Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle both sides
- Inner Diameter 1 [mm]: 12
- Weight [kg]: 0.055
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Left,
outer, Rear Axle Right - Manufacturer: GSP
- for OE number: 667 320 0073
- Inner Diameter [mm]: 12
- Fitting Position: Rear Axle both sides
- Manufacturer: TRUCKTEC AUTOMOTIVE
- Engine Code: OM 651.957
- Spring Type: for vehicles without air suspension
- Length [mm]: 36
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.082
- Manufacturer: SWAG
- Name: SW 10 79 0060
- Lisainfo: 10 79 0060 SWA
- Additional information: 10 79 0060 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: OM 651.957
- Spring Type: for vehicles without air suspension
- Length [mm]: 36
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.082
-
Name: Puks -
Kndmik DB P. / T. 507D- 8 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Length [mm]: 138
- Pipe Ø [mm]: 10
- paired article number: 9030224
- Manufacturer: KAMOKA
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 138
- Pipe Ø [mm]: 10
- paired article number: 9030223
- Manufacturer: KAMOKA
-
Engine Code: OM 651.955,
OM 651.957 - Fitting Position: Rear Axle
-
Vehicle Equipment: for vehicles with headlight levelling
(automatic) - Rod/Strut: Coupling Rod
- Length [mm]: 102.1
- Replace in pairs only:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Lisainfo: Link Stabiliser
- Additional information: Link Stabiliser
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- paired article number: VKDS 448024
- Length [mm]: 101
- Rod/Strut: Suspension Rod
- Supplementary Article/Supplementary Info: with synthetic grease
-
Thread Size 1: M10 x 1,
5 - Name: SK VKDS448024
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Name: DE TC7028
- Manufacturer: DELPHI
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rod/Strut: Coupling Rod
- Length [mm]: 140
- Diameter [mm]: 12
- Weight [kg]: 0.58
-
Name: DY 30-
72512 - Manufacturer: DYS
- Fitting Position: Front Axle Left
- Weight [kg]: 0.4
- Rod/Strut: Suspension Rod
- Packaging length [cm]: 17.3
- Packaging width [cm]: 7
- Packaging height [cm]: 7
- Manufacturer: FEBEST
-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Length [mm]: 140
- Diameter [mm]: 16
- Rod/Strut: Suspension Rod
- paired article number: 260796
- Weight [kg]: 0.58
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Fitting Position: Front Axle Right
- Base body material: Steel
- Rod/Strut: Push Rod
- Net weight [kg]: 0.42
- Length [mm]: 140
-
Thread Size: M12x1,
5 -
Thread Size 1: M12x1,
5 - paired article number: G20.5851
- Name: OMG G20.5850
- Manufacturer: OMG
- Fitting Position: Front Axle Left
- Base body material: Steel
- Rod/Strut: Push Rod
- Net weight [kg]: 0.42
- Length [mm]: 140
-
Thread Size: M12x1,
5 -
Thread Size 1: M12x1,
5 - paired article number: G20.5850
- Name: OMG G20.5851
- Manufacturer: OMG
- Fitting Position: Rear Axle both sides
- Rod/Strut: Coupling Rod
- Length [mm]: 140
- Weight [kg]: 0.58
- Manufacturer: RTS
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 138
- Thread Size 2: M12x1.5
-
paired article number: 30-
72959 - Weight [kg]: 0.24
-
Name: DY 30-
72958 - Manufacturer: DYS
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Length [mm]: 138
- Thread Size 2: M12x1.5
-
paired article number: 30-
72958 - Weight [kg]: 0.24
-
Name: DY 30-
72959 - Manufacturer: DYS
- Fitting Position: Rear Axle
- Width [mm]: 41
- Height [mm]: 50
- Weight [kg]: 0.58
- Material: Steel
- Rod/Strut: Coupling Rod
-
Thread Size 1: 12,
2 - Max. Length [mm]: 177
- Quality class: PJ
- Name: Stabilizer link left=right
Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
-
External Thread 2 [mm]: M12x1,
5 - Length [mm]: 138
- Weight [kg]: 0.37
- Manufacturer: RTS
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 212
- for OE number: 2E0511051F
- Manufacturer: SASIC
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 137
- paired article number: 818 0335 10
- SVHC: No SVHC present!
-
Name: Stabilisaator,
Stabilisaator - Manufacturer: FAG
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Thread Size: M12x1.5
- Thread Size 1: M12x1.5
- paired article number: TC1923
- Width [mm]: 70
- Height [mm]: 70
- Length [mm]: 137
- Manufacturer: DELPHI
- Name: DE TC1924
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Thread Size: M12x1.5
- Thread Size 1: M12x1.5
- paired article number: TC1924
- Width [mm]: 70
- Height [mm]: 70
- Length [mm]: 137
- Manufacturer: DELPHI
- Name: DE TC1923
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
-
External Thread 2 [mm]: M12x1,
5 - Length [mm]: 138
- Weight [kg]: 0.37
- Manufacturer: RTS
- Suspension: for vehicles with lifted suspension
- Rod/Strut: Suspension Rod
-
Fitting Position: Rear Axle,
both sides - Material: Steel
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
-
paired article number: V10-
7522 - Weight [kg]: 0.382
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Length [mm]: 137
- paired article number: 818 0336 10
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- for OE number: 2E0411317C
- paired article number: 2306004
- Manufacturer: SASIC
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
-
paired article number: V10-
7521 - Weight [kg]: 0.383
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Suspension: for vehicles with lifted suspension
- Rod/Strut: Suspension Rod
-
Fitting Position: Rear Axle,
both sides - Material: Steel
- Article number of recommended accessories: 43385 01
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles without lifted suspension
- Rod/Strut: Suspension Rod
-
Fitting Position: Rear Axle,
both sides - Material: Steel
- Article number of recommended accessories: 43385 01
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - Kndmik DB T. SPRINTER/CRAFTER 06- LE/PR
- Fitting Position: Front Axle Right
- Length [mm]: 138
-
Thread Size: M12x1,
5/ M12x1, 5 - Required quantity: 1
- Diameter [mm]: 10
- paired article number: 8500 236028
- Rod/Strut: Coupling Rod
-
Name: Stabilisaator,
Stabilisaator - Manufacturer: TRI
- Fitting Position: Front Axle Left
- Length [mm]: 138
-
Thread Size: M12x1,
5/ M12x1, 5 - Required quantity: 1
- Diameter [mm]: 10
- paired article number: 8500 236027
- Rod/Strut: Coupling Rod
-
Name: Stabilisaator,
Stabilisaator - Manufacturer: TRI
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 137
-
Thread Size 1: M12x1,
5 -
Thread Size 2: M12x1,
5 - Supplementary Article/Supplementary Info: with nuts
- reinforced version:
- Pipe Ø [mm]: 10
- Required quantity: 1
- replacement in pairs recommended:
- with environmental seal: Carbon neutral
-
paired article number: 016 060 0127/
HD -
Name: Stabilisaator,
Stabilisaator - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Length [mm]: 137
-
Thread Size 1: M12x1,
5 -
Thread Size 2: M12x1,
5 - Supplementary Article/Supplementary Info: with nuts
- reinforced version:
- Pipe Ø [mm]: 10
- Required quantity: 1
- replacement in pairs recommended:
- with environmental seal: Carbon neutral
-
paired article number: 016 060 0126/
HD -
Name: Stabilisaator,
Stabilisaator - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks