• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-VW-012
• Manufacturer: NTY

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 34
• Height [mm]: 100
• Transmission Code: DL501
• Manufacturer: KAMOKA FILTRY

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: 6-Speed Manual Transmission, Dual-Clutch Transmission

• Transmission Type: 8-Speed Automatic Transmission
• Filter type: Screen Filter
• Length [mm]: 485
• Width [mm]: 323
• Height [mm]: 46
• Weight [kg]: 0.523
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: FEB
• Additional information: 107 825 HP
• Lisainfo: 107 825 HP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Height [mm]: 100
• Outer Diameter [mm]: 34
• Weight [kg]: 0.044
• for OE number: 0B5 325 330 A
• Manufacturer: DENCKERMANN FILTRY

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Construction Year from: 06.2010
• Filter type: Filter Insert
• Shape: Cylindrical
• Supplementary Article/Info 2: with seal ring
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Code: 7G-DKG
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Height [mm]: 99
• Outer Diameter [mm]: 34
• SVHC: No SVHC present!
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAN

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Height [mm]: 100
• Outer Diameter [mm]: 34
• for OE number: 0B5 325 330 A
• Supplementary Article/Supplementary Info: with seal
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Filter type: Filter Insert
• Manufacturer: JAPKO

• Filter type: Pressure Filter, Filter Insert
• Transmission Type: 7-Speed Automatic Transmission
• for OE number: 0CK 325 121 D
• Fabrication Number: FSF-AU-016
• Name: NTY FSF-AU-016
• Manufacturer: NTY

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Height [mm]: 100
• Outer Diameter [mm]: 34
• Weight [kg]: 0.024
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB
• Lisainfo: 101965 FEBI
• Additional information: 101965 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Quantity Unit: Piece
• Transmission Code: 0B5, DL501
• Filter type: Pressure Filter
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MEY

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Height [mm]: 100
• Outer Diameter [mm]: 34
• Weight [kg]: 0.024
• Manufacturer: SWAG
• Name: SW 30 10 1965

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Filter type: Pressure Filter, Filter Insert
• Transmission Type: 7-Speed Automatic Transmission
• for OE number: 0CK 325 149 D
• Fabrication Number: FSF-AU-015
• Manufacturer: NTY
• Name: NTY FSF-AU-015

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Clutch: for vehicles with double clutch
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.024
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: S-Tronic 7-Gang
• Outer Diameter [mm]: 34
• Inner Diameter [mm]: 19
• Height [mm]: 100
• Manufacturer: HENGST FILTER

Transmission Type: Automatic Transmission, Manual-/optional automatic transmission

• Alternatively:
• Transmission Code: S-Tronic (DL501)
• Clutch: for vehicles with double clutch
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.034
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Height [mm]: 100
• Outer Diameter [mm]: 34
• Weight [kg]: 0.024
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Dual-Clutch Transmission
• Filter type: Screen Filter, Suction Filter
• Housing Type: Synthetic Material Housing
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Diameter [mm]: 34
• Height [mm]: 99.3
• Inner Diameter 2 [mm]: 19
• Height 1 [mm]: 93
• Packaging height [cm]: 10.9
• Net Weight [g]: 25
• Packaging length [cm]: 5.5
• Packaging width [cm]: 5.5
• Manufacturer: KNECHT
• Name: KN HX186D

• Filter type: Filter Insert
• Height [mm]: 87
• Outer Diameter [mm]: 32
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Version: DP1110.14.0007
• Weight [kg]: 0
• Outer Diameter [mm]: 34
• Filter type: Filter Insert
• Manufacturer: DRIVE

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DSG)
• Transmission Type: for 7-speed automatic transmission
• Clutch: for vehicles with double clutch
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Supplementary Article/Supplementary Info: with seal
• Fabrication Number: FSF-AU-004
• Transmission Code: DL501 / 0B5
• Filter type: Filter Insert
• Observe system fill quantity:
• Manufacturer: NTY
• Name: NTY FSF-AU-004

Transmission Type: 7-Speed Dual-Clutch Transmission, Automatic Transmission

• Filter type: Screen Filter
• Length [mm]: 231.5
• Width [mm]: 195.5
• Height [mm]: 118
• Weight [kg]: 0.325
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB

Transmission Type: 6-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Screen Filter
• Length [mm]: 197
• Width [mm]: 158
• Thickness [mm]: 95
• Material: Plastic
• Weight [kg]: 0.29
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB

Transmission Type: 7-Speed Dual-Clutch Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 8-Speed Automatic Transmission
• Filter type: Screen Filter
• Weight [kg]: 0.463
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Screen Filter
• Length [mm]: 197
• Width [mm]: 158
• Thickness [mm]: 95
• Material: Plastic
• Weight [kg]: 0.29
• Name: SW 30 10 2142
• Manufacturer: SWAG

Transmission Type: 7-Speed Dual-Clutch Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: for 8-speed automatic transmission
• Length [mm]: 485
• Width [mm]: 323
• Height [mm]: 46
• Weight [kg]: 0.634
• Supplementary Article/Info 2: with oil sump gasket
• for OE number: 0BK 398 009 A
• Manufacturer: DENCKERMANN FILTRY

• Engine Code: CGLB
• Transmission Type: 8-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: without gasket/seal
• Quantity Unit: Piece
• Transmission Code: 8HP55
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Filter type: Filter Insert
• Fabrication Number: FSF-AU-014
• Manufacturer: NTY
• Name: NTY FSF-AU-014

• Transmission Code: S-Tronic (DL501)
• Clutch: for vehicles with double clutch
• See accessories list for additionally required parts:
• Weight [kg]: 0.321
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Screen Filter
• Length [mm]: 232
• Width [mm]: 196
• Height [mm]: 118
• Weight [kg]: 0.325
• Manufacturer: BLUE PRINT

Transmission Type: 6-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Clutch: for vehicles with double clutch
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: VW
• Quantity Unit: Set
• Transmission Code: DL501, 0B5
• Number of mounting bores: 15
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission

• Construction Year to: 07.2011
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: Audi S-Tronic
• Quantity Unit: Set
• Transmission Code: 0B5, DL501
• Supplementary Article/Info 2: with cap
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 161
• Height [mm]: 92
• Transmission Code: DL501
• Manufacturer: KAMOKA FILTRY

Transmission Type: 7-Speed Automatic Transmission, Automatic Transmission, 7-Speed Dual-Clutch Transmission

• Construction Year from: 07.2011
• Recommended change interval [years]: 5
• Recommended change interval [km]: 60,000
• Quantity Unit: Set
• Filter type: Filter Insert
• Transmission Code: 0B5, S-Tronic (DL501)
• Supplementary Article/Info 2: with lid
• Supplementary Article/Supplementary Info: with seal
• Clutch: for vehicles with double clutch
• See accessories list for additionally required parts:
• Weight [kg]: 0.107
• Manufacturer: VAICO

Transmission Type: 7-Speed Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CCL-AU-041
• Manufacturer: NTY

Lisainfo: /AUTOMATYCZNEJ SKRZYNI BIEG£W/AUDI A4 B8 2011-,A5 2007-,A6 C7 2010-,A7 2011-,Q5 2011-,PORSCHE MACAN 2014-/SKRZYNIA BIEG£W Z PODW£JNYM SPRZGœEM 7-BIEGOWA/ Additional information: /AUTOMATYCZNEJ SKRZYNI BIEG£W/AUDI A4 B8 2011-,A5 2007-,A6 C7 2010-,A7 2011-,Q5 2011-,PORSCHE MACAN 2014-/SKRZYNIA BIEG£W Z PODW£JNYM SPRZGœEM 7-BIEGOWA/

• Filter type: Filter Insert
• General Information: gearbox oil filter
• Manufacturer: VIKA

• Width [mm]: 90
• Height [mm]: 50
• for OE number: 0B5 325 429 E S1
• Supplementary Article/Supplementary Info: with seal
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Construction Year from: 07.2011
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: Audi S-Tronic
• Quantity Unit: Set
• Transmission Code: DSG, DL501, 0B5
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Transmission Code: 0CJ, 0CL, DL382, 0CK
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Pressure Filter, Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• for OE number: 0CK 325 149 D
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: METALCAUCHO

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DSG)
• Transmission Type: for 7-speed automatic transmission
• Supplementary Article/Supplementary Info: with seal
• Clutch: for vehicles with double clutch
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Screen Filter
• Length [mm]: 232
• Number of mounting bores: 13
• Width [mm]: 195
• Height [mm]: 142
• Weight [kg]: 0.325
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: FEB
• Additional information: FE107830
• Lisainfo: FE107830

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Dual-Clutch Transmission
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with seal
• for components see parts list:
• Observe system fill quantity:
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: Filter Insert
• Length [mm]: 197.5
• Width [mm]: 161
• Height [mm]: 94.5
• Inner Diameter 2 [mm]: 29
• Transmission Code: S-Tronic (DL501)
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Metal Elastomer Gasket
• Number of Holes: 15
• Recommended change interval [km]: 60,000
• Net Weight [g]: 372
• Packaging length [cm]: 38
• Packaging width [cm]: 45
• Packaging height [cm]: 5
• Manufacturer: KNECHT
• Name: KN HX185D

Transmission Type: Automatic Transmission, 7-Speed Dual-Clutch Transmission

• Transmission Type: Manual-/optional automatic transmission
• Manufacturer: HENGST FILTER

• Transmission Type: 6-Speed Automatic Transmission
• Length [mm]: 232
• Weight [kg]: 0.3
• Filter type: Screen Filter
• Manufacturer: DRIVE

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Length [mm]: 197
• Width [mm]: 90
• Height [mm]: 50
• Weight [kg]: 0.33
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: FEB
• Lisainfo: 109100 FEBI
• Additional information: 109100 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Model Year from: 2011
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: DL501, 0B5
• Supplementary Article/Info 2: with seal ring
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Transmission Code: 0CJ, 0CL, DL382, 0CK
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Pressure Filter, Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• for OE number: 0CK 325 121 D
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: for 7-speed automatic transmission, Dual-Clutch Transmission

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Length [mm]: 197
• Width [mm]: 90
• Height [mm]: 50
• Weight [kg]: 0.33
• Supplementary Article/Info 2: with oil sump gasket
• Name: SW 30 10 9100
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: 0CJ, 0CL, DL382, 0CK
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Suction Filter, Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Length [mm]: 197
• Width [mm]: 90
• Height [mm]: 50
• Weight [kg]: 0.33
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Screen Filter
• Length [mm]: 232
• Number of mounting bores: 13
• Width [mm]: 195
• Height [mm]: 142
• Weight [kg]: 0.325
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: 0CJ, 0CL, DL382, 0CK
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Suction Filter, Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Version: DP1110.14.0022
• Length [mm]: 197
• Weight [kg]: 0.3
• Filter type: Screen Filter
• Manufacturer: DRIVE

• Model Year from: 2011
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: DL501, 0B5
• Alternative Repair Kit: 8020089
• Supplementary Article/Info 2: with filter, with seal ring
• Supplementary Article/Supplementary Info: with oil filter housing
• Manufacturer: METZGER

• Transmission Code: DSG, DL501, 0B5
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: VW
• Quantity Unit: Set
• Number of mounting bores: 15
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: DL501 / 0B5, PDK
• Supplementary Article/Supplementary Info: with seal
• Material: Rubber/Metal
• Manufacturer: METZGER

• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Supplementary Article/Supplementary Info: with seal
• Clutch: for vehicles with double clutch
• Transmission Code: S-Tronic (DL501)
• See accessories list for additionally required parts:
• Weight [kg]: 0.516
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Manual-/optional automatic transmission
• Manufacturer: HENGST FILTER

• Transmission Code: 0CJ, 0CK, 0CL, DL382
• Supplementary Article/Supplementary Info: with seal
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• See accessories list for additionally required parts:
• Manufacturer: VAICO

Transmission Type: Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.