Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fabrication Number: CPP-
ME- 034 - Cooling Hose: Oil Cooler Hoseline
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Material: Rubber with fabric lining
- Weight [kg]: 0.031
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cooling Hose: Output to Thermostat
- Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Engine Code: OM 651.957
- Length [mm]: 160
- Inner Diameter [mm]: 9.86
- Cooling Hose: from expansion tank to engine cooler
- Weight [kg]: 0.021
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cooling Hose: Oil Cooler Hoseline
- Manufacturer: FAST
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from expansion tank to engine cooler
- for OE number: 9065010682
- Name: Jahutusvoolik
- Manufacturer: SAS
- Fitting Position: after EGR cooler
- not for emission standard: Euro 3
- Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Water Pump
- Forward- /Backflow: Supply Line
- Manufacturer: METZGER
- Fitting Position: Upper
- Supplementary Article/Supplementary Info: with quick coupling
- Cooling Hose: from thermostat to radiator
- Inner Diameter 1 [mm]: 34
- Weight [kg]: 0.22
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- for OE number: 906 501 0182
- Name: JAHUTUSVOOLIK
- Manufacturer: TRU
- for OE number: 9065012982
- Fitting Position: Upper Left
- Material: Rubber
- Supplementary Article/Supplementary Info: with pipe socket
- Weight [g]: 234
- Length [mm]: 296
- Inner Diameter 1 [mm]: 33
- Inner Diameter 2 [mm]: 33
- Name: Jahutusvoolik
- Manufacturer: IMP
- Fitting Position: Water Pump
- Material: Plastic
- Supplementary Article/Supplementary Info: with quick lock
- Manufacturer: METZGER
- Fitting Position: Upper
- Colour: black
- Hose Length [mm]: 416
- Inner Diameter 1 [mm]: 33
- Inner Diameter 2 [mm]: 33
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Upper
- Cooling Hose: from thermostat to radiator
- Inner Diameter 1 [mm]: 34
- Manufacturer: FAST
- Inner Diameter 1 [mm]: 33
- Inner Diameter 2 [mm]: 33
- Weight [kg]: 0.44
- Colour: black
- Warranty: 3 years warranty
- Hose Length [mm]: 700
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
-
Engine Code: OM 651.955,
OM 651.957 - Cooling Hose: from thermostat to radiator
- Fitting Position: Upper
- Inner Diameter 1 [mm]: 34
- Weight [kg]: 0.24
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 906 501 2482
- Name: Jahutusvoolik
- Manufacturer: MAX
- Weight [kg]: 0.19
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Fitting Position: Lower Left
- Inner Diameter [mm]: 40
- Cooling Hose: from engine cooler to water pump
- Manufacturer: FAST
- Fitting Position: Lower
- Inner Diameter [mm]: 17
- Supplementary Article/Info 2: with quick couplers
- Cooling Hose: from engine to engine cooler
- Weight [kg]: 0.5
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 43SKV865
- for OE number: 17127578703
- Material: Rubber
- Supplementary Article/Supplementary Info: with pipe socket
- Weight [g]: 487
- Cooling Hose: from engine to water pump
- Length [mm]: 285
- Inner Diameter 1 [mm]: 33
- Inner Diameter 2 [mm]: 33
- Inner Diameter 3 [mm]: 16
- Name: Jahutusvoolik
- Manufacturer: IMP
- Fitting Position: Lower Right
- Manufacturer: FAST
- Fitting Position: Lower
- Colour: black
- Hose Length [mm]: 499
- Inner Diameter 1 [mm]: 33
- Inner Diameter 2 [mm]: 33
- Inner Diameter 3 [mm]: 16
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
-
Engine Code: OM 651.955,
OM 651.957 - Heating/Cooling: for vehicles with high performance radiator
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 47
- Cooling Hose: from engine to engine cooler
- Outer Diameter 1 [mm]: 42.5
- Outer Diameter 2 [mm]: 23.5
- Inner Diameter 1 [mm]: 32.5
- Inner Diameter 2 [mm]: 16.5
- Weight [kg]: 0.34
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: OM 651.957
- Inner Diameter [mm]: 17
- Cooling Hose: from engine to engine cooler
- Fitting Position: Lower Left
- Weight [kg]: 0.41
- Supplementary Article/Info 2: with quick couplers
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Lower Left
- Inner Diameter [mm]: 17
- Cooling Hose: from engine to engine cooler
- Manufacturer: FAST
- Outer Diameter 1 [mm]: 43
- Outer Diameter 2 [mm]: 24
- Inner Diameter 1 [mm]: 33
- Inner Diameter 2 [mm]: 17
- Manufacturer: FAST
- for OE number: 906 501 2482
- Name: JAHUTUSVOOLIK
- Manufacturer: TRU
- Material: Rubber with fabric lining
- Weight [kg]: 0.463
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks