• Construction Year to: 10.2013
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Block Separation:
• Construction Year from: 11.2013
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Diameter 1 [mm]: 28
• Seal Diameter [mm]: 59
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Fabrication Number: NPZ-SK-009
• Manufacturer: NTY
• Name: NTY NPZ-SK-009

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 53
• Length [mm]: 105
• Diameter 1 [mm]: 98
• Thread Size: M16x1.5
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 98
• Manufacturer: BGA

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 53
• Diameter 1 [mm]: 98
• Length [mm]: 105
• Outer Diameter 1 [mm]: 59.6
• Outer Diameter 2 [mm]: 98
• Thread Size: M16x1,5
• Manufacturer: BGA

• Quantity: 1, 2
• Construction Year to: 09.2013, 10.2013
• Construction Year from: 10.2013
• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Number of Teeth: 33
• Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Manufacturer: VIKA

General Information: c.v.joint; inner; 33teeth; MT; 100MM; Inner tooth33mm

• Construction Year to: 10.2013
• Fabrication Number: NPW-VW-013
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Manual Transmission, Manual Transmission, Dual-Clutch Transmission, Automatic Transmission, 5-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission

• Fitting Position: Front Axle, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 100
• Joint Type: CV Joint
• Fabrication Number: NPZ-VW-019

• Fitting Position: Front Axle, Wheel Side
• Construction Year to: 10.2013
• Transmission Type: 6-Speed Manual Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Manufacturer: FAG

• Vehicle type: Caddy, Caddy Maxi
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Block Separation:
• Length [mm]: 105
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Technical Information Number: Original design
• Joint Type: 6-ball joint
• Manufacturer: GSP

for PR number: F6M, F0H, F4A, F4C, F4E, F4H, F4J, F4T, F4X, F5B, F5C, F5F, F5G, F5J, F5Z, F6L

• Fitting Position: Front Axle Right, Front Axle Left
• Number of Teeth: 28
• Diameter [mm]: 108
• Internal Toothing wheel side: 28
• General Information: c.v.joint; inner; 28teeth; 108MM; Inner tooth28mm
• Manufacturer: VIKA

• Construction Year from: 11.2013, 10.2013
• Vehicle type: Caddy Maxi
• Block Separation:
• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 28
• Seal Diameter [mm]: 59.5
• Length [mm]: 105.8
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle, Front Axle Right, transmission sided
• for OE number: 1K0407331
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• Technical Information Number: Non-Original design
• Manufacturer: GSP

• Thread Size: M20x1,5
• Bellows Material: Thermoplast
• Drive Shaft: without ABS ring
• Weight [kg]: 1.897
• Manufacturer: VAICO

Fitting Position: Front Axle Left, Front Axle Right, Wheel Side, Front Axle General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1, 2
• Construction Year to: 09.2013, 10.2013
• Construction Year from: 10.2013
• Fitting Position: Front Axle
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• General Information: c.v.joint; outer; Inner tooth27mm; outer tooth36mm
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 97.9
• Bellows Material: Rubber
• Manufacturer: METELLI
• Additional information: 15-1463MET
• Lisainfo: 15-1463MET

• Fitting Position: Wheel Side, Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Vehicle type: Caddy, Caddy Maxi
• Construction Year to: 10.2013
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Block Separation:
• Length [mm]: 106
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Technical Information Number: Original design, Groove Type Inner
• Manufacturer: GSP

• Fitting Position: Front Axle, transmission sided, Front Axle Right
• Construction Year to: 10.2013
• Transmission Type: 6-Speed Manual Transmission
• Block Separation:
• Construction Year from: 11.2013
• Internal Toothing differential side, conn. to conn. shaft: 28
• Outer Diameter [mm]: 108
• Bellows Material: Thermoplast
• Length [mm]: 32
• SVHC: No SVHC present!
• Name: LU 771072030
• Manufacturer: FAG

• Model Year from: 2011
• Fitting Position: transmission sided, Front Axle
• Weight [kg]: 2.228
• Internal Toothing differential side, conn. to transmission: 28
• Seal Diameter [mm]: 108
• Outer Diameter [mm]: 108
• Joint Type: Disc Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Thread Size: M16x1,5
• Seal Diameter [mm]: 59.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Version: 6 balls
• Length 2 [mm]: 106
• Fitting Position: outer
• Manufacturer: SNR /NTN-SNR/

• Construction Year from: 10.2013
• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Length [mm]: 105
• Outer Diameter [mm]: 100
• External Thread Size: M16 x 1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Weight [kg]: 2.6
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• New Part:
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• for PR number: F0A
• Block Separation:
• Supplementary Article/Supplementary Info: with attachment material
• Joint Type: CV Joint
• Thread Size: M16x1,5
• Bellows Material: Thermoplast
• Supplementary Article/Info 2: with bellow
• Lubrication: with grease lubrication
• Length [mm]: 106
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Weight [kg]: 2.483
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Right, Front Axle Left
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• General Information: c.v.joint; outer; Inner tooth27mm; outer tooth36mm
• Manufacturer: VIKA

• Vehicle type: Caddy
• for PR number: F0A
• Fitting Position: Wheel Side, Front Axle
• Weight [kg]: 2.509
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 97
• Joint Type: CV Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Vehicle Identification Number (VIN): [1M-3-109 001;], [1M-3-109001;], [8L-X-098488;]
• Fitting Position: Right, Left, Front Axle
• Joint Type: Disc Joint
• External Toothing differential side: 28
• Inner Diameter 2 [mm]: 108
• Length 2 [mm]: 32
• Name: SN IJK54.006
• Manufacturer: SNR

• Model Year from: 2011
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 2.729
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 100
• Joint Type: CV Joint
• Packaging length [cm]: 18
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Fitting Position: Left, Front Axle Left
• Transmission Type: Manual Transmission, automatically operated
• for PR number: F6, F5, F4
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.4
• Outer Diameter [mm]: 99.9
• Bellows Material: Rubber
• Manufacturer: METELLI

• Model Year from: 2011
• Fitting Position: Wheel Side, Front Axle
• Weight [kg]: 2.553
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 97
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Fitting Position: Wheel Side, Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Name: SK VKJA3028
• Manufacturer: SKF

• Seal Diameter [mm]: 59.5
• Thread Size: M16x1,5
• External Toothing wheel side: 36
• Length 2 [mm]: 105
• Internal Toothing wheel side: 27
• Fitting Position: outer
• Name: SN OJK54.035
• Manufacturer: SNR

• Construction Year to: 09.2013
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Special Purpose Vehicle: for special-purpose vehicles
• Block Separation:
• Construction Year from: 10.2013
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Machined: with groove in internal component
• Joint Diameter [mm]: 100
• Length [mm]: 105
• Thread Size: M16X1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Manufacturer: LOBRO

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Construction Year to: 10.2013
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Block Separation:
• Construction Year from: 11.2013
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Machined: without groove in internal component
• Joint Diameter [mm]: 98
• Length [mm]: 100
• Thread Size: M16x1.5x77
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Info 2: with screw
• Manufacturer: LOBRO

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Construction Year to: 10.2013
• Block Separation:
• Construction Year from: 11.2013
• Joint Type: Disc Joint
• Internal Toothing differential side, conn. to transmission: 28
• Machined: without groove in internal component
• Joint Diameter [mm]: 108
• Length [mm]: 32
• Supplementary Article/Info 2: with cap
• Bore Ø [mm]: 10.2
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 94
• New Part:
• Manufacturer: LOBRO

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Construction Year to: 10.2013
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Block Separation:
• Construction Year from: 11.2013
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Machined: without groove in internal component
• Joint Diameter [mm]: 98
• Length [mm]: 106
• Thread Size: M16x1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Manufacturer: LÖBRO

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Construction Year from: 11.2013, 10.2013
• Fitting Position: Front Axle Left, Wheel Side
• Block Separation:
• Special Purpose Vehicle: for special-purpose vehicles
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 28
• Seal Diameter [mm]: 60
• Machined: with groove in internal component
• Joint Diameter [mm]: 94
• Length [mm]: 105
• Thread Size: M16x1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Manufacturer: LOBRO

Technical Information: The technical specifications of GKN Automotive Countertrack® joints comply with the respective OE joint. Bending angle, torque and steering geometry are unchanged. Only with Countertrack® joints from GKN Automotive there are no structural changes. More information at www.gknautomotive.com.