Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 28.5
- Seal Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Name: RONGASTIHEND
- Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Transmission Type: Manual Transmission
- Core Length [mm]: 720
- Core Width [mm]: 469
- Core Depth [mm]: 26
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: MAX
- Lisainfo: Puudub automaatkasti radikas.
- Additional information: Puudub automaatkasti radikas.
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Weight [kg]: 0.112
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Core Length [mm]: 720
- Core Width [mm]: 469
- Core Depth [mm]: 26
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Brazed cooling fins
- Manufacturer: KAMOKA
- Transmission Type: Automatic Transmission
- Inlet Ø [mm]: 33
- Outlet Ø [mm]: 33
- Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
- Manufacturer: TYC
-
Transmission Type: 6-
Speed Manual Transmission - Cooling fins material: Aluminium
- Core Depth [mm]: 26
- Core Length [mm]: 720
- Core Width [mm]: 468
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 26
- Core Length [mm]: 720
- Core Width [mm]: 468
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Climate Zones: not for hot climate zones,
for hot climate zones - Block Separation:
- Material: Aluminium
-
Heating/Cooling: for vehicles with combined radiator/
oil cooler - Core Length [mm]: 720
- Core Width [mm]: 466
- Core Depth [mm]: 27
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Lisainfo: 720*475*26
- Additional information: 720*475*26
Transmission Type: 6-Speed Manual Transmission, 7-Speed Automatic Transmission
- Core Length [mm]: 720
- Core Width [mm]: 475
- Core Depth [mm]: 26
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 120.5
- Packaging width [cm]: 65.5
- Packaging height [cm]: 18
- Weight [kg]: 3.462
- Manufacturer: AKSDASIS
- Core Length [mm]: 720
- Core Width [mm]: 475
- Core Depth [mm]: 26
- Transmission Type: Automatic Transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Brazed cooling fins
- Packaging length [cm]: 120.5
- Packaging width [cm]: 65.5
- Packaging height [cm]: 18
- Weight [kg]: 2.982
- Manufacturer: AKSDASIS
- Transmission Type: Automatic Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 722
- Core Width [mm]: 470
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 26
- Core Length [mm]: 720
- Core Width [mm]: 469
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Name: Radiaator,
mootorijahutus - Manufacturer: NIS
-
Lisainfo: AUDI A 4 /
S 4 (B8) (07- ) 1.8 TFSI -
Additional information: AUDI A 4 /
S 4 (B8) (07- ) 1.8 TFSI
- Name: Radiator
- Quality class: PJ
Lisainfo: A4 (kvaliteediklass PJ)
-
Transmission Type: 6-
Speed Manual Transmission, Manual Transmission - Climate Zones: for hot climate zones
- New Part:
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 477
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Packaging width [cm]: 14
-
Net Weight [g]: 4,
641 - Packaging height [cm]: 67
- Packaging length [cm]: 97
- Manufacturer: MAHLE
- Name: MH CR905000P
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Name: Radiator
- Quality class: PJ
Lisainfo: A4 (kvaliteediklass PJ)
-
Transmission Type: 6-
Speed Manual Transmission, Manual Transmission - Climate Zones: not for hot climate zones
- New Part:
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 480
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Cooling fins material: Aluminium
- Manufacturer: MAHLE
- Packaging width [cm]: 12.5
-
Net Weight [g]: 3,
239 - Packaging height [cm]: 62.5
- Packaging length [cm]: 95.5
-
Name: Radiaator,
mootorijahutus
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Transmission Type: Automatic Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 26
- Core Length [mm]: 720
- Core Width [mm]: 469
- Radiator type: Brazed cooling fins
- Supplementary Article/Supplementary Info: with oil cooler
- Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: PORSCHE MACAN
(95B) (14- ) 2.0 i TURBO -
Additional information: PORSCHE MACAN
(95B) (14- ) 2.0 i TURBO
- for OE number: 8K0121251L
-
Weight [g]: 4,
802 - Core Length [mm]: 720
- Core Width [mm]: 467
- Core Depth [mm]: 28
-
Gross Weight [g]: 6,
482 - Manufacturer: DENSO
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Core Width [mm]: 720
- Core Length [mm]: 475
- Core Depth [mm]: 26
- Material: Aluminium
- Housing Type: Synthetic Material Housing
- Inlet Ø [mm]: 33
- Outlet Ø [mm]: 33
- Heating/Cooling: for vehicles with oil cooler
- Supplementary Article/Info 2: without coolant regulator
- Radiator type: Brazed cooling fins
- Weight [kg]: 5.89
- Manufacturer: VALEO
- Name: Radiator
- Quality class: Q
Lisainfo: "Tootja: OEM/OES
A4
(kvaliteediklass: Q)"
-
Transmission Type: for 7-
speed automatic transmission - Radiator type: Brazed cooling fins
- Core Length [mm]: 868
- Core Width [mm]: 475
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Packaging width [cm]: 13.5
-
Net Weight [g]: 4,
687 - Packaging height [cm]: 66
- Packaging length [cm]: 96.5
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Name: Radiator
- Quality class: Q
Lisainfo: "Tootja: OEM/OES (BEHR)
A4
(kvaliteediklass: Q)"