• Surve (bar): 0,4
• Surve alates (bar): 0,35
• Surve (bar) kuni: 0,45
• Lüliti funktsioon: avaja
• Värv: sinine
• Võtmekaugus: 24
• Keermemõõt: M10 x 1
• Pistikkontaktide arv: 1
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Lülituspunkt alates [bar]: 0,3
• Lülituspunkt kuni [bar]: 0,55
• Pikkus (mm): 51
• Siseläbimõõt [mm]: 3,1
• Väliskeere [mm]: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Lisainfo: Oil pressure switch, 0.3-0.55 Bar

• Pistikkontaktide arv: 2
• Värvimarkeering: hall
• Tootja: JP GROUP A/S
• Lisainfo: Temperature sensor for cooling system, 2 pins

• Pistikkontaktide arv: 2
• Korpusevärv: helesinine
• Pistikukatte kuju: ovaalne
• Tootja: JP GROUP
• Lisainfo: Sender Unit, coolant temperature

• Pistikukatte kuju: ümar
• Rakendustüüp: hüdrauliline
• Keermemõõt: M 10
• Keerme samm (mm): 1
• Pistikkontaktide arv: 1
• Lülituspunkt alates [bar]: 0,3
• Lülituspunkt kuni [bar]: 0,55
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 61
• Spanner Size: 19
• Tootja: KAMOKA

• Fabrication Number: ECT-CH-006
• Tootja: NTY

• Mootorikood: Z 12 XE
• Värv: must
• Surve (bar) kuni: 0,55
• Surve alates (bar): 0,3
• Pressure [bar]: 0.5
• Thread Size: M10x1
• Spanner Size: 24
• Nimetus: EP 1.800.141
• Tootja: EPS

• Mootorikood: Z 12 XE
• Värv: must
• Surve (bar) kuni: 0,55
• Surve alates (bar): 0,3
• Surve (bar): 0,5
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Tootja: FACET

• Tootja piirang: BOSCH
• Pistikkontaktide arv: 2
• OE-numbri jaoks: 1338467;90541937
• Tootja: DELLO AUTOMEGA

• Keermemõõt: M 10x1
• Korpusevärv: must
• Tootja: FAE ELEKTRYKA
• Lisainfo: FE12436

• Lülitusrõhk [bar]: 0,5
• Keermemõõt: M10x1.0
• Anduritüüp: kinnine anduri ehitusviis
• Tootja: VERNET

• Surve (bar): 5,5
• Korpusevärv: sinine
• Keermemõõt: M10×1.6
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Tootja: DELPHI
• Nimetus: DE SW90015
• Kvaliteediklass: PJ

Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Thread Size: M12x1.5
• Spanner Size: 19
• Tootja: FAST

• Pressure [bar]: 0.4
• Thread Size: M10 x 1
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Tootja: ERA

• vana mudel:
• Pikkus (mm): 51
• Lülituspunkt alates [bar]: 0,3
• Lülituspunkt kuni [bar]: 0,55
• Siseläbimõõt [mm]: 3,1
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,027
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Model Year from: 2007
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• vana mudel:
• Pikkus (mm): 51
• Lülituspunkt alates [bar]: 0,3
• Lülituspunkt kuni [bar]: 0,55
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Kaal (kg): 0,04
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: BLUEPRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikukatte kuju: ristkülik
• Keerme samm (mm): 1,5
• Värvimarkeering: hall
• Anduritüüp: NTC-andur
• Keermemõõt: M 12
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pikkus (mm): 51
• Kõrgus (mm): 54,3
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Montaaživiis: kruvitud
• Piirangutega toode/piirangu info: koos tihendiga
• Surve alates (bar): 0,35
• Surve (bar) kuni: 0,55
• Ühenduste arv: 1
• Lüliti funktsioon: avaja
• Pistikukatte kuju: ümar
• Vastab originaalosa värvile: sinine
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M10 x 1
• Spanner Size: 24
• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.55
• Number of pins: 1
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-CH-017
• Tootja: NTY

• Fabrication Number: ECP-PL-010
• Tootja: NTY

• OE-numbri jaoks: 9118368
• Anduritüüp: passiivne andur
• Tootja: KAMOKA

• Pikkus (mm): 61
• Väliskeerme mõõde: M12 x 1,5
• Võtmekaugus: 19
• Ühenduste arv: 2
• Värv: hall
• Kruvipikkus kruvipea all [mm]: 28
• Kaal (kg): 0,023
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M12x1.5
• Tootja: VERNET

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46462179
• Supplementary Article/Info 2: with seal ring
• Tootja: NRF
• Lisainfo: 727005 NRF

• Ehitusaasta kuni: 09.2003
• Pistikkontaktide arv: 2
• Pistiku värv: sinakas valgus
• Pistikukatte kuju: ovaalne
• Keermemõõt: M 12x1,5
• Võtmekaugus: 19 mm
• OE-numbri jaoks: 46469865
• Tootja: MEAT&DORIA

• uus mudel:
• Lülituspunkt alates [bar]: 0,3
• Lülituspunkt kuni [bar]: 0,55
• Väliskeerme mõõde: M10 x 1
• Võtmekaugus: 22
• Ühenduste arv: 1
• Värv: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 150
• Weight [kg]: 0.01
• Guarantee: 3 years guarantee
• Cable Cross Section [mm²]: 0.75
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 53SKV283

• Pikkus (mm): 61
• Väliskeerme mõõde: M12 x 1,5
• Võtmekaugus: 19
• Ühenduste arv: 2
• Värv: hall
• Kruvipikkus kruvipea all [mm]: 28
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 40 92 8381
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Tootja: NISSENS
• Nimetus: NI 207019

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Lülitusrõhk [bar]: 2
• Keermemõõt: M10x1.0
• Anduritüüp: kinnine anduri ehitusviis
• Tootja: VERNET

• Ehitusaasta kuni: 03.2004
• Korpusevärv: sinine
• Pistikkontaktide arv: 2
• Keermemõõt: M12X1.5-6g
• Võtmekaugus: 19
• Tootja: DELPHI
• Nimetus: DE TS10253

• Fabrication Number: ESS-FT-002
• Tootja: NTY

• uus mudel:
• Lülituspunkt alates [bar]: 0,3
• Lülituspunkt kuni [bar]: 0,55
• Väliskeerme mõõde: M10 x 1
• Võtmekaugus: 22
• Ühenduste arv: 1
• Värv: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 40 92 7223
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kasutuspinge [V]: 12
• Anduritüüp: passiivne andur
• Takistus [oom]: 900
• Installatsiooni sügavus (mm): 34,5
• Piirangutega toode/piirangu info 2: koos rõngastihendiga, ilma kaablita
• Pistikkontaktide arv: 2
• Tootja: JP GROUP A/S
• Lisainfo: Sensor, crankshaft pulse

• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• for OE number: 9947855
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mootorikood: Z 12 XE
• Värv: must
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Nimetus: EP 1.830.239
• Tootja: EPS

• Mootorikood: Z 12 XE
• Värv: must
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Vastab originaalosa värvile: valge, roheline, must
• tootekoodile: 7.8170, 7.8190
• Tootja: FACET

• Pistikkontaktide arv: 2
• Keermemõõt: M12x1,5
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Korpusevärv: must
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Välisläbimõõt [mm]: 7,4
• Takistus [oom]: 2 080, 294
• Piirangutega toode/piirangu info: koos tihendiga
• Väliskeere [mm]: 12
• Keerme samm (mm): 1,5
• Temperatuurivahemik [°C]: 25, 80
• Montaaživiis: kruvitud
• Värv: sinine
• Võtmekaugus: 19
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Vastab originaalosa värvile: must, valge, helesinine
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: HELLA
• Nimetus: HE 6PT009107611

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

Tootja: NRF KLIMATYZACJA

• Väändejõud alates [Nm]: 20
• Pinge [V]: 12
• Lüliti funktsioon: avaja
• Voolutugevus (A): 0,25
• Tolerants (%): 15
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Surve alates (bar): 0,35
• Surve (bar) kuni: 0,55
• Pistikkontaktide arv: 1
• Vastab originaalosa värvile: sinine
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Nimetus: HE 6ZL008780011
• Tootja: HELLA

• Thread Size: M12 x 1,5
• Number of pins: 2
• Tootja: ERA

• vajaminev tükihulk: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• Kõrgus (mm): 34,5
• Takistus [oom]: 970
• Ühenduste arv: 2
• Tootja: VERNET

• Pistikkontaktide arv: 2
• Värvimarkeering: hall
• pakendi pikkus [cm]: 3,5
• pakendi laius [cm]: 6
• pakendi kõrgus [cm]: 3,5
• Kaal (kg): 0,026
• OE-numbri jaoks: 1338467, 1338C7, 90541937
• Tootja: AKSDASIS

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 17SKV228
• Tootja: ESEN SKV

• Supplementary Article/Supplementary Info: with gasket/seal
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pistikkontaktide arv: 2
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6

• Pistikkontaktide arv: 2
• Tootja: FAE

Tootja: MAGNETI MARELLI

• Mootorikood: Z 12 XE
• Nimetus: EP 1.953.235
• Tootja: EPS

• Number of pins: 3
• for OE number: 6238110
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mootorikood: Z 12 XE
• Tootja: FACET

• Kinnitusaukude hulk: 1
• Takistus [oom]: 970
• Tolerants (%): 10
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 2
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS10805

Lisainfo: "Tootja: DELPHI
CORSA B (73/, 78/, 7
(kvaliteediklass: PJ)"

• Pikkus (mm): 38
• Laius (mm): 67
• Kõrgus (mm): 34
• Ühenduste arv: 2
• vajaminev tükihulk: 1
• Takistus [oom]: 920
• Värv: must
• Rakendustüüp: elektriline
• Anduritüüp: passiivne andur, Induktiivandur
• Pistikkontaktide arv: 2
• Nominaalpinge (V): 12
• Installatsiooni sügavus (mm): 34,5
• Piirangutega toode/piirangu info 2: koos rõngastihendiga, ilma kaablita
• Pistikukatte kuju: ovaalne
• Kinnitusaukude hulk: 1
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pikkus (mm): 51
• Ühenduste arv: 2
• Kaal (kg): 0,065
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-PL-000
• Tootja: NTY

Tootja: DELLO AUTOMEGA

• Tootja: JP GROUP
• Lisainfo: Sensor, camshaft position

• Mootorikood: Z 12 XE
• Nimetus: EP 1.957.006
• Tootja: EPS

• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ühenduste arv: 2
• Kaal (kg): 0,001
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: BLUE PRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: Z 12 XE
• Tootja: FACET

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550305
• Tootja: ERA

• Ehitusaasta kuni: 02.2004
• Mootorikood: Z 12 XE
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Pinge [V]: 12
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Takistus [oom]: 970
• Tootja: VALEO

• Ehitusaasta kuni: 09.2003
• Tootja: BOSCH

• Pikkus (mm): 51
• Ühenduste arv: 2
• Kaal (kg): 0,065
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 40 92 4616
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Overall Length [mm]: 549
• Number of circuits: 4
• Oxygen Sensor: Thread pre-greased
• Fabrication Number: ESL-PL-013
• Tootja: NTY

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PG013114441

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Type: with housing
• Fabrication Number: EPP-PL-003
• Tootja: NTY