• Emission Standard: Euro 2
• Length [mm]: 410
• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-CT-003
• Manufacturer: NTY
• Name: NTY ESL-CT-003

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Overall Length [mm]: 565
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-CT-009
• Manufacturer: NTY

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Emission Standard: Euro 3 (D3)
• not for country specific design: France
• Length [mm]: 555
• Transmission Type: Manual Transmission
• Fabrication Number: ESL-CT-004
• Manufacturer: NTY
• Name: NTY ESL-CT-004

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Emission Standard: Euro 3 (D3)
• Country Specific Design: France
• Length [mm]: 410
• Fabrication Number: ESL-CT-007
• Manufacturer: NTY
• Name: NTY ESL-CT-007

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Emission Standard: Euro 3 (D3)
• not for country specific design: France
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: KFW (TU3JP), KFX (TU3JP)
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe
• Emission Standard: CEE 95, Technical pollution reduction K
• Number of pins: 4
• Length [mm]: 445
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lambda Sensor: Diagnostic Probe
• Length [mm]: 1,500
• Fabrication Number: ESL-CT-018
• Manufacturer: NTY

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Engine Code: KFX (TU3JP)
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe
• Emission Standard: FL5/L5, L4, 15-04
• Block Separation:
• for DAM number from: 10584YQ
• for RPO number from: 10556
• Number of pins: 4
• Length [mm]: 660
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Engine Code: KFX (TU3JP)
• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 410
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe, Heated
• Emission Standard: Euro 2
• Engine Code: KFW (TU3JP), KFX (TU3JP)
• Number of circuits: 4
• Length [mm]: 381
• Name: Lambda andur
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Engine Code: KFW (TU3JP), KFW (TU3A)
• Construction Year from: 03.2000
• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Lambda Sensor
• for OE number: 1628KN
• Block Separation:
• for RPO number: 10584YQ
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: KFX (TU3JP), KFW (TU3JP)
• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Construction Year from: 03.2000
• for OE number: 16289A
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV904
• Manufacturer: ESEN SKV

• Construction Year from: 09.2000
• Construction Year to: 02.2009
• Engine Code: TU3JP (KFW)
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Engine Code: KFX (TU3JP)
• Lambda Sensor: Diagnostic Probe, Planar probe
• Fitting Position: after catalytic converter
• Block Separation:
• for RPO number from: 10556, 09086
• for DAM number from: 10584YQ
• for RPO number up to: 10555
• Number of pins: 4
• Length [mm]: 590
• Name: LAMBDA ANDUR
• Manufacturer: HAN

Emission Standard: FL5/L5, L4, 15-04, CEE 2000, Technical pollution reduction K General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: KFW (TU3JP), KFX (TU3JP)
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe
• Emission Standard: IFL4
• Number of pins: 4
• Length [mm]: 455
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Resistor [Ohm]: 6
• Length [mm]: 570
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 570
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: KFX (TU3JP)
• Cable Length [mm]: 370
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: KFW (TU3JP), KFX (TU3JP), KFW (TU3A)
• Construction Year from: 03.2000, 02.2004
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• for manufacturer exhaust norm: EURO2000;CEE2000
• Block Separation:
• Construction Year to: 02.2009, 12.2005
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Engine Code: KFX (TU3JP)
• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Emission Standard: CEE 2000
• Number of circuits: 4
• Overall Length [mm]: 410
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: KFX
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Emission Standard: Euro 3 (D3)
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,250
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.181
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Emission Standard: Euro 3 (D3)
• not for country specific design: France
• Fitting Position: before catalytic converter
• Cable Length [mm]: 525
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"

• Resistor [Ohm]: 3.5
• Length [mm]: 570
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 570
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Voltage [V]: 12
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV097
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Heated
• Emission Standard: Euro 3
• Country Specific Design: France
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 300
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Emission Standard: Euro 3 (D3)
• not for country specific design: France
• Block Separation:
• Cable Length [mm]: 380
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 02.2009
• Engine Code: TU3JP (K6C)
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year from: 09.2000
• Construction Year to: 02.2009
• Engine Code: TU3JP (KFW)
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Construction Year to: 02.2009
• Engine Code: TU3JP (KFX)
• Transmission Type: Manual Transmission
• Emission Standard: Euro 2
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
106 I (1A, 1C), 08.9
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
106 I (1A, 1C), 08.9
(kvaliteediklass: Q)"

• Engine Code: KFX
• Lambda Sensor: Regulating Probe, Heated, Thread pre-greased
• Emission Standard: Euro 3 (D3)
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: angular
• Thread Size: 18x1,5
• Length [mm]: 400
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.163
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Length [mm]: 400
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV687

• Lambda Sensor: Heated
• Thread Size: M18 x 1,5
• Number of pins: 4
• Connector Shape: rectangular
• Overall Length [mm]: 600
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: KFW (TU3JP)
• Construction Year from: 03.2000
• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• for OE number: 1628 HN
• Number of circuits: 4
• Overall Length [mm]: 565
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Emission Standard: Euro 3 (D3)
• not for country specific design: France
• Fitting Position: before catalytic converter
• Cable Length [mm]: 530
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: KFW (TU3A), KFW (TU3JP)
• Construction Year from: 03.2000
• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Length [mm]: 550
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: KFW (TU3A), KFX (TU3JP)
• Fitting Position: before catalytic converter
• Emission Standard: EEC 2000
• Lambda Sensor: Regulating Probe, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.092
• for OE number: 1618.Z6
• Name: SW 33 10 3089
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe, Unheated
• Emission Standard: Euro 3 (D3)
• Number of pins: 4
• Cable Length [mm]: 540
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Conductor Number: 4
• Resistor [Ohm]: 9
• Length [mm]: 1,520
• Number of circuits: 4
• Cable Length [mm]: 1,520
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: 18x1,5
• Connector Shape: angular
• Cable Length [mm]: 400
• Conductor Number: 4
• Length [mm]: 630
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.137
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: KFX (TU3JP), KFW (TU3JP)
• Emission Standard: Euro 2, Euro 3
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: round
• Conductor Number: 4
• Cable Length [mm]: 450
• Thread Size: M18 x 1,5
• Length [mm]: 570
• Version: ZR-PLANAR
• Weight [kg]: 0.143
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Heated
• Emission Standard: Euro 3
• not for country specific design: France
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 600
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 450
• Connector Shape: angular
• Conductor Number: 4
• Thread Size: M18 x 1,5
• Cable Length [mm]: 330
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Weight [kg]: 0.13
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Heated, Thread pre-greased
• Emission Standard: Euro 3 (D3)
• not for country specific design: France
• Quantity: 1
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Number of circuits: 4
• Socket colour: green
• Connector Shape: rectangular
• Thread Size: M18 x 1,5
• Weight [kg]: 0.138
• for OE number: 96 369 687 80
• Cable Length [mm]: 500
• Length [mm]: 600
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: KFX (TU3JP)
• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Emission Standard: CEE 95 L3
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: KFX (TU3JP), KFW (TU3JP), KFW (TU3A)
• Construction Year to: 02.2009, 12.2005
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Emission Standard: CEE 2000
• Block Separation:
• Construction Year from: 02.2004
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: KFW (TU3A), TU3A
• Fitting Position: before catalytic converter
• Emission Standard: Euro 2
• Required quantity: 1
• Switching Capacity [W]: 15
• Length [mm]: 410
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.998.068
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: KFX (TU3JP)
• Cable Length [mm]: 1
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: KFX (TU3JP)
• Cable Length [mm]: 540
• Manufacturer: DELPHI
• Name: DE ES20258-12B1

• Engine Code: KFX (TU3JP)
• Construction Year to: 02.2009
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Emission Standard: CEE 2000
• Number of circuits: 4
• Overall Length [mm]: 1,510
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH
• Name: BS 0258006029

• Engine Code: KFX (TU3JP)
• not for country specific design: France
• Fitting Position: before catalytic converter
• Emission Standard: Euro 3
• Required quantity: 1
• Switching Capacity [W]: 10
• Length [mm]: 565
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Construction Year to: 02.2009
• Engine Code: TU3JP (KFX)
• Transmission Type: Manual Transmission
• Emission Standard: Euro 2
• Exhaust System: for pre-catalytic converter
• for OE number: 16287R
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 545
• Number of pins: 4
• Weight [g]: 102
• Gross Weight [g]: 132
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Construction Year from: 09.2000
• Construction Year to: 02.2009
• Engine Code: TU3JP (KFW)
• for OE number: 1628NY
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 535
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 130
• Manufacturer: DENSO
• Name: DN DOX-1538
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Lambda Sensor: Diagnostic Probe
• Emission Standard: Euro 3
• not for country specific design: France
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 570
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.