Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Transmission Type: Automatic Transmission
- Opening Temperature [°C]: 75
- Heating/Cooling: for vehicles with transmission oil cooler
-
Housing Type: Synthetic Material Housing,
with housing -
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: CTM-
VW- 058 - Manufacturer: NTY
-
Name: NTY CTM-
VW- 058
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- General Information: coolant thermostat
- Manufacturer: BORSEHUNG
- Transmission Type: Automatic Transmission
- Opening Temperature [°C]: 75
-
Name: Termostaat,
Jahutusvedelik - Manufacturer: MEY
- Opening Temperature [°C]: 75
- Weight [kg]: 0.063
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Opening Temperature [°C]: 87
- Supplementary Article/Supplementary Info: with seal
-
Name: TERMOSTAAT,
JAHUTUSVEDELIK - Manufacturer: MAX
- Supplementary Article/Supplementary Info: with seal
- Opening Temperature [°C]: 87
- for OE number: 03L121111AE
- Manufacturer: KAMOKA
- Opening Temperature [°C]: 87
- Housing Type: with housing
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of connectors: 4
- Housing material: Plastic
- Weight [kg]: 0.38
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 20SKV147
- Manufacturer: ESEN SKV
- Opening Temperature [°C]: 87
-
Lisainfo: Thermostat,
coolant -
Additional information: Thermostat,
coolant
- Opening Temperature [°C]: 87
- Supplementary Article/Supplementary Info: with seal
- Packaging width [cm]: 12.2
- Packaging length [cm]: 16.2
- Packaging height [cm]: 19.2
- Net Weight [g]: 277
-
Name: TERMOSTAAT,
JAHUTUSVEDELIK - Manufacturer: MAH
- Lisainfo: TI 15 87 MAH
- Additional information: TI 15 87 MAH
- Engine Code: CFHF
- Housing Type: for integrated housing
- Opening Temperature [°C]: 87
- Supplementary Article/Supplementary Info: with seal
-
Name: TERMOSTAAT,
JAHUTUSVEDELIK - Manufacturer: EPS
- Opening Temperature [°C]: 87
- Material: Plastic
- Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: with thermostat
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Opening Temperature [°C]: 87
- Supplementary Article/Supplementary Info: with seal
-
Name: Termostaat,
Jahutusvedelik - Manufacturer: MEY
- Lisainfo: 1282280013
- Additional information: 1282280013
-
for model code: Caddy,
Caddy Maxi - Transmission Type: Automatic Transmission
- Cooling Hose: from water pipe to oil cooler
- Block Separation:
- Construction Year from: 10.2010
- Housing Type: with housing
- Opening Temperature [°C]: 75
- Manufacturer: GATES
- Opening Temperature [°C]: 87
- Manufacturer: MEAT&DORIA
- Opening Temperature [°C]: 87
- Supplementary Article/Supplementary Info: with seal
- Housing Type: Synthetic Material Housing
-
Name: TERMOSTAAT,
JAHUTUSVEDELIK - Manufacturer: VER
- Opening Temperature [°C]: 87
- Weight [kg]: 0.299
- Supplementary Article/Info 2: with seal ring
- Observe service information:
-
Name: TERMOSTAAT,
JAHUTUSVEDELIK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Opening Temperature [°C]: 87
- Weight [kg]: 0.299
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Name: SW 32 93 9226
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Trim Level: DTH
- for OE number: 03L121111AE
- Opening Temperature [°C]: 87
- Name: DA DT1094H
- Manufacturer: DAYCO
- Opening Temperature [°C]: 75
- Weight [kg]: 0.061
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Opening Temperature [°C]: 87
- Housing Type: with housing
- Alternatively:
- Supplementary Article/Supplementary Info: with seal
- Alternative Repair Kit: 350262
- Housing Colour: black
- Housing material: Plastic
- Manufacturer: ERA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks