• Fitting Position: Rear Axle
• Lisainfo: PAKENDIS 10 tk, kuvatakse 1tk hind , VW/Audi
• Additional information: PAKENDIS 10 tk, kuvatakse 1tk hind , VW/Audi

• Length [mm]: 135
• Fitting Position: Rear Axle
• Lisainfo: Brake hose, rear
• Additional information: Brake hose, rear

• Fitting Position: Front Axle
• Length [mm]: 435
• Manufacturer: JP GROUP
• Lisainfo: Brake hose, front
• Additional information: Brake hose, front

• Fitting Position: Rear
• Length [mm]: 25
• Width [mm]: 24
• Material: Metal
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front
• Material: Metal
• for OE number: 1H0611715
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Quantity per packing unit: 10
• Material: Spring Steel
• for OE number: 191 611 715
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 4
• Quantity per packing unit: 10
• Fitting Position: Front Axle, Rear Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle, Front Axle
• Block Separation:
• Quantity per packing unit: 10
• Material: Spring Steel
• for OE number: 1H0 611 715
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.007
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: FEB
• Additional information: FE19522
• Lisainfo: FE19522

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Material: Metal
• Weight [kg]: 0.008
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 4
• Quantity per packing unit: 10
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Braking System: for vehicles with disc brakes on the rear axle
• Fitting Position: Rear Axle
• Length [mm]: 160
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Length [mm]: 135
• Internal Thread [mm]: M10
• General Information: brake hose; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Length [mm]: 155
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Length [mm]: 160
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Length [mm]: 160
• Net weight [kg]: 0.07
• Name: PIDURIVOOLIK
• Manufacturer: NK
• Lisainfo: .
• Additional information: .

• Fitting Position: Rear Axle Left, inner
• Length [mm]: 137
• Thread Size 1: M10x1
• Thread Size 2: M10x1
• Thread Type: with internal thread
• Manufacturer: QUICK BRAKE

• Fitting Position: Rear Axle, inner
• Length [mm]: 162
• Thread Size 1: INN M10x1.0
• Thread Size 2: INN M10x1.0
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Length [mm]: 435
• External Thread [mm]: M10
• General Information: brake hose; front
• Manufacturer: VIKA

• Construction Year from: 11.1991
• Fitting Position: Front Axle, Left, Right
• Length [mm]: 485
• Internal Thread [mm]: M10x1
• Weight [kg]: 0.12
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: at brake caliper, Rear Axle
• Length [mm]: 185
• Thread Size 1: F10X1
• Thread Size 2: M10X1
• Manufacturer: BREMBO
• Name: BR T 85 017

• Fitting Position: Rear Axle
• Thread Size 1: F10x1
• Thread Size 2: F10x1
• Overall Length [mm]: 165
• Name: PIDURIVOOLIK
• Manufacturer: TRI
• Lisainfo: VW GOLF, VENTO
• Additional information: VW GOLF, VENTO

• Fitting Position: Front Axle
• Length [mm]: 435
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Left, Front Axle Right
• External Thread [mm]: M 10 x 1,0
• Internal Thread [mm]: M 10 x 1,0
• Length [mm]: 442
• Observe system fill quantity:
• Manufacturer: TOPRAN

Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Length [mm]: 482
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Required quantity: 2
• Quantity per packing unit: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 160
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle, at brake caliper
• Thread Size 1: F10x1
• Thread Size 2: M10x1
• Overall Length [mm]: 192
• Name: PIDURIVOOLIK
• Manufacturer: TRI
• Lisainfo: AUDI, SEAT, VW
• Additional information: AUDI, SEAT, VW

• Fitting Position: Rear Axle, inner, Left, Right
• Length [mm]: 160
• Thread Size 1: F10X1
• Thread Size 2: F10X1
• Manufacturer: BREMBO
• Name: BR T 85 021

• Fitting Position: Rear Axle
• Length [mm]: 135
• Internal Thread [mm]: 2 x M10x1
• Technical Information Number: AH6006
• Name: HE 8AH355460061
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• for OE number: 1H0 611 775
• Thread Size 1: M10x1 Int SF
• Thread Size 2: M10x1 Int SF
• Length [mm]: 140
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake hose
• Quality class: PJ

Lisainfo: "Tootja: DELPHI
GOLF III VARIANT (1H
(kvaliteediklass: PJ)" Additional information: "Tootja: DELPHI
GOLF III VARIANT (1H
(kvaliteediklass: PJ)"

• Quantity per packing unit: 2
• Fitting Position: at brake caliper, Front Axle
• Internal Thread 1 [mm]: M 10x1
• Length [mm]: 285
• Internal Thread 2 [mm]: M 10x1
• Internal Thread [mm]: M10x1
• Spanner Size: 14/17
• Weight [kg]: 0.095
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, at brake caliper
• for OE number: 481 611 775
• Thread Size 1: M10x1 Int SF
• Thread Size 2: M10x1
• Length [mm]: 161
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake hose
• Quality class: PJ

Additional information: "Tootja: DELPHI
GOLF III (1H1), 08.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
GOLF III (1H1), 08.9
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Length [mm]: 160
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MEY

• Length [mm]: 162
• Internal Thread Size: M10 x 1
• Spanner Size: 17
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.07
• Name: PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Braking System: for vehicles with disc brakes on the rear axle
• Fitting Position: Rear Axle, both sides
• Quantity per packing unit: 2
• Length [mm]: 185
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Required quantity: 2
• Length [mm]: 435
• Name: PIDURIVOOLIK
• Manufacturer: FTE

• Fitting Position: Front Axle
• Length [mm]: 485
• Net weight [kg]: 0.12
• Name: PIDURIVOOLIK
• Manufacturer: NK

• Vehicle Identification Number (VIN) from: 1H-SW560001
• for PR number: 1LN
• Length [mm]: 480
• Internal Thread [mm]: M10 x 1
• Fitting Position: Front Axle
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Brake Type: Drum Brake
• Fitting Position: Front Axle
• Length [mm]: 165
• Name: COB 19018657
• Manufacturer: CORTECO

• Construction Year from: 11.1991
• Fitting Position: Rear Axle, inner
• Length [mm]: 135
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Front Axle Left
• Length [mm]: 440
• Thread Size 1: M10x1
• Thread Type: with internal thread, with external thread
• Thread Size 2: M10x1
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Length [mm]: 485
• Thread Size 1: OUT M10x1.0
• Thread Size 2: INN M10x1.0
• Weight [kg]: 0.12
• Manufacturer: A.B.S.

• Length [mm]: 482
• Internal Thread Size: M10 x 1
• External Thread Size: M10 x 1
• Spanner Size: 14
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.103
• Name: PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Thread Size 1: F10x1
• Thread Size 2: M10x1
• Overall Length [mm]: 482
• Name: PIDURIVOOLIK
• Manufacturer: TRI
• Lisainfo: VW GOLF/VENTO, SEAT IBIZA
• Additional information: VW GOLF/VENTO, SEAT IBIZA

• Fitting Position: Front Axle Right, Front Axle Left
• Length [mm]: 441
• Thread Size 1: M10 x 1
• Thread Size 2: F10 x 1
• Manufacturer: METZGER

• Fitting Position: Left, Right, Front Axle
• Length [mm]: 490
• Thread Size 1: F10X1
• Thread Size 2: M10X1
• Name: BR T 85 020
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Length [mm]: 435
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MEY

• Fitting Position: Front Axle
• for OE number: 6K0 611 701
• Thread Size 1: M10x1 Int SF
• Thread Size 2: M10x1
• Length [mm]: 485
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake hose
• Quality class: PJ

Additional information: "Tootja: DELPHI
CADDY II PICK-UP (9U
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
CADDY II PICK-UP (9U
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Length [mm]: 484
• Manufacturer: CORTECO
• Name: COB 19018523

• Fitting Position: Front Axle, Left, Right
• Length [mm]: 485
• Thread Size 1: M10x1
• Thread Type: External Thread, Internal Thread
• Thread Size 2: M10x1
• Name: PIDURIVOOLIK
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 11.1991
• Fitting Position: Front Axle
• Length [mm]: 435
• External Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Name: PIDURIVOOLIK
• Manufacturer: BOS

• Fitting Position: Rear Axle, Left, Right
• Length [mm]: 160
• Thread Size 1: M10x1
• Thread Size 2: M10x1
• Thread Type: Internal Thread
• Manufacturer: TRW
• Quality class: Q
• Name: Brake hose

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) from: 1H-SW560 001
• for PR number: 1LN
• Length [mm]: 465
• Inner Diameter [mm]: 12
• Internal Thread Size: M10 x 1
• Spanner Size: 14
• Supplementary Article/Info 2: with banjo bolt
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.14
• Name: PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 11.1991
• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 442
• External Thread [mm]: M10x1
• Internal Thread [mm]: M10x1
• MAPP code available:
• Spanner size 1 [mm]: 14
• Name: Pidurivoolik
• Manufacturer: ATE

• Construction Year from: 11.1991
• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 135
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• MAPP code available:
• Spanner size 1 [mm]: 17
• Name: Pidurivoolik
• Manufacturer: ATE

• Fitting Position: Rear Axle Left, outer
• Braking System: for vehicles with disc brakes on the rear axle
• Length [mm]: 155
• Thread Size 1: M10x1
• Thread Type: with internal thread, with external thread
• Thread Size 2: M10x1