• Number of pins: 2
• Colour: blue
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 2
• Housing Colour: black
• Connector Shape: angular
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 4
• Switch Point [°C]: 100, 95
• Colour: black, blue
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for cooling system, 100/95 C
• Additional information: Thermo switch for cooling system, 100/95 C

• Vehicle Identification Number (VIN) to: 3A-V-015 000
• Number of pins: 4
• Switch Point [°C]: 88, 93
• Colour: blue, white
• Lisainfo: Thermo switch for cooling system, 93/88 C
• Additional information: Thermo switch for cooling system, 93/88 C

• General Information: temperature sensor
• Manufacturer: VIKA

• Number of pins: 2
• Colour: blue
• Diameter [mm]: 20
• Manufacturer: DELLO AUTOMEGA

• Housing Colour: blue
• for OE number: 025906041A
• Manufacturer: KAMOKA

• Thread Size: M10x1,0
• Colour: black
• Number of connectors: 1
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 25
• Temperature range to [°C]: 125
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Temperature range to [°C]: 125
• Length [mm]: 25
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Name: SW 99 90 1939
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Colour: yellow
• Colour Coding: blue
• Weight [kg]: 0.041
• Required quantity: 1
• Outer Diameter [mm]: 20
• Number of connectors: 4
• General Information: temperature sensor; yellow
• Manufacturer: VIKA

• Colour: blue
• Colour Coding: blue
• Weight [kg]: 0.041
• Required quantity: 1
• Outer Diameter [mm]: 20
• Number of connectors: 4
• General Information: temperature sensor; blue
• Manufacturer: VIKA

• Colour Coding: green
• Weight [kg]: 0.02
• Required quantity: 1
• Number of connectors: 2
• General Information: temperature sensor
• Manufacturer: VIKA

• Connector Shape: round
• Material: Brass
• Number of pins: 1
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 14 mm
• Thread Size: M10x1,0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: ABV
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: white
• Name: ANDUR,OLITEMPERATUUR
• Manufacturer: EPS

• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 4
• Manufacturer: DELLO AUTOMEGA

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• for OE number: 251919501A
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Diameter [mm]: 20
• Number of pins: 2
• Manufacturer: ERA

• Temperature range to [°C]: 125
• External Thread [mm]: M10 x 1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Colour: black
• Number of pins: 1
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: SW 30 93 4762
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: rectangular
• Material: Brass
• Number of pins: 2
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 20 mm
• Thread Size: not have

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Construction Year from: 02.1994
• Thread Size: 20 mm
• Manufacturer: VERNET

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Temperature range from [°C]: 89
• Temperature range to [°C]: 97
• for OE number: 1669990
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 3A-V-015 000
• Sensor Type: NTC Sensor
• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Length [mm]: 37
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with seal
• Colour Coding: blue
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M20
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Engine Code: ABV
• Switch Point [°C]: 95
• Thread Size: 20 mm
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Thread Size: M10x1.0
• Manufacturer: VERNET

• Engine Code: ABV
• Manufacturer: EPS

• Engine Code: ABV
• Thread Size: M10 x 1
• Spanner Size: 13
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Weight [kg]: 0.02
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Temperature range to [°C]: 95
• Manufacturer: ERA

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Housing Colour: black
• Number of pins: 4
• Colour Coding: black, blue
• Switch point from [°C]: 100
• Switch point to [°C]: 95
• Weight [kg]: 0.028
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch Point [°C]: 140
• Outer Diameter [mm]: 20
• Weight [kg]: 0.023
• Number of connectors: 4
• Colour: black
• Colour Coding: yellow
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Plug Type ID: 4 polig
• Thread Size: M20x1,5
• General Information: temperature sensor
• Manufacturer: VIKA

• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 2
• Name: ANDUR,KIIRUS
• Manufacturer: MAX
• Lisainfo: 095927321C/MG
• Additional information: 095927321C/MG

• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 1097757
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Vehicle Identification Number (VIN) to: 3A-V-015 000
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without seal ring
• Colour: blue, white
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of pins: 2
• Housing Colour: black
• Heating/Cooling: for aircon control
• Manufacturer: FAE

• Voltage [V]: 12
• Number of pins: 3
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Number of pins: 3
• Connector Shape: rectangular
• Cable Length [mm]: 370
• Sensor Type: Inductive Sensor
• Manufacturer: MEAT&DORIA

• General Information: interior temperature sensor
• Manufacturer: BORSEHUNG

• General Information: impluse sender
• Manufacturer: VIKA

• Engine Code: ABV
• Cable Length [mm]: 370
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Cable insulation material: Silicone
• Cable Length [mm]: 500
• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Socket Width [mm]: 2.8
• Supplementary Article/Supplementary Info: with socket housing, with seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, numbrivalgustus
• Manufacturer: HBE

• Number of pins: 4
• Housing Colour: blue
• Manufacturer: FAE

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: BMW, Volvo, VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Number of pins: 4
• Weight [kg]: 0.031
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 3A-V-015 000
• Sensor Type: NTC Sensor
• Colour: blue, black
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Cable Length [mm]: 361
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11020

• Length [mm]: 43
• Outer Diameter [mm]: 25.5
• Number of connectors: 4
• Colour Coding: blue
• Weight [kg]: 0.025
• Name: SW 30 93 7498
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 4-Speed Automatic Transmission
• Number of connectors: 2
• Weight [kg]: 0.018
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 43
• Outer Diameter [mm]: 25.5
• Number of connectors: 4
• Colour Coding: blue
• Weight [kg]: 0.025
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ABV
• Warn Temperature [°C]: 100
• Name: EP 1.830.536
• Manufacturer: EPS

• Construction Year from: 07.1994
• Engine Code: ABV
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Weight [kg]: 0.07
• Manufacturer: VALEO
• Name: VA 254061

• Engine Code: ABV
• Vehicle Identification Number (VIN) to: 3A-W-300 000
• Number of pins: 3
• Manufacturer: FAE

• Engine Code: ABV
• Length [mm]: 370
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Vehicle Identification Number (VIN) from: 3A-TA000 001, 3A-TB000 001, 3A-TE000 001
• Number of connectors: 7
• Weight [kg]: 0.12
• Name: LšLITI,KŽIK
• Manufacturer: FEB

Transmission Type: 4-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 07.1994
• Engine Code: ABV
• Cable Length [mm]: 340
• Number of connectors: 3
• Length [mm]: 390
• Supplementary Article/Info 2: for crankshaft, with cable
• Resistor [Ohm]: 900
• Operating Mode: Electric
• Sensor Type: Inductive Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 25
• Connector Shape: rectangular
• Weight [kg]: 0.107
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 4-Speed Automatic Transmission
• Voltage [V]: 12
• Weight [kg]: 0.07
• Operating Mode: Electric
• Number of pins: 7
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV003

• Vehicle Identification Number (VIN) from: 3A-TA000 001, 3A-TB000 001, 3A-TE000 001
• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 7
• Weight [kg]: 0.045
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 07.1995
• Construction Year to: 03.1997
• Vehicle Identification Number (VIN) from: 3A-T-000 001
• Manufacturer: BOSCH