• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Name: Rongastihend,mootorioli tasemeandur
• Manufacturer: ELR

• Fabrication Number: ECC-AU-004
• Socket colour: brown
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring

• Quantity: 1
• Supplementary Article/Info 2: with seal ring
• Colour Coding: brown
• Weight [kg]: 0.031
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• General Information: oil pressure switch
• Manufacturer: VIKA

• Quantity: 1
• Pressure [bar]: 0.5
• General Information: oil pressure switch；0.5Bar
• Manufacturer: VIKA

• Engine Code: CAHA
• Colour: brown
• Thread Size: M10x1
• Spanner Size: 24
• Supplementary Article/Supplementary Info: with seal
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Connector Shape: D Shape
• Operating Mode: Hydraulic
• Colour Coding: brown
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 0,55 - 0,85
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Corresponds to the original part in colour: brown
• Pressure from [bar]: 0.5
• Thread Size: M10X1
• Spanner Size: 24
• Manufacturer: MEAT&DORIA

• Fabrication Number: ECC-AU-007
• Thread Size: M10x1
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Socket colour: green
• Manufacturer: NTY

• for OE number: 03C 919 081
• Thread Size: M10 x 1
• Colour: black
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.6
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Engine Code: CAHA
• Thread Size: M10x1
• Spanner Size: 22
• Colour Coding: brown
• Number of pins: 1
• Pressure from [bar]: 0.55
• Pressure to [bar]: 0.85
• Name: OLISURVELšLITUS
• Manufacturer: MAX
• Lisainfo: 21-0359
• Additional information: 21-0359

• Connector Shape: D Shape
• Operating Mode: Hydraulic
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.6
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Supplementary Article/Info 2: with seal ring
• Colour Coding: brown
• Weight [kg]: 0.031
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• General Information: oil pressure switch
• Manufacturer: VIKA

• Engine Code: CAHA
• Pressure [bar]: 8.5
• Housing Colour: dark-brown
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Pressure [bar]: 0.7
• Thread Size: M10 x 1
• Number of pins: 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Engine Code: CAHA
• Colour: brown
• Pressure to [bar]: 0.85
• Pressure from [bar]: 0.55
• Pressure [bar]: 1
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• General Information: oil pressure switch
• Manufacturer: VIKA

• Engine Code: CGLB, CMGA
• Pressure [bar]: 0.5
• Housing Colour: black
• Thread Size: M10*1
• Diameter [mm]: 50
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI

• Thread Size: M 10x1
• Housing Colour: brown
• Pressure [bar]: 0.7
• Manufacturer: FAE

• Engine Code: CAHA
• Weight [kg]: 0.041
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M10 x 1mm
• Colour: black
• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.6
• Number of pins: 1
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thickness [mm]: 3.7
• for OE number: 12617604790
• Inner Diameter [mm]: 39.5
• Outer Diameter [mm]: 47.5
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: AJU

• Engine Code: CAHA
• Switch Pressure [bar]: 0.7
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Number of pins: 2
• Name: Andur, ktusetemperatuur
• Manufacturer: MAX

• Quantity: 1
• Colour: brown
• Control Range [bar]: 0.55/0.85BAR
• General Information: oil pressure switch
• Manufacturer: BORSEHUNG

• Engine Code: CGLB, CGLB/CMGA
• Colour: green
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 1
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Fitting Position: Oil Filter Housing
• for PR number: TD1
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.033
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CMGA, CGLB
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.6
• External Thread Size: M10 x 1
• Spanner Size: 24
• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CMGA, CGLB
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.6
• External Thread Size: M10 x 1
• Spanner Size: 24
• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: SW 62 93 7031
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure from [bar]: 0.55
• Pressure to [bar]: 0.85
• Combi Switch Function: Normally Open Contact
• Colour: brown
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Engine Code: CGLB, CMGA
• for PR number: TM4
• Number of pins: 1
• Thread Size: M10x1
• Switch pressure from [bar]: 0.3
• Switch pressure to [bar]: 0.6
• Corresponds to the original part in colour: dark green, black
• Manufacturer: METZGER

• Engine Code: CGLB, CMGA
• Voltage [V]: 12
• Combi Switch Function: Normally Open Contact
• Thread Size: M 10x1
• Spanner Size: 24
• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.6
• Number of pins: 1
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Name: Olisurvellitus
• Manufacturer: HEL

• Housing Colour: black
• Observe technical data:
• Manufacturer Restriction: VAG
• Socket Width [mm]: 1.5
• Number of pins: 1
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.5
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabliparanduskomplekt, olisurvelliti
• Manufacturer: HBE

• Fitting Position: Oil Filter Housing
• for PR number: TD1
• Number of pins: 2
• Thread Size: M10x1
• Pressure from [bar]: 2.3
• Pressure to [bar]: 3
• Corresponds to the original part in colour: brown
• Manufacturer: METZGER

• Number of pins: 1
• Plug Type: Female
• Number of circuits: 1
• Material: CuSn (copper-tin)
• Cable Length [mm]: 250
• Cable cross-section from [mm²]: 0.75
• Cable cross-section to [mm²]: 0.75
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with shrink squeeze connector
• for OE number: 1J0973081, 1J0973701
• Manufacturer: METZGER

• General Information: oil level sensor
• Manufacturer: VIKA

• Construction Year from: 11.2011
• Engine Code: CGLB, CMGA
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Material: Plastic
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 3
• Number of mounting bores: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: CGLB, CMGA
• Voltage [V]: 12
• Number of pins: 3
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV394

• Construction Year to: 10.2011
• Voltage [V]: 12
• Number of pins: 3
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV392

• Construction Year to: 10.2011
• Engine Code: CGLB, CMGA
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: CGLB, CGLB/CMGA
• Construction Year from: 11.2011
• Sensor Length [mm]: 111.5
• Manufacturer: EPS

• Engine Code: CAHA, CGLB, CMGA
• Number of pins: 3
• Weight [kg]: 0.13
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV754
• Manufacturer: ESEN SKV

• Engine Code: CGLB, CGLB/CMGA
• Construction Year to: 10.2011
• Sensor Length [mm]: 115.3
• Manufacturer: EPS

• Production date from: 20.10.2008
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
• Number of mounting bores: 3
• Housing Type: Synthetic Material Housing
• Overall Length [mm]: 130
• Housing material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic)
• Housing Colour: black
• Vehicle Equipment: for vehicles with oil level sensor
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Production date from: 20.10.2008
• Connector Shape: round
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• for OE number: 04L 907 660 B
• Name: Andur,Mootoriolitase
• Manufacturer: MD