Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 2
- for OE number: 210 325 0284
- Fitting Position: Rear Axle
- Thickness [mm]: 9
- Manufacturer: TRUCKTEC
- Thickness [mm]: 13
- Inner Diameter [mm]: 63
- Outer Diameter [mm]: 105
- Material: Rubber
- Number of Knobs: 3
- Fitting Position: Rear Axle
- Weight [kg]: 0.149
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 10
- Number of Knobs: 1
- Fitting Position: Rear Axle
- Thickness [mm]: 5
- Weight [kg]: 0.092
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 9
- Inner Diameter [mm]: 63
- Outer Diameter [mm]: 105
- Material: Rubber
- Number of Knobs: 2
- Fitting Position: Rear Axle
- Weight [kg]: 0.121
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- not for trim level: Sport
- Length [mm]: 300
- Outer Diameter [mm]: 60
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.074
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 9
- Inner Diameter [mm]: 63
- Outer Diameter [mm]: 105
- Material: Rubber
- Number of Knobs: 2
- Fitting Position: Rear Axle
- Weight [kg]: 0.121
- Name: SW 10 56 0022
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 5
- Height [mm]: 9
- Fitting Position: Rear Axle
- Weight [kg]: 0.133
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 10
- Number of Knobs: 3
- Fitting Position: Rear Axle
- Thickness [mm]: 13
- Weight [kg]: 0.149
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Trim Level: Avantgarde
- Length [mm]: 78
- Width [mm]: 60.5
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.069
-
Name: Puhver,
vedrustus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 116
- Weight [kg]: 0.123
- Packaging length [cm]: 11.5
- Packaging width [cm]: 3.1
- Packaging height [cm]: 3.1
- Manufacturer: FEBEST
- Thickness [mm]: 17
- Inner Diameter [mm]: 63
- Outer Diameter [mm]: 105
- Material: Rubber
- Number of Knobs: 4
- Fitting Position: Rear Axle
- Weight [kg]: 0.149
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 17
- Inner Diameter [mm]: 63
- Outer Diameter [mm]: 105
- Material: Rubber
- Number of Knobs: 4
- Fitting Position: Rear Axle
- Weight [kg]: 0.149
- Manufacturer: SWAG
- Name: SW 10 56 0024
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Braking/Drive Dynamics: for vehicles without Airmatic DC
- Thickness [mm]: 224
- Inner Diameter [mm]: 68
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 88
- Weight [kg]: 0.09
- Manufacturer: FEB
- Additional information: FE40088
- Lisainfo: FE40088
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid DB P. CLA/CLS/C W204/A W176/B W246 LE/PR
- Fitting Position: Front Axle
- Height [mm]: 224
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Kaitsemts/
kaitsekumm, amort - Manufacturer: MEY
- Fitting Position: Front Axle both sides
- Control/Trailing Arm Type: for control arm
- Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
- Fitting Position: Front Axle
- Manufacturer: ASHIKA
Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles without sports suspension, for vehicles without increased ground clearance
- Fitting Position: Front Axle
- Manufacturer: JAPKO
Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles without sports suspension, for vehicles without increased ground clearance
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles without sports suspension, for vehicles without increased ground clearance
- for OE number: A2123210306
- Fitting Position: Front Axle
- Weight [g]: 179
- Component Number: 2
- Name: IM 50749
- Manufacturer: ORIGINAL IMPERIUM
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Diameter [mm]: 102
- Height [mm]: 35
- Weight [kg]: 0.149
- Number of Knobs: 4
- Thickness [mm]: 17
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles without sports suspension, for vehicles without increased ground clearance Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package
- Weight [kg]: 0.252
- Packaging length [cm]: 13.6
- Packaging width [cm]: 3.1
- Packaging height [cm]: 3.1
- Manufacturer: FEBEST
- Length [mm]: 136
-
External Thread Size: M14 x 1,
5 - Bolt Head-/Nut Design: Male Torx
- Control/Trailing Arm Type: Control Arm
- Screw length below head [mm]: 120
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.235
-
Name: MONTAA?IKOMPLEKT,
ROOLISSTEEM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 2
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles without sports suspension, for vehicles without increased ground clearance Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks