Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Manufacturer Restriction: BOSCH
- Resistor [kOhm]: 1
- Manufacturer: JP GROUP
-
Lisainfo: PAKENDIS 10 tk,
kuvatakse 1tk hind -
Additional information: PAKENDIS 10 tk,
kuvatakse 1tk hind
- Number of Cylinders: 4
- Manufacturer Restriction: Bosch
- Connector type: Pin
- Manufacturer: JP GROUP
- Lisainfo: Distributor cap
- Additional information: Distributor cap
- Construction Year to: 07.1994
-
Material: FPM
(fluoride rubber) - Outer Diameter [mm]: 8
- Inner Diameter [mm]: 6
- Thickness [mm]: 1
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) from: 1H-
N- 000 001 - Manufacturer Restriction: BOSCH
- Resistor [kOhm]: 1
- Length [mm]: 37
- Height [mm]: 22
- Support plate diameter [mm]: 10.2
- Manufacturer: DELLO AUTOMEGA
- Manufacturer Restriction: BOSCH
-
for OE number: 90008612,
052 905 225C, 12 12 222 - Manufacturer: TOPRAN
- Lisainfo: 101 018 HP
- Additional information: 101 018 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 11.1991
- Colour: red
- Weight [kg]: 0.023
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Material: FPM
(fluoride rubber) - Manufacturer Restriction: BOSCH
- Inner Diameter [mm]: 42
- Thickness [mm]: 4.5
- Outer Diameter [mm]: 51
-
Name: TIHEND,
STEJAGAJA - Manufacturer: HAN
- Lisainfo: 109 744 HP
- Additional information: 109 744 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer Restriction: System BOSCH
- Interference suppressed:
-
Resistor [Ohm]: 1,
000 - Name: STEJAGAJA
- Manufacturer: BRM
- Lisainfo: 7001 BREMI
- Additional information: 7001 BREMI
- Engine Code: AEX
- Manufacturer Restriction: Marelli
- Name: STEJAGAJA
- Manufacturer: MAX
-
Manufacturer Restriction: SYSTEMBOSCH,
System BOSCH -
Engine Code: AEX,
ABD - Interference suppressed:
- Name: STEJAGAJA
- Manufacturer: MAX
-
Lisainfo: 31-
0207 -
Additional information: 31-
0207
- Manufacturer Restriction: Marelli
- Manufacturer: JP GROUP
- Lisainfo: Distributor cap
- Additional information: Distributor cap
- Engine Code: AEX
- Manufacturer: DELLO AUTOMEGA
- for OE number: 51905207
- Manufacturer: DELLO AUTOMEGA
- Manufacturer Restriction: BOSCH
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: AEX
-
Manufacturer Restriction: Marelli,
MARELLI - Name: STEJAGAJA KAAN
- Manufacturer: MAX
- Construction Year to: 07.1994
- Manufacturer Restriction: BOSCH
- Supplementary Article/Info 2: with cover
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer Restriction: System BOSCH
-
Resistor [Ohm]: 1,
000 - Material: Polyester
- Mounting Type: Plugged
- Support plate diameter [mm]: 10.2
- Name: STEJAGAJA
- Manufacturer: BERU
- Lisainfo: BEREVL134
- Additional information: BEREVL134
-
Manufacturer Restriction: BOSCH /
MARELLI - Material: Polyester
- Support plate diameter [mm]: 7.9
- Distributor/ Rotor: Interference Suppression 1 kOhm
- Name: STEJAGAJA
- Manufacturer: BERU
- Engine Code: AEX
- Manufacturer Restriction: Marelli
-
Resistance Rotor [Ohm]: 1,
000 - Name: STEJAGAJA
- Manufacturer: EPS
- Engine Code: ABD
- Manufacturer Restriction: Bosch
-
Resistance Rotor [Ohm]: 1,
000 - Name: STEJAGAJA
- Manufacturer: EPS
- Engine Code: ABD
- Construction Year from: 11.1991
- Construction Year to: 06.1994
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year from: 07.1994
- Name: STEJAGAJA KAAN
- Manufacturer: MAX
-
Lisainfo: 31-
0109 -
Additional information: 31-
0109
- Construction Year from: 07.1994
- Construction Year to: 06.1995
- Engine Code: ABD
- Weight [kg]: 0.149
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ABD
- Construction Year from: 11.1991
- Construction Year to: 06.1994
- Manufacturer Restriction: BOSCH
- Name: STEJAGAJA KAAN
- Manufacturer: MAX
- Manufacturer Restriction: System BOSCH
- Mounting Type: Latching Connection
- Name: STEJAGAJA KAAN
- Manufacturer: BRM
- Engine Code: AEX
-
Manufacturer Restriction: BOSCH /
MARELLI - Material: Polyester
- Support plate diameter [mm]: 7.9
- Distributor/ Rotor: Interference Suppression 1 kOhm
- Weight [kg]: 0.02
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ABD\AEX
- Manufacturer Restriction: SYSTEM BOSCH
- Colour: black
- Weight [kg]: 0.031
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 055 905 207
- Manufacturer Restriction: BOSCH
- Weight [kg]: 0.094
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ABD
- Construction Year to: 06.1994
- Manufacturer: VEMO GERMANY
- Manufacturer Restriction: System BOSCH
- Material: Polyester
- Surface: Painted
-
Distributor/ Rotor: Connector Type,
saw teeth - Version: without shielding
- Name: STEJAGAJA KAAN
- Manufacturer: BERU
- Engine Code: ABD
- Manufacturer Restriction: Bosch
- Construction Year from: 08.1994
- Name: STEJAGAJA KAAN
- Manufacturer: EPS
- Construction Year from: 11.1991
- Resistor [kOhm]: 1
- Name: STEJAGAJA
- Manufacturer: BOS
- Engine Code: AEX
- Manufacturer Restriction: Marelli
- Name: STEJAGAJA KAAN
- Manufacturer: EPS
- Alternatively:
- Manufacturer Restriction: System BOSCH
- Material: Polyester
- Mounting Type: Clipped
- Surface: inner painted
-
Distributor/ Rotor: Covered,
Connector Type, saw teeth - Name: STEJAGAJA KAAN
- Manufacturer: BERU
- Lisainfo: BERVK407S
- Additional information: BERVK407S
- Engine Code: ABD
- Manufacturer Restriction: Bosch
- Construction Year to: 07.1994
- Name: EP 1.306.266
- Manufacturer: EPS
- Engine Code: AEX
- Weight [kg]: 0.091
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer Restriction: MARELLI
- Connector type: Saegezahn
- Material: Polyester
- Manufacturer: BERU
- Construction Year from: 07.1994
- Number of Cylinders: 4
- Name: STEJAGAJA KAAN
- Manufacturer: BOS
- Number of inlets/outlets: 5
-
Fabrication Number: EAZ-
VW- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: ABD
- Construction Year from: 11.1991
- Construction Year to: 06.1994
- Manufacturer: JP GROUP
- Lisainfo: Distributor
- Additional information: Distributor
- Engine Code: AEX
- Construction Year from: 07.1995
- Name: STEJAGAJA
- Manufacturer: MAX
- Engine Code: AEX
- Construction Year from: 07.1995
- Manufacturer Restriction: BOSCH
- Manufacturer: JP GROUP
- Lisainfo: Distributor
- Additional information: Distributor
- Engine Code: ABD
- Construction Year from: 11.1991
- Construction Year to: 06.1994
- Number of Cylinders: 4
- Name: STEJAGAJA KAAN
- Manufacturer: BOS
- General Information: distributor
- Manufacturer: VIKA
-
Engine Code: ABD,
AEX - Construction Year from: 07.1994
- Construction Year to: 07.1995
- Block Separation:
- Manufacturer Restriction: Bosch
- Manufacturer: METZGER
- Engine Code: AEX
- Construction Year from: 07.1995
- Service exchange part:
- Manufacturer: BOSCH
Price of the deposit will be added in the sum of 9.26€
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks