Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: inner,
Front, outer, Rear - Block Separation:
- for PR number: 7X5
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
-
Lisainfo: Sensor,
park assist sensor -
Additional information: Sensor,
park assist sensor
-
Fitting Position: Front,
Rear - Sensor Type: Ultrasonic Sensor
- Number of connectors: 3
-
Lisainfo: Sensor,
park assist sensor -
Additional information: Sensor,
park assist sensor
-
Supplementary Article/Info 2: with adhesive film,
Holder may need adaptation - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Mounting Type: Glued
- Height 1 [mm]: 27.5
- Height 2 [mm]: 35
- Manufacturer: METZGER
- Construction Year from: 11.2012
-
Fitting Position: inner,
Rear, Front, both sides, outer, Centre -
Fabrication Number: EPDC-
AU- 008 - Manufacturer: NTY
-
Name: NTY EPDC-
AU- 008
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: both sides,
Rear, Front, inner, outer -
Fabrication Number: EPDC-
AU- 007 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Mounting Type: Glue on
- Vehicle Equipment: for vehicles with parking distance control
-
Version: V99-
72- 0002 - Weight [kg]: 0.007
- Manufacturer: VEMO
-
Lisainfo: V99-
72- 0002 VEM -
Additional information: V99-
72- 0002 VEM
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front,
Rear - Number of pins: 3
- Supplementary Article/Supplementary Info: with seal
-
Fabrication Number: EPDC-
VW- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: outer,
Front -
Fabrication Number: EPDC-
AU- 011 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: both sides,
Rear -
Fabrication Number: EPDC-
VW- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: inner,
outer, Front, Rear - Block Separation:
- for PR number: 7X5
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Colour: black
- Number of pins: 3
- Supplementary Article/Supplementary Info: with seal
-
Name: SENSOR,
PARKIMISABI - Manufacturer: MAX
-
Lisainfo: 27-
1293 -
Additional information: 27-
1293
- Fitting Position: Rear
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Left,
Right, outer, Front -
Vehicle type: Caddy,
Caddy Maxi - Required quantity: 2
- for PR number: 7X5
- Block Separation:
- Voltage [V]: 12
- Sensor Type: Ultrasonic Sensor
- Weight [kg]: 0.02
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV046
Vehicle Equipment: for vehicles with semi-automatic parking assistant system
-
Fitting Position: Left,
Right - Colour: black
- Supplementary Article/Supplementary Info: with seal
- Name: MM SDP097
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Rear
- Colour: black
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: MAGNETI MARELLI
- Name: MM SDP114
- Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ)
- Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ)
- Fitting Position: Rear
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of connectors: 3
-
Chemical Properties: Over-
paintable - Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
-
Fitting Position: Front,
outer, Rear, inner - Sensor Type: Ultrasonic Sensor
- Colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of connectors: 3
- Chemical Properties: Paintable
- Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
-
Fitting Position: inner,
Rear, Front - Sensor Type: Ultrasonic Sensor
- Colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with seal
- Number of connectors: 3
- Chemical Properties: Paintable
- Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
- Sensor Type: Ultrasonic Sensor
- Fitting Position: Rear
- Colour: black
- Shape: angled
- Chemical Properties: Paintable
- Manufacturer: FAST
-
Fitting Position: Front,
Left, Longitudinal, Right, Front and Rear - Voltage [V]: 12
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Weight [kg]: 0.02
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV070
- Fitting Position: Front
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Number of pins: 3
- Length [mm]: 41
- Diameter [mm]: 16
-
Name: SENSOR,
PARKIMISABI - Manufacturer: MAX
-
Fitting Position: Left,
Right, outer, Front - Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of connectors: 3
-
Chemical Properties: Over-
paintable - Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
- Fitting Position: Rear
- Manufacturer: FAST
-
Fitting Position: Front,
outer -
Vehicle Identification Number (VIN) from: 2K-
B- 200 001 -
Manufacturer Restriction: Renault,
VAG - Cable Length [mm]: 175
- Number of pins: 3
- Cable Cross Section [mm²]: 0.75
-
Contact surface: Silver-
plated - Plug Type ID: Code B
-
Supplementary Article/Supplementary Info: with socket housing,
with seal - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
-
Name: Kaabliparanduskomplekt,
olisurvelliti - Manufacturer: HBE
- Fitting Position: Rear
- Production date to: 27.05.2012
- Colour Code: GRU
- Colour: black
- Surface: primed
- Number of pins: 3
- Sensor Type: Ultrasonic Sensor
- Supplementary Article/Supplementary Info: with seal
- Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 11.2012
- Quantity: 4
-
Fitting Position: both sides,
Front, Rear -
for PR number: 7X1,
2JB, 2JG, 2JV, 2JX - Number of pins: 3
- Sensor Type: Ultrasonic Sensor
- Manufacturer: ZZVF
- for OE number: 3C0 919 275 S
-
Fitting Position: Rear,
Front -
Name: SENSOR,
PARKIMISABI - Manufacturer: TRU
- Sensor Type: Ultrasonic Sensor
-
Fitting Position: Front,
Rear - Voltage [V]: 12
- Number of pins: 3
- Shape: angled
- Manufacturer: FAST
- Quantity: 4
-
Fitting Position: inner,
Rear, Front - for PR number: 7X5
- Number of pins: 3
Vehicle Equipment: for vehicles with semi-automatic parking assistant system
- Fitting Position: Front
- General Information: ultrasound sensor; front; outer
- Manufacturer: VIKA
- Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ)
-
Fitting Position: inner,
Front, outer, Rear - Block Separation:
- for PR number: 7X5
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Colour: black
- Colour Code: 9B9
- Number of pins: 3
- Supplementary Article/Supplementary Info: with seal
- Always compare old and new part (in particular OE No.):
-
Name: SENSOR,
PARKIMISABI - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Quantity: 2,
4 - Construction Year from: 05.2012
- Fitting Position: Rear Axle
- General Information: ultrasound sensor; rear
- Manufacturer: VIKA
-
for model code: Caddy,
Caddy Maxi -
Fitting Position: inner,
Left, Right, Rear, both sides - Quantity: 4
-
for PR number: 7X5,
2JB, 7X1, 2JG, 2JV, 2JX - Block Separation:
- Construction Year from: 11.2012
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Diameter [mm]: 15.35
- Chemical Properties: Paintable
-
Name: Sensor,
parkimisabi - Manufacturer: TRI
Vehicle Equipment: for vehicles with semi-automatic parking assistant system
- Construction Year to: 10.2012
-
for model code: Caddy,
Caddy Maxi -
Fitting Position: both sides,
Rear - Quantity: 4
-
for PR number: 7X1,
2JB - Block Separation:
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Diameter [mm]: 15.36
- Chemical Properties: Paintable
-
Name: Sensor,
parkimisabi - Manufacturer: TRI
- Fitting Position: inner
- Manufacturer Restriction: VAG
- Plug Type ID: Code A
- Cable Length [mm]: 175
- Number of pins: 3
- Cable Cross Section [mm²]: 0.75
-
Contact surface: Silver-
plated - Cable insulation material: Silicone
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
heitgaasi rohuandur - Manufacturer: HBE
-
for model code: Caddy,
Caddy Maxi -
Fitting Position: outer,
Left, Right, Front - Quantity: 2
- for PR number: 7X5
- Block Separation:
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Diameter [mm]: 15.31
- Chemical Properties: Paintable
-
Name: Sensor,
parkimisabi - Manufacturer: TRI
Vehicle Equipment: for vehicles with semi-automatic parking assistant system
-
Fitting Position: Rear,
inner -
for combined PR number: 2JG+7X5,
2JX+7X5, 2JB+7X5 - Block Separation:
- Production date from: 05.11.2012
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Colour: black
- Number of pins: 3
- Supplementary Article/Supplementary Info: with seal
- Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year to: 10.2012
-
Fitting Position: both sides,
Rear -
for PR number: 7X1,
2JB -
Chemical Properties: Over-
paintable - Colour: black
- Number of pins: 3
- Shape: angled
- Sensor Type: Ultrasonic Sensor
-
Name: Sensor,
parkimisabi - Manufacturer: MEY
- Fitting Position: Rear
- Colour: black
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of pins: 3
- Number of connectors: 3
-
Chemical Properties: Over-
paintable - Housing Colour: black
- See accessories list for additionally required parts:
-
Article number of recommended accessories: V99-
72- 0002 - Weight [kg]: 0.018
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front,
Rear, lateral installation -
Vehicle Identification Number (VIN) from: 2K-
B- 200001 - Sensor Type: Ultrasonic Sensor
- Colour: black
- Diameter [mm]: 15.5
- Number of pins: 3
- Connector Shape: oval
- for OE number: 1S0 919 275
- Manufacturer: MEAT&DORIA
-
Fitting Position: Front,
Rear - Length [mm]: 40
- Width [mm]: 23
- Height [mm]: 26
- Colour: black
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of pins: 3
- Number of connectors: 3
- Chemical Properties: Paintable
- Housing Colour: black
- Weight [kg]: 0.014
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 11.2012
- Required quantity: 4
-
Fitting Position: both sides,
Rear -
for PR number: 2JB,
7X1, 2JG, 2JV, 2JX - Vehicle type: Caddy
- Number of pins: 3
- Chemical Properties: Paintable
- Mounting Type: Plugged
- Socket colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with fastening ring
- Shaft form: round
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PX358141081
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year to: 10.2012
- Required quantity: 4
-
Fitting Position: both sides,
Rear -
for PR number: 7X1,
2JB - Vehicle type: Caddy
- Number of pins: 3
- Chemical Properties: Paintable
- Mounting Type: Plugged
- Socket colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with fastening ring
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PX358141201
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Required quantity: 2
-
Fitting Position: both sides,
outer, Front - for PR number: 7X5
- Vehicle type: Caddy
- Number of pins: 3
-
Chemical Properties: Over-
paintable - Mounting Type: Plugged
- Socket colour: black
- Shaft form: round
- Supplementary Article/Supplementary Info: with fastening ring
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PX358141771
- Manufacturer: HELLA
Vehicle Equipment: for vehicles with semi-automatic parking assistant system Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: Rear
- Sensor Type: Ultrasonic Sensor
- Colour: black
- Number of pins: 3
- Connector Shape: oval
- for OE number: 7L5 919 275 B
-
Name: Sensor,
parkimisabi - Manufacturer: MD
- Fitting Position: Vehicle Front
- Supplementary Article/Info 2: without sensor
- Model Year from: 2011
- Model Year to: 2016
-
Name: Kaabli remondikomplekt,
sensor- parkimisabi - Manufacturer: ABA
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Fitting Position: Left,
Right, outer, Front - Colour: black
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of pins: 3
- Number of connectors: 3
-
Chemical Properties: Over-
paintable - Housing Colour: black
- Weight [kg]: 0.016
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 11.2012
- Vehicle Equipment: for vehicles with painted bumpers
-
Fitting Position: outer,
inner, Left, Right, Front, Rear - Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 31
- Width [mm]: 22
- Height [mm]: 35.9
- Number of pins: 3
- Diameter [mm]: 15.5
- Weight [kg]: 0.026
-
Name: SENSOR,
PARKIMISABI - Manufacturer: VAL
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 41
- Width [mm]: 22
- Height [mm]: 26.3
- Number of pins: 3
- Diameter [mm]: 15.5
- Weight [kg]: 0.03
-
Name: SENSOR,
PARKIMISABI - Manufacturer: VAL
Fitting Position: outer, Longitudinal, inner, Left, Right, Front, Rear
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 41
- Width [mm]: 22
- Height [mm]: 29.2
- Number of pins: 3
- Diameter [mm]: 16.1
- Weight [kg]: 0.03
- Manufacturer: VALEO
- Additional information: 890008 VALEO
- Lisainfo: 890008 VALEO
Fitting Position: Longitudinal, Left, Right, Front, Rear, lateral installation
- Quality class: Q
Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"
- Quality class: Q
Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"
- Supplementary Article/Info 2: with sensor
- Number of sensors: 4
-
Fitting Position: Front,
Rear -
Colour: black,
Mat - Sensor Type: Ultrasonic Sensor
- Vehicle Equipment: for vehicles with trailer hitch
- Gauge: without Display
- Mounting Type: mounting
- Rated Voltage [V]: 12
- Range from [m]: 0.1
- Range to [m]: 1.7
- for vehicle width to [m]: 2.2
- Height adjustment from [cm]: 40
- Height adjustment to [cm]: 65
-
Parking distance control sensor reflection angle: Sensor reflection angle:
0 to 5 degrees - Parameter Programming, PPS (parking distance control): with parameter programming PPS
- Mounting Time from (in hours): 1.5
- DIN/ISO: 17386
- Chemical Properties: Paintable
- Weight [kg]: 1.2
- Name: PARKIMISABI
- Manufacturer: VAL
- Lisainfo: VAL632200
- Additional information: VAL632200
Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation General Information: Activation of the front sensors through the main brake
- Supplementary Article/Info 2: with sensor
- Number of sensors: 4
-
Fitting Position: Front,
Rear -
Colour: black,
Mat - Sensor Type: Ultrasonic Sensor
- Vehicle Equipment: for vehicles with trailer hitch
- Gauge: without Display
- Mounting Type: Plugged
- Rated Voltage [V]: 12
- Range from [m]: 0.1
- Range to [m]: 1.7
- for vehicle width to [m]: 2.2
- Height adjustment from [cm]: 40
- Height adjustment to [cm]: 65
-
Parking distance control sensor reflection angle: Sensor reflection angle:
0 to 5 degrees - Parameter Programming, PPS (parking distance control): with parameter programming PPS
- Mounting Time from (in hours): 1.5
- DIN/ISO: 17386
- Chemical Properties: Paintable
- Weight [kg]: 1.2
- Manufacturer: VALEO
Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation
- Supplementary Article/Info 2: with sensor
- Number of sensors: 4
-
Fitting Position: Front,
Rear -
Colour: black,
Mat - Sensor Type: Ultrasonic Sensor
- Vehicle Equipment: for vehicles with trailer hitch
- Gauge: with LCD colour display
- Mounting Type: mounting
- Rated Voltage [V]: 12
- Range from [m]: 0.1
- Range to [m]: 1.7
- for vehicle width to [m]: 2.2
- Height adjustment from [cm]: 40
- Height adjustment to [cm]: 65
-
Parking distance control sensor reflection angle: Sensor reflection angle:
0 to 5 degrees - Parameter Programming, PPS (parking distance control): with parameter programming PPS
- Mounting Time from (in hours): 1.5
- DIN/ISO: 17386
- Chemical Properties: Paintable
- Weight [kg]: 1.22
- Manufacturer: VALEO
Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation General Information: Activation of the front sensors through the main brake
- Supplementary Article/Info 2: with sensor
- Number of sensors: 8
- Fitting Position: Front and Rear
-
Colour: black,
Mat - Sensor Type: Ultrasonic Sensor
- Vehicle Equipment: for vehicles with trailer hitch
- Gauge: with LCD colour display
- Mounting Type: mounting
- Rated Voltage [V]: 12
- Range from [m]: 0.1
- Range to [m]: 1.7
- for vehicle width to [m]: 2.2
- Height adjustment from [cm]: 40
- Height adjustment to [cm]: 65
-
Parking distance control sensor reflection angle: Sensor reflection angle:
0 to 5 degrees - Parameter Programming, PPS (parking distance control): with parameter programming PPS
- Trailer Hitch: without parking distance control deactivation
- Mounting Time from (in hours): 3
- DIN/ISO: 17386
- Chemical Properties: Paintable
- Weight [kg]: 2.08
- Name: PARKIMISABI
- Manufacturer: VAL
- Lisainfo: VAL632202
- Additional information: VAL632202
Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear General Information: Activation of the front sensors through the main brake