• Vehicle Identification Number (VIN) from: 1H-N-000 001
• Fitting Position: Front Axle Left
• Sensor Type: Inductive Sensor
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, front, left
• Additional information: ABS sensor, front, left

• Vehicle Identification Number (VIN) from: 1H-N-000 001
• Fitting Position: Front Axle Right
• Sensor Type: Inductive Sensor
• Lisainfo: ABS sensor, front, right
• Additional information: ABS sensor, front, right

Lisainfo: (AM)

• Fitting Position: Front Axle Left
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Right
• Fabrication Number: HCA-VW-005
• paired article number: HCA-VW-004
• Manufacturer: NTY
• Name: NTY HCA-VW-005

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-VW-004
• paired article number: HCA-VW-005
• Manufacturer: NTY
• Name: NTY HCA-VW-004

• Fitting Position: Rear Axle
• Width [mm]: 21
• Outer Diameter [mm]: 73, 79
• Number of Teeth: 43
• Inner Diameter [mm]: 61
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 11.1991
• Fitting Position: Front Axle Left
• Sensor Type: Passive sensor
• Overall Length [mm]: 68
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 11.1991
• Fitting Position: Front Axle Right
• Sensor Type: Passive sensor
• Overall Length [mm]: 68
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle Right
• Sensor Type: Inductive Sensor
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Left
• Sensor Type: Inductive Sensor
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 11.1991
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN FILTRY

• Construction Year from: 11.1991
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle, Front Axle Right
• Sensor Type: Passive sensor
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle, Front Axle Left
• Sensor Type: Passive sensor
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Rear Axle both sides
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right
• Resistor [Ohm]: 1,100
• for OE number: 1J0927804
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS000

• Fitting Position: Front Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Length [mm]: 68
• Braking/Drive Dynamics: for vehicles with ABS
• paired article number: 109 752
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left
• Resistor [Ohm]: 1,100
• for OE number: 1J0927803
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS001

• Fitting Position: Rear
• General Information: Sensor ring, ABS; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle Left
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Length [mm]: 69
• Braking/Drive Dynamics: for vehicles with ABS
• paired article number: 109 753
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Connector Shape: oval
• Sensor Type: Inductive Sensor
• for OE number: 1J0 927 804
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle Left
• Weight [kg]: 0.4
• Required quantity: 1
• Number of connectors: 2
• General Information: ABS speed sensor; front left
• Manufacturer: VIKA

• Fitting Position: Front Axle both sides
• Diameter ABS Sensor Ring Fitting [mm]: 80.02
• Name: ANDUR,ABS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Voltage [V]: 12
• Weight [kg]: 0.05
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV006
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,125
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 79.5
• Supplementary Article/Info 2: for wheel bearing/wheel hub
• Width [mm]: 21
• Weight [kg]: 0.039
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 02.1995, 07.1995
• Block Separation:
• Construction Year to: 07.1995
• Vehicle Identification Number (VIN) from: 1H..SB088 705, 1H..SW352 190, 1H..SW385 335
• Engine Code: ABD, AEX
• Fitting Position: Rear Axle
• Sensor Type: Passive sensor
• Overall Length [mm]: 1,135
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Length [mm]: 68
• Sensor Type: Passive sensor
• paired article number: FT80429
• Fitting Position: Front Axle Right
• Manufacturer: FAST

• Length [mm]: 68
• Sensor Type: Passive sensor
• paired article number: FT80428
• Fitting Position: Front Axle Left
• Manufacturer: FAST

• Fitting Position: Front Axle Left
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Front Axle Right
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Front
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Voltage [V]: 12
• Weight [kg]: 0.04
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV007

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 1,043
• Fabrication Number: HCA-VW-006
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Connector Shape: oval
• Sensor Type: Inductive Sensor
• for OE number: 1J0 927 803
• Manufacturer: MEAT&DORIA

• Fitting Position: Front
• General Information: Sensor ring, ABS; front
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 1H-S-088705
• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Inductive Sensor
• Lisainfo: ABS sensor, rear, left/right
• Additional information: ABS sensor, rear, left/right

• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: without cable
• Colour: black
• Name: CZUJNIK ABS VW GOLF 91-
• Manufacturer: BRM

• Required quantity: 1
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: without cable
• Colour: black
• Name: CZUJNIK ABS VW P. GOLF III, IV LE/PR
• Manufacturer: BRM

• Fitting Position: Front Axle Left
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Required quantity: 1
• Resistor [Ohm]: 1,100
• Colour: black
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 2
• Number of connectors: 2
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Weight [kg]: 0.058
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Sensor Type: Inductive Sensor
• Manufacturer: FAE

• Number of pins: 2
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Sensor Type: Inductive Sensor
• Manufacturer: FAE

• Fitting Position: Front Axle Left
• Overall Length [mm]: 68
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• paired article number: 30000
• Weight [kg]: 0.04
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Overall Length [mm]: 68
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• paired article number: 30001
• Weight [kg]: 0.04
• Manufacturer: A.B.S.

