Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 61
- Outer Diameter [mm]: 79.5
-
Supplementary Article/Info 2: for wheel bearing/
wheel hub - Width [mm]: 21
- Weight [kg]: 0.039
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Article/Info 2: with wheel hub
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: KLP-
VW- 000 - Manufacturer: NTY
-
Name: NTY KLP-
VW- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Vehicle Identification Number (VIN) to: 31-
M- 367 757 - Fitting Position: Front Axle
- Outer Diameter [mm]: 68
- Inner Diameter [mm]: 39
- Width [mm]: 37
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing,
front -
Additional information: Wheel bearing,
front
- Fitting Position: Front Axle
- for OE number: 1H0498625
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Quality class: PJ
- Name: Wheel bearing kit
- Fitting Position: Front Axle
-
for OE number: 357498625B,
191498625A, 357498625 - Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Height [mm]: 37
-
Lisainfo: Wheel bearing kit,
for one front wheel, 72 mm -
Additional information: Wheel bearing kit,
for one front wheel, 72 mm
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Quality class: PJ
- Name: Wheel bearing kit
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Vehicle Identification Number (VIN) from: 31-
M- 367 758 - Fitting Position: Front Axle
- Height [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Weight [kg]: 0.565
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 72
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fitting Position: Front Axle,
Left, Right - Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72.1
- Manufacturer: IJS GROUP
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.35
-
Supplementary Article/Info 2: with retaining ring,
with screw -
Supplementary Article/Supplementary Info: with axle nut,
with retaining rings - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 72
- Width [mm]: 37
- Weight [kg]: 0.64
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Weight [g]: 670
- Manufacturer: METALCAUCHO
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
-
Supplementary Article/Info 2: with retaining ring,
with screw, with nut - Manufacturer: OPTIMAL
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
-
Supplementary Article/Info 2: with retaining ring,
with nut - Manufacturer: OPTIMAL
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.551
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Supplementary Article/Info 2: with wheel hub
- Packaging length [cm]: 7.2
- Packaging width [cm]: 7.2
- Packaging height [cm]: 3.7
- Manufacturer: FEBEST
-
Fitting Position: Rear Axle,
Front Axle Left, Front Axle Right - Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Weight [kg]: 0.839
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 40
- Outer Diameter 1 [mm]: 72
- Weight [kg]: 0.72
- Width 1 [mm]: 37
- Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Manufacturer: OPTIMAL
- Outer Diameter [mm]: 70
- Fitting Position: Front Axle
- Weight [kg]: 0.716
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 40
- Outer Diameter 1 [mm]: 72
- Weight [kg]: 0.79
- Width 1 [mm]: 37
- Manufacturer: A.B.S.
-
Fitting Position: Front Axle Left,
Front Axle Right - Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 72
- Inner Diameter 1 [mm]: 40
- Manufacturer: GSP
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 72
- Inner Diameter 1 [mm]: 40
- Manufacturer: GSP
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.69
- Supplementary Article/Supplementary Info: with attachment material
- for OE number: 1H0 498 625
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Trim Level: FRRE LR+RE
- Number of bores: 40
- Width [mm]: 37
- Diameter 2 [mm]: 1
- Name: DA KWD1037
- Manufacturer: DAYCO
- Fitting Position: Front
- Weight [kg]: 1.7
- Bolt Hole Circle Ø 1 [mm]: 100
- Warranty: 4 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
Fitting Position: Right,
Left, Front Axle - Width 1 [mm]: 37
- Inner Diameter 1 [mm]: 40
- Outer Diameter 1 [mm]: 72
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN R154.34
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72.1
- Width [mm]: 37
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Rear Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Manufacturer: SKF
- Name: SK VKBA1358
- Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72.1
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72.1
- Width [mm]: 37
- SVHC: No SVHC present!
- Manufacturer: FAG