Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Material: Copper
- Shape: A Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
505.550, 505.540 - Tootja: ELRING
- Lisainfo: 115.100 ELR
- Mootorikood: OM 651.911
- Material: Copper
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Shape: A Shape
-
Nimetus: RONGASTIHEND,
OLI RAVOOLUKRUVI - Tootja: REI
-
Lisainfo: 41-
70089- 00
- Käigukasti liik: automaatkast 7 käiku
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- DIN/ISO: 7603
- Material: Copper
- Shape: A Shape
- Weight [kg]: 0.001
-
Nimetus: RONGASTIHEND,
OLI RAVOOLUKRUVI - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Käigukasti liik: automaatkast 7 käiku
- Material: Copper
- Inner Diameter [mm]: 12.5
- Thickness [mm]: 1.5
- Outer Diameter [mm]: 17
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Copper
- Inner Diameter [mm]: 14
- Thickness [mm]: 1.5
- Outer Diameter [mm]: 20
- Weight [kg]: 0.007
- Fitting Position: Oil Sump
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
DIN/ISO: 7603 A/
CU - Material: Copper
- Weight [kg]: 0.002
- Observe service information:
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
DIN/ISO: 7603 A/
CU - Material: Copper
- Weight [kg]: 0.002
-
Nimetus: RONGASTIHEND,
OLI RAVOOLUKRUVI - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Välisläbimõõt [mm]: 20
- Siseläbimõõt [mm]: 14
- Tootja: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Pikkus (mm): 33
-
Keermemõõt: M14 x 1,
50 - Tootja: 3RG
-
Käigukasti liik: Automaatkast,
5 käiku - Length [mm]: 12
- Outer Diameter [mm]: 14
- External Thread Size: M10 x 1
- Thread Length [mm]: 6
- Quality/ Grade: 5.8
- Spanner Size: 5
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 8
- Weight [kg]: 0.007
- Observe service information:
- Nimetus: SULGURKRUVI
- Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Material: Copper
- Thickness [mm]: 1.5
- Packing Type: Blister Pack
- Tootja: CORTECO
- Length [mm]: 33
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 8.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Screw length below head [mm]: 24
- Weight [kg]: 0.037
- Supplementary Article/Info 2: without seal ring
-
Nimetus: SULGURKRUVI,
OLIVANN - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 33
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 8.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Screw length below head [mm]: 24
- Weight [kg]: 0.04
- Supplementary Article/Info 2: without seal ring
- Tootja: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M14x1,
5 - Length [mm]: 24
- Additionally required articles (article numbers): 259.150.100
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: SW13
- Nimetus: SULGURKRUVI
- Tootja: FIS
- Length [mm]: 33
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 8.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Screw length below head [mm]: 24
- Weight [kg]: 0.037
- Supplementary Article/Info 2: without seal ring
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Käigukasti liik: automaatkast 7 käiku
- Length [mm]: 15
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 12
- Weight [kg]: 0.011
- Supplementary Article/Info 2: without seal ring
- Nimetus: SULGURKRUVI
- Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Käigukasti liik: automaatkast 7 käiku
- Length [mm]: 15
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
- Screw length below head [mm]: 12
- Weight [kg]: 0.012
- for OE number: 000908 012009 S2
- Supplementary Article/Info 2: with seal ring
-
Nimetus: SULGURKRUVI,
OLIVANN - Tootja: FEB
- Lisainfo: FE46409
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pikkus (mm): 33
- Välisläbimõõt [mm]: 19
-
Väliskeerme mõõde: M14 x 1,
5 - Keermepikkus (mm): 20
- Kvaliteet/klass: 8.8
- Võtmekaugus: 13
- Kruvipea-/Mutriprofiil: Väliskuuskant
- Materjal: Metall
- Kruvipikkus kruvipea all [mm]: 24
-
Kaal (kg): 0,
037 - Piirangutega toode/piirangu info 2: ilma rõngastihendita
- OE-numbri jaoks: 111 997 03 30
-
Tootja: ENERGY-
NARZÊDZIA WARSZTATOWE
-
Thread Size: M14x1,
5 - Length [mm]: 24
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: SW13
- Supplementary Article/Info 2: with seal ring
- Tootja: FA1 FISCHER
- Fitting Position: engine sided
- Thread Length [mm]: 24
- Thread Pitch [mm]: 1.5
- Required quantity: 1
- Material: Steel
-
Surface: Zinc-
coated -
Thread Size: M14 x 1,
5 - Supplementary Article/Info 2: with seal ring
- Length [mm]: 33
-
External Thread [mm]: M14 x 1,
5 - Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Weight [kg]: 0.048
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Alternatively:
-
Nimetus: Rongastihend,
oli ravoolukruvi - Tootja: FIS
-
Keermemõõt: M14 x 1,
5 - Kruvipikkus kruvipea all [mm]: 24
- Kruvipea-/Mutriprofiil: Väliskuuskant
- Võtmekaugus: 13
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Tootja: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Pikkus (mm): 33
- Materjal: Metall
- Võtmekaugus: 13
- Kruvipea-/Mutriprofiil: Väliskuuskant
- Piirangutega toode/piirangu info 2: ilma rõngastihendita
- Tootja: FAST
- Käigukasti liik: automaatkast 6 käiku
- Materjal: Metall
-
Keermemõõt: M8x1,
0 - Pikkus (mm): 10
-
Kruvipikkus kruvipea all [mm]: 7,
5 -
Kruvipea-/Mutriprofiil: sise-
Torx - Võtmekaugus: 4
- Piirangutega toode/piirangu info: koos tihendiga
- Materjal tihend: Vask
- Tootja: METZGER
-
Thread Size: M14x1,
5x33 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 13 mm
-
Alternative Repair Kit: 877.840,
505.540 - Supplementary Article/Info 2: without seal ring
- Tootja: ELRING
- Käigukasti liik: Automaatkäigukast
-
Installatsiooni pool: Õlivann,
Silindripea, Vändaraam, Õlifiltrikorpus -
Materjal: Metall,
Alumiinium -
Keermemõõt: M10 x 1,
0 - Pikkus (mm): 11
-
Kruvipikkus kruvipea all [mm]: 8,
1 - Kruvipea-/Mutriprofiil: sisekuuskant
- Võtmekaugus: 5
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Tootja: METZGER
- Materjal: Metall
-
Keermemõõt: M14x1,
5 - Pikkus (mm): 33
- Kruvipikkus kruvipea all [mm]: 24
- Kruvipea-/Mutriprofiil: Väliskuuskant
- Võtmekaugus: 13
- Piirangutega toode/piirangu info: koos tihendiga
- Materjal tihend: Vask
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 20
-
Jämedus/Tugevus (mm): 1,
5 - Konteineri tüüp: Kott
- Tootja: METZGER
-
Thread Size: M 14 x 1,
50 - Supplementary Article/Info 2: with seal ring
- Packing Type: Blister Pack
- Tootja: CORTECO
- Nimetus: COU 220120S
- Käigukasti liik: automaatkast 7 käiku
- Length [mm]: 15
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
-
Surface: Tin-
plated - Screw length below head [mm]: 13
- Weight [kg]: 0.011
- for OE number: 000908 012009 S1
- Supplementary Article/Info 2: with seal ring
- Nimetus: SULGURKRUVI
- Tootja: FEB
- Lisainfo: 46398 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog