• Fitting Position: Front Axle
• Inner Diameter [mm]: 79.3
• Width [mm]: 10.3
• Outer Diameter [mm]: 99
• Number of Teeth, ABS ring: 48
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: PSA
• Additional information: PSA

• for RPO number up to: 09457
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Hall Sensor
• Cable Length [mm]: 740
• Number of pins: 2
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Front Axle
• Outer Diameter [mm]: 99
• Width [mm]: 10.3
• Number of Teeth: 48
• Inner Diameter [mm]: 79
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Number of Teeth: 48
• Width [mm]: 10
• Inner Diameter [mm]: 79
• Outer Diameter [mm]: 99
• Fabrication Number: NZA-CT-002
• Manufacturer: NTY
• Lisainfo: 48 T 99 MM / 80 MM / 10 MM
• Additional information: 48 T 99 MM / 80 MM / 10 MM

• Fitting Position: Front Axle both sides
• Width [mm]: 10.3
• Number of Teeth, ABS ring: 48
• Inner Diameter [mm]: 90
• Outer Diameter [mm]: 99
• Weight [kg]: 0.078
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 90
• Thickness [mm]: 10.3
• Number of Teeth: 48
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 86
• Outer Diameter [mm]: 99
• Width [mm]: 10
• Number of Teeth: 48
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 27-0339
• Additional information: 27-0339

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 90
• Outer Diameter [mm]: 99
• Width [mm]: 10.3
• Number of Teeth: 48
• Name: ANDUR,ABS
• Manufacturer: MAX

• Outer Diameter [mm]: 99.2
• Fitting Position: Front Axle both sides
• Width [mm]: 10
• Number of Teeth, ABS ring: 48
• Inner Diameter [mm]: 86
• Weight [kg]: 0.121
• Manufacturer: VEMO
• Lisainfo: V24-92-0001 VEM
• Additional information: V24-92-0001 VEM

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle both sides, Rear Axle
• Width [mm]: 8.3
• Outer Diameter [mm]: 73
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Inner Diameter [mm]: 63
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 86
• Outer Diameter [mm]: 99
• Width [mm]: 10
• Number of Teeth: 48
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle, Front Axle both sides
• Width [mm]: 10.3
• Number of Teeth, ABS ring: 48
• Inner Diameter [mm]: 79.3
• Outer Diameter [mm]: 99
• Weight [kg]: 0.191
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 11.1998
• Construction Year to: 10.2002
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-PE-004
• Manufacturer: NTY

• Fitting Position: Front Axle both sides, Front Axle
• Number of Teeth: 48
• Outer Diameter [mm]: 99
• Inner Diameter [mm]: 86
• Width [mm]: 10
• Manufacturer: METZGER

• Construction Year to: 09.2002
• Fitting Position: Rear Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 826
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 79.3
• Outer Diameter [mm]: 99
• Thickness [mm]: 10.3
• Number of Teeth: 48
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 09.2002
• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 815
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year from: 11.2002
• Brake Type: Drum Brake
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-PE-002
• Manufacturer: NTY

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 90
• Width [mm]: 10.3
• Outer Diameter [mm]: 99
• Number of Teeth, ABS ring: 48
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: CITROEN, FIAT, LANCIA, PEU
• Additional information: CITROEN, FIAT, LANCIA, PEU

• Construction Year to: 10.2002
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-PE-001
• Manufacturer: NTY

• for RPO number up to: 09456
• Construction Year from: 10.1998
• Fitting Position: Rear Axle
• Length [mm]: 826
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 11.1998
• Construction Year to: 10.2002
• Fitting Position: Rear Axle Left, Rear Axle Right
• Connector Shape: rectangular
• Cable Length [mm]: 775
• Overall Length [mm]: 930
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 36.5
• Fabrication Number: HCA-PE-008
• Manufacturer: NTY

• Number of Teeth, ABS ring: 96
• Inner Diameter [mm]: 63
• Outer Diameter [mm]: 72.6
• Width [mm]: 8.3
• Fitting Position: Rear Axle both sides
• Manufacturer: VEMO
• Lisainfo: V22-92-0002 VEM
• Additional information: V22-92-0002 VEM

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 86
• Width [mm]: 10
• Outer Diameter [mm]: 99
• Number of Teeth, ABS ring: 48
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: FIAT, PSA
• Additional information: FIAT, PSA

• Fitting Position: Front Axle both sides, Front Axle
• Number of Teeth: 48
• Outer Diameter [mm]: 99
• Inner Diameter [mm]: 79
• Width [mm]: 10
• Manufacturer: METZGER

• Construction Year from: 11.2002
• Brake Type: Disc Brake
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-PE-000
• Manufacturer: NTY

• Construction Year to: 09.2002
• Fitting Position: Front Axle
• Cable Length [mm]: 780
• Resistor [Ohm]: 1,100
• for OE number: 4545.8
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS055

• for RPO number up to: 09456
• Fitting Position: Rear Axle
• Sensor Type: Inductive Sensor
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 11.2002
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 815
• Overall Length [mm]: 865
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 26
• Fabrication Number: HCA-PE-003
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Inductive Sensor
• Length [mm]: 825
• Number of pins: 2
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Construction Year to: 02.2009
• Fitting Position: Front Axle
• Cable Length [mm]: 815
• for OE number: 4545.F4
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS064

• Construction Year to: 10.2002
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Length [mm]: 815
• Number of pins: 2
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

Lisainfo: Sensor, wheel speed

• Construction Year from: 09.2002
• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 815
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• for RPO number up to: 9456
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 775
• Manufacturer: DELPHI
• Quality class: PJ
• Name: ABS sensor

• Fitting Position: Front Axle
• for RPO number up to: 9456
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 775
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Cable Length [mm]: 765
• Sensor Type: Passive sensor
• Number of pins: 2
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0049

• Fitting Position: Rear Axle
• Cable Length [mm]: 846
• for OE number: 4545.A3
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS065

• Cable Length [mm]: 782
• Number of pins: 2
• Sensor Type: Passive sensor
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0050

• Fitting Position: Rear Axle both sides
• Cable Length [mm]: 790
• Number of pins: 2
• Colour: grey
• Material: Plastic
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV517

• Engine Code: KFX (TU3JP)
• for RPO number up to: 09456
• Length [mm]: 815
• Number of connectors: 2
• Colour: blue
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.08
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Rear Axle Left
• Brake Type: Disc Brake
• Production number from: 9457
• Sensor Type: Active sensor
• Cable Length [mm]: 855
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• for RPO number up to: 9456
• Fitting Position: Rear Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 775
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle
• for RPO number up to: 9456
• Sensor Type: Passive sensor
• Cable Length [mm]: 775
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 63.4
• Width [mm]: 8.3
• Outer Diameter [mm]: 73
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of pins: 96
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: CITROEN, PEUGEOT
• Additional information: CITROEN, PEUGEOT

• Engine Code: KFW (TU3JP), KFX (TU3JP)
• for RPO number up to: 09456
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 885
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 09.2002
• Fitting Position: Rear Axle
• Cable Length [mm]: 780
• Resistor [Ohm]: 1,100
• for OE number: 4545.8
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI

• Engine Code: KFW (TU3JP), KFX (TU3JP)
• for RPO number up to: 07996
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 875
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: KFW (TU3JP), KFX (TU3JP)
• for RPO number from: 07997
• for RPO number up to: 09456
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 872
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for RPO number from: 9457
• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Cable Length [mm]: 846
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle
• for RPO number up to: 09456
• Cable Length [mm]: 775
• Sensor Type: Passive sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• Construction Year to: 09.2002
• for RPO number up to: 09456
• Number of pins: 2
• Connector Shape: rectangular
• Cable Length [mm]: 780
• Overall Length [mm]: 860
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 25.3
• for OE number: 4545.76
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: MEAT&DORIA

• Construction Year to: 02.2009
• Fitting Position: Rear Axle
• Cable Length [mm]: 770
• for OE number: 4545.A0
• Number of pins: 2
• Number of mounting bores: 1
• Name: MM MWSS066
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 10.1998
• Construction Year to: 08.2002
• Fitting Position: Rear
• Length [mm]: 780
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Voltage [V]: 12
• Weight [kg]: 0.12
• Colour: blue
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV097

• Production number from: 9457
• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Cable Length [mm]: 835
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• for RPO number from: 09457
• Construction Year to: 02.2009
• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 815
• Manufacturer: DENCKERMANN FILTRY

• Engine Code: KFW (TU3JP), KFX (TU3JP)
• Braking System: for vehicles with disc brakes on the rear axle
• for RPO number from: 09457
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 935
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Active sensor
• Number of pins: 2
• Cable Length [mm]: 773
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0053

• Construction Year to: 08.2002
• Fitting Position: Front
• Length [mm]: 760
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Voltage [V]: 12
• Weight [kg]: 0.12
• Colour: blue
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV095
• Manufacturer: ESEN SKV

• Construction Year to: 10.2002
• Quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 826
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Required quantity: 2
• Construction Year from: 11.1998
• Construction Year to: 10.2002
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 2
• Construction Year to: 10.2002
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• for RPO number from: 09457
• Construction Year to: 02.2009
• Required quantity: 2
• Fitting Position: Rear Axle
• Braking System: for vehicles with drum brakes on the rear axle
• Length [mm]: 846
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle
• Construction Year to: 08.2002
• Overall Length [mm]: 860
• Length [mm]: 25
• Sensor Type: Passive sensor
• Socket colour: blue
• Cable Length [mm]: 765
• paired article number: 30077
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Cable Length [mm]: 755
• Sensor Type: Active sensor
• Number of pins: 2
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0044

• Construction Year from: 09.2002
• Construction Year to: 02.2009
• Braking System: for vehicles with drum brakes on the rear axle
• Fitting Position: Rear
• Length [mm]: 780
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Voltage [V]: 12
• Weight [kg]: 0.09
• Colour: blue
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV101

• Engine Code: KFW (TU3JP), KFX (TU3JP)
• Braking System: for vehicles with drum brakes on the rear axle
• for RPO number from: 09457
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 908
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 09.2002
• Construction Year to: 02.2009
• Fitting Position: Front
• Length [mm]: 760
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Voltage [V]: 12
• Weight [kg]: 0.09
• Colour: blue
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV100

• Construction Year to: 10.2002
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 840
• Sensor Type: Passive sensor
• Weight [kg]: 0.093
• Manufacturer: TOMEX BRAKES

• Construction Year from: 10.1998
• for RPO number up to: 09456
• Required quantity: 2
• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.09
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 10.2002
• Fitting Position: Front Axle
• Required quantity: 2
• Cable Length [mm]: 826
• Fitting Depth [mm]: 25.3
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Sensor Type: Passive sensor
• Cable Length [mm]: 775
• Number of pins: 2
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0047

• Construction Year from: 10.1998
• Construction Year to: 08.2002
• Fitting Position: Rear
• Length [mm]: 780
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Voltage [V]: 12
• Weight [kg]: 0.12
• Colour: blue
• Operating Mode: Electric
• Manufacturer: ENERGY

• for RPO number from: 07997
• for RPO number up to: 09456
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 780
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Production number from: 9457
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 855
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Construction Year to: 10.2002
• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 875
• Fitting Depth [mm]: 40.5
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 890
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: KFW (TU3A), KFX (TU3JP)
• Brake Type: Drum Brake
• Block Separation:
• for RPO number from: 09457
• Fitting Position: Rear Axle
• Length [mm]: 846
• Braking/Drive Dynamics: for vehicles with ABS
• Braking System: for vehicles with drum brakes on the rear axle
• Rated Voltage [V]: 12
• Weight [kg]: 0.055
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• for RPO number from: 9457
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 835
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP