Filter Insert
- See accessories list for additionally required parts:
-
Fabrication Number: FSF-
ME- 004 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Transmission number from: 2834527
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Block Separation:
- for SA code: A89
- Height [mm]: 56
- Supplementary Article/Supplementary Info: with seal
- Width [mm]: 174
-
Name: Hdraulikafiltrikomplekt,
automaatkigukast - Manufacturer: MAX
- Transmission Number: 722.9...
- Construction Year to: 06.2010
- not for PR number: A89
-
not for transmission code: 7-
G Tronic Plus -
Transmission Type: 7-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: without gasket/
seal - Quantity Unit: Piece
- Transmission Code: 722.9
- Filter type: Filter Insert
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Filter type: Screen Filter
- Manufacturer: JAPKO
- Transmission Number: 722.9...
- Construction Year to: 06.2010
- not for PR number: A89
-
not for transmission code: 7-
GTronicPlus -
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
-
Manufacturer Restriction: MERCEDES-
BENZ - Quantity Unit: Set
-
Name: Hdraulikafilter,
automaatkigukast - Manufacturer: MAX
Transmission Code: W7X 700, W7N 700, W7B 700, K7C 1000, W7C 700, W7C 1000, 722.9
-
Transmission Type: 7-
Speed Automatic Transmission -
Transmission Code: 722.9..,
W7B/ C/ N/ X, K7C - Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: ELRING
- Additional information: 097.550 ELRING
- Lisainfo: 097.550 ELRING
-
Transmission Code: 722.901-
722.999, 7G- Tronic - Filter type: Suction Filter
- Length [mm]: 267
- Inner Diameter [mm]: 21
- Width [mm]: 174
- Height [mm]: 18
- Manufacturer: DENCKERMANN FILTRY
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.961
- Length [mm]: 268
- Width [mm]: 175
- Height [mm]: 58
- Weight [kg]: 0.495
- Supplementary Article/Info 2: with oil sump gasket
-
Name: OSADE KOMPLEKT,
OLIVAHETUS- AUTOMAATKIGUKAST - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission number from: 722.900
- Transmission number to: 722.999
- Filter type: Filter Insert
- Width [mm]: 174
- Height [mm]: 54
- Inner Diameter [mm]: 24
-
Transmission Type: 7-
Speed Automatic Transmission - Gasket Design: Soft Material Gasket
- Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: with seal ring
- Quality class: PJ
- Name: Automatic transmission filter
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.961
- Length [mm]: 268
- Width [mm]: 175
- Height [mm]: 58
- Weight [kg]: 0.495
- Supplementary Article/Info 2: with oil sump gasket
- Name: SW 10 93 0157
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
- Supplementary Article/Info 2: with oil sump gasket
- Width 1 [mm]: 267
- Width 2 [mm]: 174
- Height [mm]: 58
-
Transmission Code: 722,
9 -
Name: Hdraulikafilter,
automaatkigukast - Manufacturer: ALC
- Filter type: Screen Filter
-
Seal Material: ACM
(Polyacrylate) - Weight [kg]: 0.438
- Supplementary Article/Info 2: with oil sump gasket
-
Name: OSADE KOMPLEKT,
OLIVAHETUS- AUTOMAATKIGUKAST - Manufacturer: FEB
- Lisainfo: 44530 FEBI
- Additional information: 44530 FEBI
Transmission Type: 7-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission number to: 2834526
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Length [mm]: 267
- Weight [kg]: 0.4
- Filter type: Screen Filter
- Manufacturer: DRIVE
- Transmission Number: 722.9...
- Construction Year to: 06.2010
- not for PR number: A89
-
not for transmission code: 7-
G Tronic Plus -
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
-
Manufacturer Restriction: MERCEDES-
BENZ - Quantity Unit: Set
-
Name: HDRAULIKAFILTRIKOMPLEKT,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Lisainfo: 0140370000
- Additional information: 0140370000
Transmission Code: 722.9, W7C 1000, W7C 700, K7C 1000, W7B 700, W7N 700, W7X 700
- Parameter: DP1110.14.0008
- Weight [kg]: 0.5
- Filter type: Screen Filter
- Manufacturer: DRIVE
- Filter type: Screen Filter
-
Seal Material: ACM
(Polyacrylate) - Supplementary Article/Info 2: with oil sump gasket
- Name: SW 10 94 4530
- Manufacturer: SWAG
Transmission Type: 7-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: for 7-
speed automatic transmission - Supplementary Article/Supplementary Info: with seal
- Material: Rubber
-
Transmission Code: 722.900-
999 - for OE number: A 221 277 02 00
- Article number of recommended accessories: 8029033
- Manufacturer: METZGER
- Transmission Code: 722~
- Filter type: Screen Filter
- Manufacturer: JAPKO
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.961
- Length [mm]: 268
- Width [mm]: 175
- Height [mm]: 58
- Weight [kg]: 0.495
- Supplementary Article/Info 2: with oil sump gasket
-
Name: Hdraulikafiltrikomplekt,
automaatkigukast - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
-
Transmission Code: 722,
9, 7G- Tronic -
Transmission Type: 7-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with accessories,
with seal, with guide bolts - Supplementary Article/Info 2: with bolts
- Quality class: PJ
- Name: Automatic transmission filter
Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999
- Vehicle Equipment: for vehicles with automatic transmission
-
Transmission Code: 7G-
Tronic -
Transmission Type: Manual-
/ optional automatic transmission - Manufacturer: HENGST FILTER
- Lisainfo: EG841H D449
- Additional information: EG841H D449
- Transmission ID: 722.961
- Production date from: 21.06.2010
- Specification: MB236.15
- Filter type: Filter Insert
-
Transmission Code: 722,
9, 7G- Tronic Plus -
Transmission Type: 7-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with accessories,
with seal, without guide bolts - Supplementary Article/Info 2: without nut
- Quality class: PJ
- Name: Automatic transmission filter
-
Transmission Code: 7G-
Tronic, 722, 9 - See accessories list for additionally required parts:
- Supplementary Article/Supplementary Info: with seal
- Weight [kg]: 0.809
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
- Quality class: PJ
- Name: Automatic transmission filter
Transmission Type: for 7-speed automatic transmission, 7-Speed Automatic Transmission Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission number from: 2834527
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Length [mm]: 267
- Width [mm]: 174
- Height [mm]: 56
- Weight [kg]: 0.356
- Supplementary Article/Info 2: with oil sump gasket
-
Name: Hdraulikafiltrikomplekt,
automaatkigukast - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Code: 722.901-
722.999, 7G- Tronic - Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 267
- Width [mm]: 174
- Height [mm]: 18
- Inner Diameter [mm]: 21
- SVHC: No SVHC present!
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: MAN
- Filter type: Screen Filter
-
Seal Material: ACM
(Polyacrylate) -
Supplementary Article/Info 2: with bolts/
screws, with oil sump gasket - Weight [kg]: 0.474
- Transmission Type: for automatic transmission
-
Name: Hdraulikafiltrikomplekt,
automaatkigukast - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 5-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
-
Manufacturer Restriction: MERCEDES-
BENZ - Quantity Unit: Set
- Transmission Code: W5A 900
-
Name: HDRAULIKAFILTRIKOMPLEKT,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Filter type: Filter Insert
- Transmission Code: 722.9 ECO
-
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Transmission ID: 722.961
- Production date from: 21.06.2010
- for PR number: A89
-
Transmission Code: 722,
9, 7G- Tronic Plus -
Transmission Type: 7-
Speed Automatic Transmission - See accessories list for additionally required parts:
- Weight [kg]: 0.556
- Filter type: Filter Insert
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Code: 722,
9, 7G- Tronic -
Supplementary Article/Supplementary Info: with seal,
with accessories -
Supplementary Article/Info 2: with bolts/
screws - See accessories list for additionally required parts:
- Weight [kg]: 0.731
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: for 7-speed automatic transmission, 7-Speed Automatic Transmission Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity Unit: Set
-
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with accessories
- Transmission Code: 722.9 ECO
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Transmission Number: 722.961
- Production date from: 21.06.2010
- Specification: MB236.15
- for PR number: A89
-
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
-
Manufacturer Restriction: MERCEDES-
BENZ - Quantity Unit: Set
-
Supplementary Article/Info 2: with bolts/
screws -
Quality: OE-
SPECIFICATION - Additive Version: Reduced Friction
-
Name: Hdraulikafiltrikomplekt,
automaatkigukast - Manufacturer: MEY
Transmission Code: W7X 700, W7C 1000, 722.9, 7G-TRONIC +, K7C 1000, K7X 1000, W7B 700, W7C 700, W7N 700 General Information: MEYLE Hydraulic filter complies with the OEM specification Smart-Media™-Triple.
- Transmission ID: 722.961
- Production date from: 21.06.2010
-
Transmission Type: 7-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with seal,
with accessories - for PR number: A89
-
Transmission Code: 722,
9, 7G- Tronic Plus -
Supplementary Article/Info 2: with bolts/
screws - See accessories list for additionally required parts:
- Weight [kg]: 0.731
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.