• for OE number: 005 153 50 28, 2E0 906 051 A
• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Fabrication Number: ECM-ME-000
• Manufacturer: NTY

• Engine Code: M 273.970
• for article number: 1.880.776, 1.880.875
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-ME-000
• Manufacturer: NTY

• Construction Year to: 08.2011
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 3
• Colour: black
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fabrication Number: ECP-ME-006
• Number of pins: 3

• Fabrication Number: ECP-ME-003
• Manufacturer: NTY

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Construction Year to: 08.2011
• Number of pins: 3
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550777
• Manufacturer: ERA

• Construction Year to: 08.2011
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

Manufacturer: MAGNETI MARELLI

• Required quantity: 4
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10171

• Number of pins: 3
• Pressure from [kPA]: 10
• Manufacturer: DELPHI

• Engine Code: M 273.970
• Required quantity: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• for OE number: 005 153 50 28, 2E0 906 051 A
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: M 273.970
• Required quantity: 4
• Length [mm]: 24
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Transmission Type: Manual Transmission
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550328
• Manufacturer: ERA

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603

Manufacturer: FAST

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114361
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Quantity: 1
• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 120
• Measuring Range from [V]: 0.5
• Measuring Range to [V]: 4.5
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year to: 08.2011
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Length [mm]: 202
• Number of connectors: 2
• Weight [kg]: 0.019
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 273.970
• Required quantity: 4
• Name: EP 1.953.387
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• for OE number: 004 153 3028
• Manufacturer: TRUCKTEC

• Quantity: 4
• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Quantity: 4
• Alternatively:
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11033

• Transmission Type: Manual Transmission
• Length [mm]: 24
• Number of connectors: 3
• Weight [kg]: 0.029
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 35
• Width [mm]: 48.5
• Thickness [mm]: 43
• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 005 153 50 28
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 273.970
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Output Voltage, from [V]: 0.503
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.106
• Manufacturer: EPS

• Construction Year to: 08.2011
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Required quantity: 4
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.2
• Supplementary Article/Info 2: with seal ring, without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA
• Name: HE 6PU009168001

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 08.2011
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Quantity: 4
• Number of pins: 3
• Fitting Depth [mm]: 24.1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Fuel Type: Petrol
• Used part return not required:
• Fabrication Number: EPP-ME-013
• Manufacturer: NTY

• for OE number: 273 094 05 48
• Manufacturer: KAMOKA

• Engine Code: M 273.970
• Lambda Sensor: Diagnostic Probe
• Required quantity: 2
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Construction Year to: 08.2011
• Lambda Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Name: SW 10 93 8292
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 08.2011
• Weight [kg]: 0.31
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV160

• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Conductor Number: 4
• Resistor [Ohm]: 9
• Number of circuits: 4
• Length [mm]: 500
• Cable Length [mm]: 500
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Resistor [Ohm]: 9
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 320
• Cable Length [mm]: 320
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 273.970
• Voltage [V]: 12
• Name: Ohumassimootja
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 490
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV700

• Fabrication Number: ESL-CH-032
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Required quantity: 4
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Connector Shape: angled
• Fitting Position: in fuel tank
• Fuel Type: Petrol
• Version: AM
• Manufacturer: METZGER

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.2011
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV402
• Manufacturer: ESEN SKV

• Weight [kg]: 0.02
• for OE number: A 004 153 32 28
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Planar probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 500
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: after catalytic converter, left cylinder row, right cylinder row

• Weight [kg]: 0.02
• for OE number: A 006 153 98 28
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.2011
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 490
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• for OE number: 003 542 7018
• Cable Length [mm]: 550
• Number of pins: 5
• Lambda Sensor: Regulating Probe, Heated
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Lambda Sensor: Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for article number: 81577E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 625
• Number of pins: 6
• Manufacturer: ERA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Construction Year from: 09.2009
• Construction Year to: 09.2011
• Engine Code: 273.970
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 500
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.137
• Manufacturer: VALEO

• Engine Code: M 273.970
• Fitting Position: Left, Right, Front, before catalytic converter
• Required quantity: 2
• Colour: black
• Length [mm]: 560
• Cable Length [mm]: 570
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.472
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Engine Code: M 273.970
• Number of circuits: 5
• Length [mm]: 600
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10360-12B1

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Required quantity: 2
• Cable Length [mm]: 600
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 08.2011
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, Left, Right
• Block Separation:
• Number of circuits: 5
• Overall Length [mm]: 560
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter
• Lambda Sensor: Broadband lambda sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 570
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

• Construction Year to: 08.2011
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 540
• Number of circuits: 5
• Manufacturer: ERA

• Lambda Sensor: Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for article number: 81577
• for OE number: 13627791592
• Manufacturer: MEAT&DORIA