• Filter type: In-Line Filter
• Height [mm]: 118
• Outer Diameter [mm]: 87
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: without filter heating, In-Line Filter
• Manufacturer Restriction: MANN+HUMMEL
• Height [mm]: 100
• Outer Diameter [mm]: 87
• Outlet Ø [mm]: 8
• Inlet Ø [mm]: 10
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Axle Code: 741.412
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Brake System: Bosch
• Height [mm]: 63
• Width [mm]: 137
• Thickness [mm]: 19
• Wear Warning Contact: incl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• not for axle code: 741.412
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Brake System: Bosch
• Height [mm]: 79
• Width [mm]: 165
• Thickness [mm]: 20.8
• Wear Warning Contact: prepared for wear indicator
• Lisainfo: Brake pad set, rear, 20.8 mm
• Additional information: Brake pad set, rear, 20.8 mm

• Fitting Position: Front Axle
• Brake System: Brembo
• Height [mm]: 73.5
• Width [mm]: 169
• Thickness [mm]: 20.7
• Wear Warning Contact: prepared for wear indicator
• Lisainfo: Brake pad set, front, 20.7 mm
• Additional information: Brake pad set, front, 20.7 mm

• Filter type: Filter Insert
• Height [mm]: 119
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 86
• Quality class: PJ
• Name: Fuel filter

• Manufacturer Restriction: MANN+HUMMEL
• Outer Diameter 1 [mm]: 86
• Outer Diameter 2 [mm]: 91
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 10
• Height [mm]: 117
• Filter type: In-Line Filter
• Manufacturer: DENCKERMANN FILTRY

• Engine Code: OM 651.956, OM 651.957
• Filter type: In-Line Filter
• Height [mm]: 125
• Outer Diameter [mm]: 92
• Weight [kg]: 0.34
• Supplementary Article/Info 2: with seal ring
• Name: Ktusefilter
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 642 092 0201
• Filter type: In-Line Filter
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Manufacturer Restriction: MANN+HUMMEL
• Height [mm]: 125
• Outer Diameter [mm]: 86
• Packing Type: Box
• Filter type: In-Line Filter, without water separator
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 10
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 14.6
• Name: CH CFF100567
• Manufacturer: CHAMPION

• Trim Level: Without Fil. Heating
• Manufacturer Restriction: MANN+HUMMEL
• Filter type: Filter Insert
• Diameter 1 [mm]: 92
• Diameter 2 [mm]: 8
• Diameter 3 [mm]: 10
• Height [mm]: 125
• Name: CL DN2705
• Manufacturer: CLEAN FILTERS

• Manufacturer Restriction: Mahle
• Outer Diameter [mm]: 87
• Height [mm]: 118
• Manufacturer: DENCKERMANN FILTRY

Filter type: In-Line Filter, with connection for water sensor, without filter heating

• Manufacturer Restriction: MANN+HUMMEL
• Filter type: without filter heating, In-Line Filter
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 100
• Outer Diameter [mm]: 87
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Filter type: In-Line Filter
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Height [mm]: 100
• Outer Diameter [mm]: 87
• Manufacturer: FAST

• Filter type: Filter Insert
• Outer Diameter [mm]: 93
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Height [mm]: 117
• Manufacturer: MEAT&DORIA

• Manufacturer Restriction: MANN+HUMMEL
• Filter type: without filter heating, Filter Insert
• Parameter: DP1110.13.0088
• Height [mm]: 125
• Fuel Type: Diesel
• Outer Diameter [mm]: 92
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Manufacturer: DRIVE

• Manufacturer Restriction: Mahle
• Filter type: without filter heating, In-Line Filter
• Parameter: DP1110.13.0203
• Height [mm]: 118
• Outer Diameter [mm]: 87
• Manufacturer: DRIVE

• Engine Code: OM 651.956, OM 651.957
• Filter type: In-Line Filter
• Height [mm]: 125
• Outer Diameter [mm]: 92
• Weight [kg]: 0.34
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Trim Level: Without Fil. Heating
• Manufacturer Restriction: Mahle System
• Filter type: Filter Insert
• Diameter 1 [mm]: 91.5
• Diameter 2 [mm]: 8
• Diameter 3 [mm]: 10
• Height [mm]: 135
• Name: CL DN2709
• Manufacturer: CLEAN FILTERS

• Manufacturer Restriction: MANN+HUMMEL
• Filter type: without filter heating
• Height [mm]: 124
• Outer Diameter [mm]: 91
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Fitting Position: Rear Axle
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Bosch
• Width [mm]: 136
• Height [mm]: 63
• Thickness [mm]: 19
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 102
• Manufacturer: KAMOKA

• Filter type: with water sensor, In-Line Filter
• Manufacturer Restriction: Mahle
• Diameter [mm]: 92
• Material: Plastic
• Height [mm]: 135
• Manufacturer: DELPHI
• Name: DE HDF653

• Manufacturer Restriction: MANN+HUMMEL
• Filter type: without filter heating, In-Line Filter
• Height [mm]: 125
• Outer Diameter [mm]: 91
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 10
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Engine Code: OM 651.956, OM 651.957
• Height [mm]: 135
• Outer Diameter [mm]: 91.5
• Number of connectors: 3
• Pipe Ø [mm]: 10, 8
• Weight [kg]: 0.36
• Manufacturer: FEBI BILSTEIN

Filter type: In-Line Filter, without filter heating, with water separator General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 137
• Height [mm]: 63
• Thickness [mm]: 19
• Number of wear indicators [per axle]: 2
• Brake System: Bosch
• Article number of recommended accessories: 20-0125
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

Braking System: for vehicles with full brake discs on the rear axle Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Filter type: with water sensor, In-Line Filter
• Manufacturer Restriction: Mann
• Diameter [mm]: 92
• Material: Plastic
• Height [mm]: 125
• Manufacturer: DELPHI
• Name: DE HDF617

• Supplementary Article/Supplementary Info: with holder
• for OE number: 6512003900
• Fabrication Number: EZC-ME-023
• Manufacturer: NTY
• Name: NTY EZC-ME-023

• Fitting Position: Rear Axle
• Width [mm]: 25
• Brake System: ATE
• Inner brake drum diameter [mm]: 180
• Weight [kg]: 1.1
• Manufacturer: TOMEX BRAKES

• Construction Year from: 05.2011
• Fitting Position: Rear Axle
• Axle Code: 741.412
• Brake System: BOSCH
• Warning Contact Length [mm]: 95
• Number of wear indicators [per axle]: 2
• Height [mm]: 63
• Width [mm]: 136.8
• Thickness [mm]: 20.2
• Manufacturer: LPR

• Supplementary Article/Supplementary Info: with holder
• for OE number: 6512006000
• Fabrication Number: EZC-ME-022
• Manufacturer: NTY
• Name: NTY EZC-ME-022

• Fitting Position: Rear Axle
• Width 1 [mm]: 136.8
• Height 1 [mm]: 63
• Thickness 1 [mm]: 19
• Brake System: BOSCH
• Warning Contact Length [mm]: 95
• Manufacturer Restriction: BOSCH
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.54
• Number of wear indicators [per axle]: 2
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Diameter [mm]: 92
• Material: Metal
• Height [mm]: 125
• Name: KšTUSEFILTER
• Manufacturer: MEY

Filter type: without filter heating, In-Line Filter, without connection for water sensor

• Brake Disc Type: internally vented
• Article number of recommended accessories: 98036500
• Fitting Position: Rear Axle
• Width [mm]: 165
• Height [mm]: 79
• Thickness [mm]: 20.6
• Wear Warning Contact: prepared for wear indicator
• Brake System: Bosch
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: BOSCH
• Length [mm]: 165
• Thickness [mm]: 20.5
• Wear Warning Contact: prepared for wear indicator
• Height [mm]: 78.1
• Manufacturer: AUTO-GH

• Engine Code: OM 651.957, OM 651.955
• Diameter [mm]: 86.5
• Outer Diameter 1 [mm]: 92
• Inner Diameter 2 [mm]: 10
• Outer Diameter 2 [mm]: 8
• Height [mm]: 125
• Name: KšTUSEFILTER
• Manufacturer: BOS

Filter type: without water separator, without filter heating, In-Line Filter

• Manufacturer Restriction: MANN+HUMMEL
• Height [mm]: 135
• Weight [kg]: 0.414
• Thread Size: M5x0.8
• Height 1 [mm]: 116
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 87
• Packing Type: Box
• Filter type: In-Line Filter
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Thread Size 1: M5x0.8
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 15
• Name: CH CFF100720
• Manufacturer: CHAMPION

• Fitting Position: Front Axle
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Width [mm]: 168
• Height [mm]: 74
• Thickness [mm]: 20
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Filter type: without filter heating, Filter Insert
• Height [mm]: 125
• Outer Diameter [mm]: 86.5
• Outer Diameter 1 [mm]: 92
• Outlet Ø [mm]: 8
• Inlet Ø [mm]: 10
• Manufacturer: SOFIMA

• Fitting Position: Rear Axle
• Wear Warning Contact: prepared for wear indicator
• Brake System: Bosch
• Width [mm]: 165
• Height [mm]: 78
• Thickness [mm]: 20
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Width [mm]: 42
• Manufacturer: FAST

• Construction Year from: 05.2011
• Fitting Position: Rear Axle
• Axle Code: 741.412
• Height [mm]: 63
• Warning Contact Length [mm]: 95
• Thickness [mm]: 20.2
• Number of wear indicators [per axle]: 2
• Width [mm]: 136.8
• Brake System: BOSCH
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Width [mm]: 164.8
• Height [mm]: 78.2
• Thickness [mm]: 20.5
• Brake System: Bosch
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Length [mm]: 165
• Width [mm]: 78.1
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 20.5
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.589
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 05.2011
• Fitting Position: Rear Axle
• Axle Code: 741414/741416/741420
• Height [mm]: 78.1
• Brake System: BOSCH
• Thickness [mm]: 20.5
• Width [mm]: 165
• Manufacturer: LPR

• Filter type: In-Line Filter
• Outer Diameter [mm]: 91
• Height [mm]: 100
• Manufacturer: HENGST FILTER

• Construction Year to: 12.2014
• Engine Number to: 32662278
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Height [mm]: 73.5
• Thickness [mm]: 20.8
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Width [mm]: 169
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Construction Year from: 08.2013
• Construction Year to: 03.2018
• Fitting Position: Rear Axle
• Brake System: BOSCH
• Width [mm]: 137
• Height [mm]: 63.1
• Thickness [mm]: 19.8
• WVA Number: 29190
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1
• Manufacturer: VALEO
• Name: VA 301728

• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Thickness [mm]: 19.8
• Width [mm]: 136.9
• Height [mm]: 63.1
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: BOSCH
• Warning Contact Length [mm]: 95
• Supplementary Article/Info 2: with brake caliper screws
• Weight [kg]: 1.7
• Manufacturer: TOMEX BRAKES

• Construction Year from: 05.2011
• Fitting Position: Front Axle
• Height [mm]: 73.5
• Brake System: BREMBO
• Width [mm]: 169.1
• Thickness [mm]: 20.8
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Axle Code: 741.412
• Brake Disc Type: solid
• Width [mm]: 137
• Height [mm]: 63
• Thickness [mm]: 19
• Number of wear indicators [per axle]: 2
• Brake System: Bosch
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Filter type: In-Line Filter
• Fuel Type: Diesel
• Height [mm]: 100
• Outer Diameter [mm]: 90
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• for OE number: 6510900852
• Manufacturer: KAMOKA

• Manufacturer Restriction: MANN+HUMMEL
• Filter type: without filter heating, In-Line Filter
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 100
• Outer Diameter [mm]: 87
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Filter type: without water sensor, Filter Insert
• Outer Diameter [mm]: 86
• Inner Diameter [mm]: 8
• Height [mm]: 119
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
SPRINTER 3,5 PLATFOR
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
SPRINTER 3,5 PLATFOR
(kvaliteediklass: PJ)"

• Length [mm]: 136.9
• Width [mm]: 63.1
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 19.8
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.6
• Supplementary Article/Info 2: with screw set
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Axle Code: 741.412
• Brake Disc Type: solid
• Thickness [mm]: 20.2
• Length [mm]: 136.8
• Brake System: BOSCH
• Warning Contact Length [mm]: 95
• Height [mm]: 63
• Width [mm]: 136.8
• Fitting Position: Rear Axle
• Weight [kg]: 1.569
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Width [mm]: 136
• Thickness [mm]: 19
• Height [mm]: 63
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Manufacturer: FAST

• Fitting Position: Front Axle
• Width [mm]: 169.1
• Height [mm]: 73.4
• Thickness [mm]: 21
• Brake System: Brembo
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Diameter [mm]: 86.5
• Height [mm]: 100
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Packaging height [cm]: 12.3
• Net Weight [g]: 336
• Packaging length [cm]: 9.3
• Packaging width [cm]: 9.3
• Manufacturer: KNECHT
• Name: KN KL723D

