• Üldine informatsioon: Fuel temperature sensor
• Tootja: VIKA
• Lisainfo: VIK99061780801

• Värvimarkeering: tumehall
• Pistikkontaktide arv: 2
• Pistikukatte kuju: D-kuju
• Pistiku värv: tumehall
• Installatsiooniläbimõõt (mm): 25
• Anduritüüp: NTC-andur
• Installatsiooni sügavus (mm): 20
• OE-numbri jaoks: 06A919501A
• Tootja: MEAT&DORIA

• Kerenumber (VIN) kuni: 6K-X-448600
• Pistikkontaktide arv: 4
• Pistiku värv: helesinine
• Pistikukatte kuju: nurgeline
• OE-numbri jaoks: 078919501B
• Tootja: MEAT&DORIA

• Mootorikood: ATD
• Korpusevärv: roheline
• Vastab originaalosa värvile: must
• Nimetus: EP 1.830.258
• Tootja: EPS

• Mootorikood: ATD
• Korpusevärv: roheline
• Vastab originaalosa värvile: must
• Tootja: FACET

• Pistikkontaktide arv: 4
• Pistikukatte kuju: D-kuju
• Pistiku värv: roheline
• Installatsiooniläbimõõt (mm): 20
• Läbimõõt [mm]: 25,5
• OE-numbri jaoks: 059919501A
• Tootja: MEAT & DORIA

• Üldine informatsioon: Intake air temperature sensor
• Tootja: VIKA

• Korpusetüüp: ilma korpuseta
• Piirangutega toode/piirangu info 2: koos klambriga, koos rõngastihendiga
• Pistikukatte kuju: D-kuju
• Anduritüüp: NTC-andur
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Anduritüüp: NTC-andur
• Pinge [V]: 12
• Pikkus (mm): 20
• Värvimarkeering: hall
• Tootja: MAGNETI MARELLI
• Nimetus: MM SPA111

• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 059 919 501 A
• Värvimarkeering: roheline
• Vedrukuju: Kinnitusvedru
• Pistikkontaktide arv: 4
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: ATD
• Pistikkontaktide arv: 2
• Pistikukatte kuju: D-kuju
• Pistiku värv: must
• Anduritüüp: NTC-andur
• Montaaživiis: Stoperdatud
• Installatsiooni pool: Kütusetorustik
• OE-numbri jaoks: 038906081B
• Tootja: MEAT&DORIA

• Mootorikood: ATD
• Nimetus: EP 1.994.006
• Tootja: EPS

• Mootorikood: ATD
• Tootja: FACET

• Surve alates [kPA]: 20
• Surve kuni [kPA]: 25
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: AB 120-08-004
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Kerenumber (VIN) kuni: 6K-X-448600
• Pistikkontaktide arv: 4
• Korpusevärv: sinine
• Installatsiooniläbimõõt (mm): 20
• Tootja: FAE

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Tootja: ERA

• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,06
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 17SKV486
• Tootja: ESEN SKV

• Üldine informatsioon: Air intake pressure sensor
• Tootja: VIKA

• Kerenumber (VIN) alates: 6K-X-448601
• Pistikkontaktide arv: 4
• Installatsiooniläbimõõt (mm): 20
• Korpusevärv: must
• Tootja: FAE

• Number of pins: 4
• for OE number: 281002399
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pikkus (mm): 445
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• OE-numbri jaoks: 03G 906 051 D
• Tootja: TRUCKTEC

• Ehitusaasta alates: 03.2003
• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Kaal (kg): 0,04
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV126

• OE-numbri jaoks: 1100748
• Anduritüüp: Aktiivne andur
• Tootja: KAMOKA

• OE-numbri jaoks: 03G 906 433
• Anduritüüp: Aktiivne andur
• Tootja: KAMOKA

• Üldine informatsioon: Air intake pressure sensor
• Tootja: VIKA

• Pistikkontaktide arv: 2
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: ATD
• Pistikkontaktide arv: 4
• Tootja: JPN

• Läbimõõt [mm]: 25
• Pikkus (mm): 50
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 059 919 501
• Vedrukuju: Kinnitusvedru
• Pistikkontaktide arv: 4
• Pistikukatte kuju: nurgeline
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pinge [V]: 12
• Pikkus (mm): 340
• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV365

• Pistikkontaktide arv: 4
• Pistikute teostus: Female
• Ülekandeliinide arv: 4
• juhtmeisolatsiooni materjal: Silikoon
• Materjal: CuSn (vask-tina)
• Kaablipikkus (mm): 250
• Kaabli ristlõige alates [mm²]: 0,5
• Kaabli ristlõige kuni [mm²]: 0,5
• Tootja: 3RG

• Ehitusaasta alates: 03.2003
• Kerenumber (VIN) alates: 1U..3..768 638, 1U..3A016 278, 1U..38696 293
• Tootja: BOSCH
• Nimetus: BS 0261230266

• Ehitusaasta kuni: 02.2003
• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Kaal (kg): 0,04
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 17SKV127
• Tootja: ESEN SKV

• Mootorikood: ATD
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pinge [V]: 12
• Pistikukatte kuju: D-kuju
• Piirangutega toode/piirangu info 2: koos kaabliga
• Tootja: VALEO
• Nimetus: VA 253807
• Lisainfo: VAL253807

• Pistikkontaktide arv: 5
• Pinge [V]: 12
• Seerianumber: EPP-AU-002
• Tootja: NTY

• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 445
• Anduritüüp: Hallsensor
• Ühenduste arv: 3
• Tootja: VERNET

• vajaminev tükihulk: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kaabliga
• Korpusevärv: must
• Tootja: BREMI

• Pistikkontaktide arv: 5
• Korpusetüüp: koos korpusega
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: AB 120-08-086
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• vajaminev tükihulk: 1
• Ehitusaasta kuni: 02.2003
• Tootja: BREMI

Tootja: MAGNETI MARELLI

• Pistikkontaktide arv: 3
• Pistikukatte kuju: D-kuju
• Anduritüüp: Hallsensor
• OE-numbri jaoks: 045957147B
• Tootja: MEAT&DORIA

• Pinge [V]: 12
• Seerianumber: EPP-AU-031
• Tootja: NTY

• Pikkus (mm): 245
• Pistikkontaktide arv: 3
• Tootja: DELPHI
• Kvaliteediklass: PJ
• Nimetus: Camshaft position sensor

Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Seerianumber: EPP-AU-004
• Tootja: NTY

• Pistikkontaktide arv: 5
• Korpuse materjal: Plastik
• Korpusetüüp: koos korpusega
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: AB 120-08-068
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pikkus (mm): 358
• Ühenduste arv: 3
• Kaablipikkus (mm): 265
• Kaal (kg): 0,04
• Tootja: FEBI BILSTEIN
• Lisainfo: F37607

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta alates: 03.2003
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info: koos tihendiga
• Värv: must
• Materjal: Plastik
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: koos kaabliga
• Piirangutega toode/piirangu info: kaablikaitsetoruga
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• tootekoodile: 111420
• Üldine informatsioon: Air intake pressure sensor
• Tootja: BORSEHUNG

• valikuliselt:
• Pistikkontaktide arv: 3
• alternatiivne remondikomplekt: 550254
• Kogupikkus [mm]: 450
• Tootja: ERA

• valikuliselt:
• Pistikkontaktide arv: 4
• Surve alates [kPA]: 11
• Surve kuni [kPA]: 254
• Kaal (kg): 0,026
• alternatiivne remondikomplekt: 550132
• Tootja: ERA

• Pistikkontaktide arv: 5
• OE-numbri jaoks: 028906461
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: AB 120-08-070
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pikkus (mm): 330
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Tootja: METZGER

• Pikkus (mm): 358
• Ühenduste arv: 3
• Kaablipikkus (mm): 265
• Kaal (kg): 0,04
• Nimetus: SW 30 93 7607
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• tootmise kuupäev kuni: 01.03.2003
• Pistikukatte kuju: D-kuju
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 4
• Korpuse materjal: GFK (klaaskiuga tugevdatud plastmass)
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta alates: 03.2003
• Ühenduste arv: 4
• Kaal (kg): 0,026
• OE-numbri jaoks: 03G 906 051 D
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 380
• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 445, 330
• vajaminev tükihulk: 1
• Anduritüüp: Aktiivne andur, Hallsensor
• Ühenduste arv: 3
• Nominaalpinge (V): 12
• Piirangutega toode/piirangu info 2: koos kaabliga
• Korpusevärv: must
• Pistikukatte kuju: D-kuju
• Kinnitusaukude hulk: 1
• Pistiku värv: must
• OE-numbri jaoks: 045 957 147 A
• Tootja: VIEROL

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Rakendustüüp: elektriline
• Tootja: MAGNETI MARELLI

• Pikkus (mm): 260
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: HE 6PU012681051
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Ehitusaasta kuni: 03.2003
• Pistikkontaktide arv: 4
• Surve alates [kPA]: 26
• Tootja: DELPHI

• Pistikkontaktide arv: 4
• Surve alates [kPA]: 27
• Tootja: DELPHI
• Nimetus: DE PS10118

• Mootorikood: ATD
• Ehitusaasta alates: 03.2003
• Surve alates [kPA]: 11
• Surve kuni [kPA]: 254
• Väljundpinge alates [V]: 0,25
• Väljundpinge kuni [V]: 4,75
• Nimetus: EP 1.993.083
• Tootja: EPS

• Mootorikood: ATD
• Ehitusaasta alates: 03.2003
• Surve alates [kPA]: 11
• Surve kuni [kPA]: 254
• Väljundpinge alates [V]: 0,25
• Väljundpinge kuni [V]: 4,75
• Tootja: FACET

• Kerenumber (VIN) kuni: 1U-3-666 021
• Mootorikood: ATD
• Korpusetüüp: ilma korpuseta
• Pinge [V]: 12
• Kvaliteediklass: PJ
• Nimetus: Air flow sensor

• Ehitusaasta kuni: 04.2002
• Tootja: DENCKERMANN ELEKTRONIKA CEWKI CZUJNIKI

• Ühenduste arv: 4
• Kaal (kg): 0,03
• OE-numbri jaoks: 038 906 051
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: VIEROL

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta alates: 05.2002
• Kerenumber (VIN) alates: 1U..3..666 022, 1U..38665 264
• Kvaliteediklass: PJ
• Nimetus: Air flow sensor

• Mootorikood: ATD
• Pikkus (mm): 445
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: koos kaabliga
• Korpusevärv: must
• Tootja: FAE

• Kerenumber (VIN) kuni: 1U-3A...
• Pistikkontaktide arv: 4
• Surve kuni [kPA]: 243
• Tootja: FAE

• Kerenumber (VIN) alates: 1U-3A...
• Pistikkontaktide arv: 4
• Surve alates [kPA]: 20
• Surve kuni [kPA]: 254
• Tootja: FAE

• Pistikkontaktide arv: 5
• Pinge [V]: 12
• OE-numbri jaoks: 038906461B, 038906461BV, 038906461BX
• Tootja: DELLO AUTOMEGA

• Ehitusaasta kuni: 04.2002
• Pinge [V]: 12
• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 5
• Garantii: 3 aastat garantii
• Uus osa:
• Vana detaili tagastus mittevajalik:
• Kaal (kg): 0,28
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY