Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- General Information: Fuel temperature sensor
- Manufacturer: VIKA
- Additional information: VIK99061780801
- Lisainfo: VIK99061780801
- Colour Coding: dark grey
- Number of pins: 2
- Connector Shape: D Shape
- Socket colour: dark grey
- Fitted Diameter [mm]: 25
- Sensor Type: NTC Sensor
- Fitting Depth [mm]: 20
- for OE number: 06A919501A
- Manufacturer: MEAT&DORIA
-
Vehicle Identification Number (VIN) to: 6K-
X- 448600 - Number of pins: 4
- Socket colour: light blue
- Connector Shape: angular
- for OE number: 078919501B
- Manufacturer: MEAT&DORIA
- Engine Code: ATD
- Housing Colour: green
- Corresponds to the original part in colour: black
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: ATD
- Housing Colour: green
- Corresponds to the original part in colour: black
- Manufacturer: FACET
- Number of pins: 4
- Connector Shape: D Shape
- Socket colour: green
- Fitted Diameter [mm]: 20
- Diameter [mm]: 25.5
- for OE number: 059919501A
- Manufacturer: MEAT & DORIA
- General Information: Intake air temperature sensor
- Manufacturer: VIKA
- Housing Type: without housing
-
Supplementary Article/Info 2: with clip,
with seal ring - Connector Shape: D Shape
- Sensor Type: NTC Sensor
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Sensor Type: NTC Sensor
- Voltage [V]: 12
- Length [mm]: 20
- Colour Coding: grey
- Manufacturer: MAGNETI MARELLI
- Name: MM SPA111
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501 A
- Colour Coding: green
- Spring Design: Retaining Spring
- Number of pins: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ATD
-
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: EPS
- Engine Code: ATD
- Manufacturer: FACET
- Engine Code: ATD
- Number of pins: 2
- Connector Shape: D Shape
- Socket colour: black
- Sensor Type: NTC Sensor
- Mounting Type: Clipped
- Fitting Position: Fuel Line
- for OE number: 038906081B
-
Name: Andur,
ktusetemperatuur - Manufacturer: MD
- Pressure from [kPA]: 20
- Pressure to [kPA]: 25
- Assy./disassy. by qualified personnel required!:
-
Name: AB 120-
08- 004 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Vehicle Identification Number (VIN) to: 6K-
X- 448600 - Number of pins: 4
- Housing Colour: blue
- Fitted Diameter [mm]: 20
- Manufacturer: FAE
- Number of pins: 2
- Connector Shape: rectangular
- Manufacturer: ERA
- Plug housing design: Plug sleeve housing
- Manufacturer Restriction: VAG
- Cable Length [mm]: 500
- Number of pins: 2
- Supplementary Article/Info 2: with pipe
- Cable Cross Section [mm²]: 0.75
- Socket Width [mm]: 1.5
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- Current carrying capacity [A]: 9
- Operating voltage [V]: 24
-
for OE number: 1J6 943 021 B,
1JE 943 021, 1K8 943 021 C - for article number: 70660022
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
- Manufacturer: HBE
Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with heat shrink tubing
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.06
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV486
- Manufacturer: ESEN SKV
- General Information: Air intake pressure sensor
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: 6K-
X- 448601 - Number of pins: 4
- Fitted Diameter [mm]: 20
- Housing Colour: black
- Manufacturer: FAE
- Pistikkontaktide arv: 4
- OE-numbri jaoks: 281002399
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: ABAKUS LORO
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Length [mm]: 445
- Number of pins: 3
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- for OE number: 03G 906 051 D
- Manufacturer: TRUCKTEC
- Construction Year from: 03.2003
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 4
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV126
- for OE number: 1100748
- Sensor Type: Active sensor
- Manufacturer: KAMOKA
- for OE number: 03G 906 433
- Sensor Type: Active sensor
- Manufacturer: KAMOKA
- General Information: Air intake pressure sensor
- Manufacturer: VIKA
- Construction Year to: 02.2003
-
Vehicle Identification Number (VIN) to: 1U..3..768637,
1U..3A016277, 1U..38696292 - Number of pins: 4
-
Name: ANDUR,
KOMPRESSORIROHK - Manufacturer: MAX
- Number of pins: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ATD
- Number of pins: 4
- Manufacturer: JPN
- Voltage [V]: 12
- Length [mm]: 340
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.08
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV365
- Number of pins: 4
- Plug Type: Female
- Number of circuits: 4
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Cable Length [mm]: 250
- Cable cross-section from [mm²]: 0.5
- Cable cross-section to [mm²]: 0.5
- Manufacturer: 3RG
- Diameter [mm]: 25
- Length [mm]: 50
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501
- Spring Design: Retaining Spring
- Number of pins: 4
- Connector Shape: angular
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 03.2003
-
Vehicle Identification Number (VIN) from: 1U..3..768 638,
1U..3A016 278, 1U..38696 293 -
Name: ANDUR,
KOMPRESSORIROHK - Manufacturer: BOS
- Number of pins: 3
- Connector Shape: D Shape
- Sensor Type: Hall Sensor
- for OE number: 045957147B
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MD
- Construction Year to: 02.2003
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 4
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV127
- Manufacturer: ESEN SKV
- Number of pins: 5
- Voltage [V]: 12
-
Fabrication Number: EPP-
AU- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: ATD
- Sensor Type: Hall Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: D Shape
- Supplementary Article/Info 2: with cable
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: VAL
- Lisainfo: VAL253807
- Additional information: VAL253807
- Supplementary Article/Info 2: with cable
- Length [mm]: 445
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
-
Name: CZUJNIK POO½ENIA WAKA ROZRZ. VW POLO 01-
- Manufacturer: BRM
- Number of pins: 5
- Housing Type: with housing
- Assy./disassy. by qualified personnel required!:
-
Name: AB 120-
08- 086 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Required quantity: 1
- Construction Year to: 02.2003
- Name: CZUJNIK CIN. POWIETRZA
- Manufacturer: BRM
Manufacturer: MAGNETI MARELLI
- Voltage [V]: 12
-
Fabrication Number: EPP-
AU- 031 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Sensor Type: Hall Sensor
- Cable Length [mm]: 306
- Supplementary Article/Supplementary Info: with cable protection pipe
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: MEY
- Length [mm]: 245
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
-
Fabrication Number: EPP-
AU- 004 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 5
- Housing material: Plastic
- Housing Type: with housing
- Assy./disassy. by qualified personnel required!:
-
Name: AB 120-
08- 068 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Length [mm]: 358
- Number of connectors: 3
- Cable Length [mm]: 265
- Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
- Additional information: F37607
- Lisainfo: F37607
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 03.2003
- Number of pins: 4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Connector Shape: D Shape
- Number of pins: 3
- Supplementary Article/Info 2: with cable
- Supplementary Article/Supplementary Info: with cable protection pipe
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for article number: 111420
- General Information: Air intake pressure sensor
- Manufacturer: BORSEHUNG
- Alternatively:
- Number of pins: 3
- Alternative Repair Kit: 550254
- Total Length [mm]: 450
- Manufacturer: ERA
- Alternatively:
- Number of pins: 4
- Pressure from [kPA]: 11
- Pressure to [kPA]: 254
- Weight [kg]: 0.026
- Alternative Repair Kit: 550132
- Manufacturer: ERA
- Number of pins: 5
- for OE number: 028906461
- Assy./disassy. by qualified personnel required!:
-
Name: AB 120-
08- 070 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Length [mm]: 330
- Sensor Type: Hall Sensor
- Number of pins: 3
- Manufacturer: METZGER
- Engine Code: ATD
- Length [mm]: 340
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: EPS
- Length [mm]: 358
- Number of connectors: 3
- Cable Length [mm]: 265
- Weight [kg]: 0.04
- Name: SW 30 93 7607
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 260
- Sensor Type: Hall Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Production date to: 01.03.2003
- Connector Shape: D Shape
- Sensor Type: NTC Sensor
- Number of pins: 4
-
Housing material: GRP
(Glass fibre Reinforced Plastic) - Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 03.2003
- Number of connectors: 4
- Weight [kg]: 0.026
- for OE number: 03G 906 051 D
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 380
- Number of pins: 3
-
Cable Length [mm]: 445,
330 - Required quantity: 1
-
Sensor Type: Active sensor,
Hall Sensor - Number of connectors: 3
- Rated Voltage [V]: 12
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Connector Shape: D Shape
- Number of mounting bores: 1
- Socket colour: black
- for OE number: 045 957 147 A
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 02.2003
- Sensor Type: Piezoelectric Sensor
- Number of pins: 4
-
Name: Andur,
ohuvotu rohk - Manufacturer: MEY
- Lisainfo: 1148120006
- Additional information: 1148120006
Supplementary Article/Info 2: with integrated air temperature sensor, with seal ring
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
- Construction Year to: 03.2003
- Number of pins: 4
- Pressure from [kPA]: 26
- Manufacturer: DELPHI
- Observe technical data:
- Fitting Position: before catalytic converter
- Manufacturer Restriction: VAG
- Number of pins: 6
- Cable Length [mm]: 250
- Cable Cross Section [mm²]: 1
- Socket Width [mm]: 2.8
-
Contact surface: Tin-
plated -
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
tagatuli - Manufacturer: HBE
Air Pressure Sensor,
DELPHI
- Number of pins: 4
- Pressure from [kPA]: 27
- Manufacturer: DELPHI
- Name: DE PS10118
- Engine Code: ATD
- Construction Year from: 03.2003
- Pressure from [kPA]: 11
- Pressure to [kPA]: 254
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.75
- Name: EP 1.993.083
- Manufacturer: EPS
- Engine Code: ATD
- Construction Year from: 03.2003
- Pressure from [kPA]: 11
- Pressure to [kPA]: 254
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.75
- Manufacturer: FACET
-
Vehicle Identification Number (VIN) to: 1U-
3- 666 021 - Engine Code: ATD
- Housing Type: without housing
- Voltage [V]: 12
- Quality class: PJ
- Name: Air flow sensor
- Construction Year to: 04.2002
- Manufacturer: DENCKERMANN ELEKTRONIKA CEWKI CZUJNIKI
- Number of connectors: 4
- Weight [kg]: 0.03
- for OE number: 038 906 051
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pinge [V]: 12
- Installatsiooni sügavus (mm): 44
- Ühenduste arv: 2
- Manufacturer: BERU
- for OE number: 038906461C
- Number of pins: 5
- Voltage [V]: 12
- Manufacturer: DELLO AUTOMEGA
- Construction Year from: 05.2002
-
Vehicle Identification Number (VIN) from: 1U..3..666 022,
1U..38665 264 - Quality class: PJ
- Name: Air flow sensor
- Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ATD
- Length [mm]: 445
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Manufacturer: FAE
-
Vehicle Identification Number (VIN) from: 1U-
3A... - Number of pins: 4
- Pressure from [kPA]: 20
- Pressure to [kPA]: 254
- Manufacturer: FAE
- Construction Year to: 04.2002
- alternatively:
-
Vehicle Identification Number (VIN) to: 1U..3..666021,
1U..38665263 - Name: OHUMASSIMOOTJA
- Manufacturer: MAX
- Number of pins: 5
- Voltage [V]: 12
-
for OE number: 038906461B,
038906461BV, 038906461BX - Manufacturer: DELLO AUTOMEGA
- Construction Year to: 04.2002
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.28
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV016
- Construction Year to: 04.2002
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- New Part:
- Used part return not required:
- Weight [kg]: 0.28
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
-
Vehicle Identification Number (VIN) to: 1U-
3A... - Number of pins: 4
- Pressure to [kPA]: 243
- Manufacturer: FAE
- Construction Year to: 04.2002
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.28
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV097
- Engine Code: ATD
- Voltage [V]: 12
- Name: Ohumassimootja
- Manufacturer: MAX
- Construction Year to: 02.2003
- Guarantee: 5 years guarantee
- Manufacturer: HUCO
- Construction Year from: 05.2002
-
Vehicle Identification Number (VIN) from: 1U-
38665 264 - Number of pins: 5
- Housing Type: with housing
- Manufacturer: JP GROUP
- Lisainfo: Air meter
- Additional information: Air meter
- Construction Year from: 03.2003
- Number of pins: 4
- Mounting Type: Bolted
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: HE 6PP009400471
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: ATD
- Voltage [V]: 12
- Name: OHUMASSIMOOTJA
- Manufacturer: MAX
Manufacturer: MAGNETI MARELLI
- Pinge [V]: 12
- Pistikkontaktide arv: 5
- Garantii: 3 aastat garantii
- Uus osa:
- Vana detaili tagastus mittevajalik:
-
Kaal (kg): 0,
07 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV504
- Construction Year to: 02.2003
- Mounting Type: Bolted
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
-
Name: Andur,
kompressorirohk - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: ATD
- Voltage [V]: 12
- Name: OHUMASSIMOOTJA
- Manufacturer: MAX
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.26
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
for PR number: 0GG,
0GZ - Housing Type: with housing
- Number of pins: 5
- Housing material: Plastic
- Connector Shape: D Shape
- Number of mounting bores: 2
- Supplementary Article/Info 2: with integrated grille
- Recommended additional repairs: Air Filter
- Article number of recommended accessories: 113 884
- New Part:
- Used part return not required:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quality: OE EQUIVALENT
- for OE number: 1428448
- Manufacturer: MEAT&DORIA
-
Vehicle Identification Number (VIN) from: 1U..3..666 022,
1U..38665 264 - Block Separation:
- Quality: OE EQUIVALENT
- for OE number: 0281002531
- Manufacturer: MEAT&DORIA
- Operating Mode: Electric
- Name: OHUMASSIMOOTJA
- Manufacturer: MAG
- Pinge [V]: 12
- Pistikkontaktide arv: 5
- Garantii: 3 aastat garantii
- Uus osa:
- Vana detaili tagastus mittevajalik:
-
Kaal (kg): 0,
07 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV501
- Engine Code: ATD
- Construction Year to: 02.2003
- Pressure from [kPA]: 11
- Pressure to [kPA]: 254
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.75
- Name: EP 1.993.012
- Manufacturer: EPS
- Engine Code: ATD
- Construction Year to: 02.2003
- Pressure from [kPA]: 11
- Pressure to [kPA]: 254
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.75
- Manufacturer: FACET
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Name: OHUMASSIMOOTJA
- Manufacturer: HUC
- Construction Year to: 04.2002
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: DLP
- Vehicle Identification Number (VIN) from: 1U..3..666022
- Construction Year from: 05.2002
- Supplementary Article/Supplementary Info: without suction pipe
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Name: HU 138989
-
Manufacturer: HUECO /
HITACHI
Technical Information: Designed as plug-in sensor: Original tube is used furthermore. Look out for contamination!
- Construction Year from: 05.2002
- Housing Type: without housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
-
Name: PRZEPYWOMIERZ POWIETRZA AUDI A3 96-
- Manufacturer: DLP
- Construction Year from: 05.2002
-
Mounting Type: Pipe-
neck - Number of pins: 5
- Suction pipe connector diameter [mm]: 70
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: Ohumassimootja
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
- Construction Year to: 04.2002
- Housing Type: without housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DLP
Name: PRZEPYWOMIERZ POWIETRZA AUDI A3, A4/ VW GOLF, NEW BEETLE, POLO, SHARAN 95-10
- Construction Year to: 02.2003
-
Vehicle Identification Number (VIN) to: 1U..3..768 637,
1U..3A016 277, 1U..38696 292 -
Name: ANDUR,
KOMPRESSORIROHK - Manufacturer: BOS
- Operating Mode: Electronic
- Manufacturer: MAGNETI MARELLI
- Guarantee: 5 years guarantee
- Cable Length [mm]: 445
- Number of pins: 3
- Manufacturer: HUCO
- Construction Year to: 04.2002
- Mounting Type: Bolted
- Number of pins: 5
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 8ET009142561
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Korpusetüüp: ilma korpuseta
- Piirangutega toode/piirangu info 2: ilma integreeritud õhutemperatuuri sensorita
- Name: OHUMASSIMOOTJA
- Manufacturer: NTK
- Operating Mode: Electric
- Name: OHUMASSIMOOTJA
- Manufacturer: MAG
- Recommended additional repairs: Air Filter
- General Information: Air mass meter
- Manufacturer: VIKA
- for OE number: 038 906 461 B
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Name: OHUMASSIMOOTJA
- Manufacturer: BRM
-
Vehicle Identification Number (VIN) to: 1U-
3- 666 021 - Engine Code: ATD
- Operating Mode: Electric
- Voltage [V]: 12
- Housing Type: without housing
- Name: OHUMASSIMOOTJA
- Manufacturer: PIE
- for OE number: 06A 906 461
- Required quantity: 1
- Construction Year to: 04.2002
- Voltage [V]: 12
- Number of pins: 5
- Manufacturer: BREMI
- Construction Year from: 05.2002
-
Emission Standard: Euro 3
(D3), Euro 4 (D4) - Block Separation:
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
-
Name: DE AF10248-
12B1
-
General Information: Sold in Hitachi brand:
printing and packaging - Manufacturer: HUCO
- Vehicle Identification Number (VIN) from: 1U..3..666022
- Construction Year from: 05.2002
- Supplementary Article/Supplementary Info: without suction pipe
-
General Information: Sold in Hitachi brand:
printing and packaging - Manufacturer: HUCO
Technical Information: Designed as plug-in sensor: Original tube is used furthermore. Look out for contamination!
- Construction Year to: 04.2002
- Mounting Type: Bolted
- Number of pins: 5
- Suction pipe connector diameter [mm]: 70
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year to: 04.2002
-
Vehicle Identification Number (VIN) to: 1U..3..666 021,
1U..38665 263 - Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: BOS
- Construction Year to: 04.2002
- Engine Code: ATD
- New Part:
- Used part return not required:
- Recommended additional repairs: Air Filter
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 04.2002
- alternatively:
-
Vehicle Identification Number (VIN) to: 1U..3..666 021,
1U..38665 263 - Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: BOS
-
Vehicle Identification Number (VIN) from: 1U-
38665 264 - Engine Code: ATD
- Operating Mode: Electric
- Voltage [V]: 12
- Housing Type: without housing
- Name: OHUMASSIMOOTJA
- Manufacturer: PIE
- Construction Year from: 05.2002
-
Vehicle Identification Number (VIN) from: 1U..3..666 022,
1U..38665 264 - Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: BOS
- Supplementary Article/Supplementary Info: without pipe
- Supplementary Article/Info 2: Can only be fitted with original mounting
- for OE number: 074906461BX
- Manufacturer: MEAT&DORIA
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: D Shape
- Number of pins: 3
- Cable Length [mm]: 410
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks