• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 18
• Transmission Type: 7-Speed Automatic Transmission
• Filter type: Filter Insert
• Lisainfo: Hydraulic Filter, automatic transmission
• Additional information: Hydraulic Filter, automatic transmission

• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• See accessories list for additionally required parts:
• Fabrication Number: FSF-ME-003
• Manufacturer: NTY
• Name: NTY FSF-ME-003

• Transmission number to: 2834526
• Transmission ID: 722.9
• Filter type: Screen Filter
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 52
• Weight [kg]: 0.361
• Manufacturer: SWAG
• Name: SW 10 92 4538

Transmission Type: 7-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission number to: 2834526
• Transmission ID: 722.9
• Filter type: Screen Filter
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 52
• Weight [kg]: 0.361
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB

Transmission Type: 7-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Suction Filter
• Transmission Type: 7-Speed Automatic Transmission
• Transmission Code: 722.9.., W7B/C/N/X, K7C
• Manufacturer: ELRING

• Transmission Type: 7-Speed Automatic Transmission
• Filter type: Filter Insert
• See accessories list for additionally required parts:
• Fabrication Number: FSF-ME-004
• Manufacturer: NTY
• Name: NTY FSF-ME-004

• Transmission number from: 2834527
• Transmission Type: 7-Speed Automatic Transmission
• Transmission ID: 722.9
• Block Separation:
• for SA code: A89
• Height [mm]: 56
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 174
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Transmission Number: 722.9...
• Construction Year to: 06.2010
• not for PR number: A89
• not for transmission code: 7-G Tronic Plus
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: without gasket/seal
• Quantity Unit: Piece
• Transmission Code: 722.9
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Transmission Number: 722.9...
• Construction Year to: 06.2010
• not for PR number: A89
• not for transmission code: 7-GTronicPlus
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: MERCEDES-BENZ
• Quantity Unit: Set
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

Transmission Code: W7X 700, W7N 700, W7B 700, K7C 1000, W7C 700, W7C 1000, 722.9

• Transmission Type: 7-Speed Automatic Transmission
• Transmission Code: 722.9.., W7B/C/N/X, K7C
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: ELRING
• Additional information: 097.550 ELRING
• Lisainfo: 097.550 ELRING

• Transmission Code: 722.908/965/966, 7G-Tronic
• Filtritüüp: Imifilter
• Pikkus (mm): 267
• Siseläbimõõt [mm]: 21
• Laius (mm): 174
• Kõrgus (mm): 18
• Manufacturer: DENCKERMANN FILTRY

• Transmission Type: 7-Speed Automatic Transmission
• Length [mm]: 268
• Width [mm]: 175
• Height [mm]: 58
• Weight [kg]: 0.495
• Supplementary Article/Info 2: with oil sump gasket
• Name: OSADE KOMPLEKT, OLIVAHETUS- AUTOMAATKŽIGUKAST
• Manufacturer: FEB

Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Number: 722.965
• Filtritüüp: Filtrer
• Laius (mm): 174
• Kõrgus (mm): 54
• Siseläbimõõt [mm]: 24
• Käigukasti liik: automaatkast 7 käiku
• Tihendiliik: Pehme-tihend
• Piirangutega toode/piirangu info: koos tihendiga
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Type: 7-Speed Automatic Transmission
• Length [mm]: 268
• Width [mm]: 175
• Height [mm]: 58
• Weight [kg]: 0.495
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: BLP

Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 7-Speed Automatic Transmission
• Length [mm]: 268
• Width [mm]: 175
• Height [mm]: 58
• Weight [kg]: 0.495
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: SWAG
• Name: SW 10 93 0157

Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Width 1 [mm]: 267
• Width 2 [mm]: 174
• Height [mm]: 58
• Transmission Code: 722,9
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: ALC

• Filter type: Screen Filter
• Seal Material: ACM (Polyacrylate)
• Weight [kg]: 0.438
• Supplementary Article/Info 2: with oil sump gasket
• Name: OSADE KOMPLEKT, OLIVAHETUS- AUTOMAATKŽIGUKAST
• Manufacturer: FEB
• Lisainfo: 44530 FEBI
• Additional information: 44530 FEBI

Transmission Type: 7-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Number: 722.9...
• Construction Year to: 06.2010
• not for PR number: A89
• not for transmission code: 7-G Tronic Plus
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: MERCEDES-BENZ
• Quantity Unit: Set
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY
• Lisainfo: 0140370000
• Additional information: 0140370000

Transmission Code: 722.9, W7C 1000, W7C 700, K7C 1000, W7B 700, W7N 700, W7X 700

• Parameter: DP1110.14.0008
• Weight [kg]: 0.5
• Filter type: Screen Filter
• Manufacturer: DRIVE

• Filter type: Screen Filter
• Seal Material: ACM (Polyacrylate)
• Supplementary Article/Info 2: with oil sump gasket
• Name: SW 10 94 4530
• Manufacturer: SWAG

Transmission Type: 7-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Käigukasti liik: 7-käigulise automaatk.kasti jaoks
• Piirangutega toode/piirangu info: koos tihendiga
• Materjal: Kumm
• Kastitüüp: 722.900-999
• OE-numbri jaoks: A 221 277 02 00
• soovitava lisavarustuse artiklinumber: 8029033
• Manufacturer: METZGER

• Transmission number from: 2834527
• Transmission Type: 7-Speed Automatic Transmission
• Transmission ID: 722.9
• Block Separation:
• for SA code: A89
• Pikkus (mm): 267
• Laius (mm): 174
• Kõrgus (mm): 56
• Kaal (kg): 0,696
• Piirangutega toode/piirangu info 2: õlivannitihendiga
• OE-numbri jaoks: 222 277 20 00 S1
• Manufacturer: DENCKERMANN FILTRY

• Filtritüüp: Filtrer
• Kastitüüp: 722,9, 7G-Tronic
• Käigukasti liik: automaatkast 7 käiku
• Piirangutega toode/piirangu info: koos lisadega, koos tihendiga, koos juhtpoldiga
• Piirangutega toode/piirangu info 2: koos poltidega
• Quality class: PJ
• Name: Automatic transmission filter

Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999

• Transmission ID: 722.965
• Production date from: 21.06.2010
• Specification: MB236.15
• Filtritüüp: Filtrer
• Kastitüüp: 722,9, 7G-Tronic Plus
• Käigukasti liik: automaatkast 7 käiku
• Piirangutega toode/piirangu info: koos lisadega, koos tihendiga, ilma juhtpoldita
• Piirangutega toode/piirangu info 2: ilma mutrita
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Type: Manual-/optional automatic transmission
• Manufacturer: HENGST FILTER
• Lisainfo: EG841H D449
• Additional information: EG841H D449

• Transmission Code: 7G-Tronic, 722,9
• See accessories list for additionally required parts:
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.809
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: for 7-speed automatic transmission, 7-Speed Automatic Transmission Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission number from: 2834527
• Transmission Type: 7-Speed Automatic Transmission
• Transmission ID: 722.9
• Block Separation:
• for SA code: A89
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 56
• Weight [kg]: 0.356
• Supplementary Article/Info 2: with oil sump gasket
• Name: SW 10 10 7823
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission number from: 2834527
• Transmission Type: 7-Speed Automatic Transmission
• Transmission ID: 722.9
• Block Separation:
• for SA code: A89
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 56
• Weight [kg]: 0.356
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: 722.908/965/966, 7G-Tronic
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 18
• Inner Diameter [mm]: 21
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN

• Filter type: Screen Filter
• Seal Material: ACM (Polyacrylate)
• Supplementary Article/Info 2: with bolts/screws, with oil sump gasket
• Weight [kg]: 0.474
• Transmission Type: for automatic transmission
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filtritüüp: Filtrer
• Kastitüüp: 722.9 ECO
• Käigukasti liik: automaatkast 7 käiku
• Piirangutega toode/piirangu info: koos tihendiga
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission ID: 722.965
• Production date from: 21.06.2010
• for PR number: A89
• Transmission Code: 722,9, 7G-Tronic Plus
• Transmission Type: 7-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Weight [kg]: 0.556
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Hulgaühik: Komplekt
• Käigukasti liik: automaatkast 7 käiku
• Piirangutega toode/piirangu info: koos lisadega
• Kastitüüp: 722.9 ECO
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Number: 722.965
• Production date from: 21.06.2010
• Specification: MB236.15
• for PR number: A89
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: MERCEDES-BENZ
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Quality: OE-SPECIFICATION
• Additive Version: Reduced Friction
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MEY

Transmission Code: W7X 700, W7C 1000, 722.9, 7G-TRONIC +, K7C 1000, K7X 1000, W7B 700, W7C 700, W7N 700 General Information: MEYLE Hydraulic filter complies with the OEM specification Smart-Media™-Triple.

• Transmission ID: 722.965
• Production date from: 21.06.2010
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal, with accessories
• for PR number: A89
• Transmission Code: 722,9, 7G-Tronic Plus
• Supplementary Article/Info 2: with bolts/screws
• See accessories list for additionally required parts:
• Weight [kg]: 0.731
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.