Filter type: without connection for water sensor, In-Line Filter, without filter heating

• Filter type: with filter heating, In-Line Filter
• Height [mm]: 100
• Outer Diameter [mm]: 87
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Name: Ktusefilter
• Manufacturer: MAX
• Lisainfo: PF-4038
• Additional information: PF-4038

• Brake Disc Type: Vented
• Fitting Position: Rear Axle
• Width [mm]: 164.9
• Height [mm]: 78.1
• Thickness [mm]: 20.8
• Wear Warning Contact: prepared for wear indicator
• Brake System: Bosch
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• FMSI Code: D1318
• Test Mark: E1 90R-011041/1654
• WVA Number: 29217
• Brake System: Bosch
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 165
• Width 2 [mm]: 165
• Height 1 [mm]: 78.1
• Height 2 [mm]: 78.1
• Thickness 1 [mm]: 20.5
• Thickness 2 [mm]: 20.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1984

• Construction Year from: 05.2011
• Fitting Position: Rear Axle
• Height [mm]: 78.1
• Warning Contact Length [mm]: 95
• Number of wear indicators [per axle]: 2
• Width [mm]: 165
• Thickness [mm]: 20.5
• Brake System: BENDIX
• Manufacturer: LPR

• Length [mm]: 165
• Width [mm]: 78.1
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 20.5
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.589
• Supplementary Article/Info 2: with fastening material
• Name: SW 10 91 6709
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Axle Code: 741 .412, .415
• for SA code: 504025 20
• Length [mm]: 136.9
• Width [mm]: 63.1
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 19.8
• Brake System: Bosch
• Wear Warning Contact: incl. wear warning contact
• Weight [kg]: 1.51
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 07.2009
• Construction Year to: 03.2018
• Engine Code: 651.957
• Height [mm]: 125
• Outer Diameter [mm]: 87
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 10
• Weight [kg]: 0.383
• Manufacturer: VALEO
• Name: VA 587552

Filter type: without water separator, with filter heating, In-Line Filter

• Fitting Position: Rear Axle
• not for axle code: 741.412
• Brake Disc Type: internally vented
• Width [mm]: 165
• Height [mm]: 79
• Thickness [mm]: 20.6
• Wear Warning Contact: prepared for wear indicator
• Brake System: Bosch
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Construction Year from: 05.2011
• Fitting Position: Front Axle
• Brake System: BREMBO
• Warning Contact Length [mm]: 95
• Thickness [mm]: 20.5
• Height [mm]: 73.2
• Width [mm]: 169.1
• Number of wear indicators [per axle]: 2
• Manufacturer: LPR

• Filter type: with filter heating, In-Line Filter
• Height [mm]: 100
• Outer Diameter [mm]: 87
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Filter type: with filter heating, In-Line Filter
• Height [mm]: 100
• Outer Diameter [mm]: 86
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Manufacturer: DENCKERMANN FILTRY

• Construction Year from: 05.2011
• Fitting Position: Front Axle
• Height [mm]: 73.5
• Supplementary Article/Info 2: with bolts/screws
• Width [mm]: 169.1
• Supplementary Article/Supplementary Info: with accessories
• Brake System: BREMBO
• Thickness [mm]: 20.8
• Manufacturer: LPR

• Fitting Position: Front Axle
• Article number of recommended accessories: 98033700
• Width [mm]: 169
• Height [mm]: 73.5
• Thickness [mm]: 20.7
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Length [mm]: 169
• Width [mm]: 73
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.77
• Supplementary Article/Info 2: with fastening material
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Axle Code: 741 .412, .415
• for SA code: 504025 20
• Length [mm]: 136.9
• Width [mm]: 63.1
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 19.8
• Brake System: Bosch
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 1.74
• Supplementary Article/Info 2: with fastening material
• Name: SW 10 91 6708
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Axle Code: 741.412
• Brake Disc Type: solid
• Width [mm]: 137
• Height [mm]: 63
• Thickness [mm]: 19
• Number of wear indicators [per axle]: 2
• Brake System: Bosch
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Brake Disc Type: internally vented
• not for axle code: 741.412
• Width [mm]: 165
• Thickness [mm]: 21
• Height [mm]: 79
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Bosch
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 29217
• Manufacturer: BREMBO
• Name: BR P 50 060

• Length [mm]: 137
• Width [mm]: 63
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 20
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.6
• Supplementary Article/Info 2: with screw set
• Manufacturer: BLUEPRINT