• Required quantity: 2
• Fitting Position: Rear Axle both sides
• Supplementary Article/Info 2: Magnetic
• Thickness [mm]: 21
• Inner Diameter [mm]: 61.2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 61.2
• Width [mm]: 21
• Outer Diameter [mm]: 73, 78.75
• Number of Teeth, ABS ring: 43
• Manufacturer: TRISCAN
• Lisainfo: VAG
• Additional information: VAG

• Fitting Position: Front Axle Right
• Weight [kg]: 0.4
• Required quantity: 1
• Number of connectors: 2
• General Information: ABS speed sensor; front right
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Cable Length [mm]: 1,040
• Resistor [Ohm]: 1,100
• for OE number: 1H0927807D
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN) from: 1H-SP352 190, 1H-SB088 707, 1H-SW385 335
• Fitting Position: Rear Axle
• Sensor Type: Inductive Sensor
• Manufacturer: DELLO AUTOMEGA

• Required quantity: 1
• Fitting Position: Front Axle Left
• Number of pins: 2
• paired article number: 50945
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 560
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Vehicle Identification Number (VIN) from: 1H-SP352190, 1H-SB088707, 1H-SW385335
• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,140
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN
• Lisainfo: 109 754 HP
• Additional information: 109 754 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right
• Length [mm]: 68
• Sensor Type: Passive sensor
• Supplementary Article/Supplementary Info: with accessories
• paired article number: TX 51-50
• Weight [kg]: 0.04
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle Left
• Fitting Depth [mm]: 27.7
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle Right
• Fitting Depth [mm]: 27.7
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Vehicle Identification Number (VIN) from: 1H-S-088705
• Fitting Position: Rear Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,085
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 1H-N-000 001
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Fitting Position: Front Axle Right
• paired article number: 100 927 0003
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Vehicle Identification Number (VIN) from: 1H-N-000 001
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Fitting Position: Front Axle Left
• paired article number: 100 927 0004
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,166
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year from: 02.1995
• Fitting Position: Rear
• Length [mm]: 1,050
• Number of pins: 2
• Plug Type: Female
• Voltage [V]: 12
• Weight [kg]: 0.13
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV008

• Fitting Position: Front Axle Right
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Fitting Position: Front Axle Left
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO
• Name: HU 131400

• paired article number: 30 92 1582
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Weight [kg]: 0.4
• Manufacturer: SWAG
• Name: SW 30 92 1584

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-VW-007
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 1H-S-088705
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,085
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Front Axle Right
• Sensor Type: Inductive Sensor
• Manufacturer: METZGER

• Fitting Position: Front Axle Left
• General Information: ABS speed sensor; left front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle both sides
• Number of Teeth: 43
• Outer Diameter [mm]: 133
• Width [mm]: 24
• Inner Diameter [mm]: 80
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right
• General Information: ABS speed sensor; right front
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Weight [kg]: 0.1
• Required quantity: 2
• Number of connectors: 2
• General Information: ABS speed sensor; rear
• Manufacturer: VIKA

• Engine Code: ABD
• Construction Year from: 03.1995
• Construction Year to: 07.1995
• Vehicle Identification Number (VIN) from: 1H..SW385 335, 1H..SW352 190, 1H..SB088 705
• Fitting Position: Rear Axle Left, Rear Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,135
• Height [mm]: 35
• Required quantity: 2
• Resistor [Ohm]: 1,120
• Colour: black
• Cable Length [mm]: 1,060
• Sensor Type: Inductive Sensor
• Weight [kg]: 0.088
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 11.1991
• Vehicle Identification Number (VIN) to: 1H-S-088704
• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Inductive Sensor
• Manufacturer: JP-GROUP
• Lisainfo: ABS sensor, rear, left/right
• Additional information: ABS sensor, rear, left/right

• Inner Diameter [mm]: 61.2
• Outer Diameter [mm]: 78
• Material: Steel
• Number of Teeth, ABS ring: 43
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.041
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 21582
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Weight [kg]: 0.4
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 21584
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Weight [kg]: 0.4
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1H-S-088705
• Number of pins: 2
• Cable Length [mm]: 1,040
• Overall Length [mm]: 1,135
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 35
• for OE number: 1H0 927 807 D
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: MEAT&DORIA

• Vehicle Identification Number (VIN) from: 1H-SB088 705, 1H-SP352190, 1H-SW385335
• Block Separation:
• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 1,135
• Sensor Type: Passive sensor
• Supplementary Article/Supplementary Info: with accessories
• Weight [kg]: 0.096
• Manufacturer: TOMEX BRAKES

• paired article number: 30 92 1584
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Weight [kg]: 0.4
• Manufacturer: SWAG
• Name: SW 30 92 1582

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Required quantity: 1
• Resistor [Ohm]: 1,100
• Colour: black
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 2
• Number of connectors: 2
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Weight [kg]: 0.058
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 01.1995
• Fitting Position: Rear
• Length [mm]: 945
• Number of pins: 2
• Plug Type: Female
• Connector Shape: round
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV046