• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Thread Size: M14 x 1,5
• Spanner Size: 19
• Lisainfo: Coolant Temperature Sensor
• Additional information: Coolant Temperature Sensor

• Number of pins: 2
• Fitted Diameter [mm]: 9
• Supplementary Article/Info 2: with seal ring
• for OE number: K05175764AA
• Manufacturer: KAMOKA

• Fabrication Number: ECT-ME-002
• Manufacturer: NTY
• Name: NTY ECT-ME-002

• Spanner Size: 19
• for OE number: K05103534AA
• Manufacturer: KAMOKA

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Spanner Size: 19
• Number of pins: 2
• Thread Size: M14 x 1,5
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: MAX

• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0292
• Additional information: 21-0292

• Supplementary Article/Info 2: with seal ring
• for OE number: 000 905 61 02
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5175764AA
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: FAST

Manufacturer: FAST

• Engine Code: OM 651.912
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Housing Colour: black
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE TS10531

• for OE number: 003 153 28 28
• Fabrication Number: ECP-CH-020
• Manufacturer: NTY

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Manufacturer: SKV GERMANY

Manufacturer: FAST

• Thread Size: 9 mm
• Number of connectors: 2
• Manufacturer: VERNET

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• for OE number: 000 905 61 02
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Passive sensor
• for OE number: 05080352AA
• Manufacturer: KAMOKA

• Thread Size: 9 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• for OE number: 000 905 61 02
• Manufacturer: SWAG
• Name: SW 10 94 5443

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: OM 651.912
• for article number: 1.880.776, 1.880.875
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Mounting Type: Clamped
• Manufacturer: HELLA
• Name: HE 6PT358058191

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M14 x 1,5
• Manufacturer: ERA

• Height [mm]: 50.6
• Weight [kg]: 0.027
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 52
• Outer Diameter [mm]: 10
• Number of connectors: 2
• Weight [kg]: 0.005
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Block Separation:
• Country Specific Design: USA, Canada
• Vehicle Equipment: for vehicles with start-stop function
• Number of pins: 2
• Operating Mode: Mechanical
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6DD010966431

Transmission Type: not for 5-speed automatic transmission, not for 7-speed automatic transmission

• Engine Code: OM 651.912
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Thickness [mm]: 51
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 51
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Manufacturer: SWAG
• Name: SW 10 93 7059

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Equipment: for vehicles without start-stop function
• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAU KORB. DB A KLASA W168 1,4 97-

• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Fabrication Number: ECP-ME-008
• Manufacturer: NTY

• Engine Code: OM 651.912
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: MEYLE

• Fabrication Number: ECP-ME-006
• Number of pins: 3
• Manufacturer: NTY

• for OE number: 003 153 8628
• Manufacturer: TRUCKTEC

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Vehicle Equipment: for vehicles without start-stop function
• Sensor Type: Inductive Sensor
• Number of pins: 2

• Number of pins: 2
• Connector Shape: D Shape
• Sensor Type: Inductive Sensor
• Resistor [Ohm]: 1,080
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Transmission Type: Automatic Transmission
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Name: DE SS12309-12B1
• Manufacturer: DELPHI

• Vehicle Equipment: for vehicles with start-stop function
• Number of pins: 3
• Name: DE SS12020-12B1
• Manufacturer: DELPHI

• Fitting Position: Flywheel side
• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Supplementary Article/Info 2: for crankshaft, without cable
• Required quantity: 1
• Resistor [Ohm]: 680
• Alternatively:
• Colour: black
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 40
• Connector Shape: D Shape
• Number of mounting bores: 1
• Weight [kg]: 0.029
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 40
• Alternatively:
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550275
• Resistor [kOhm]: 1
• Manufacturer: ERA

• Colour: black
• Sensor Type: Passive sensor, Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Required quantity: 1
• Mounting Type: Bolted
• Manufacturer: FAST

• Fitting Position: Right
• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 2
• Manufacturer: VERNET

• Length [mm]: 76
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Vehicle Equipment: for vehicles with start-stop function
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAU DB A KLASA 2,1 15-
• Manufacturer: BRM

• Length [mm]: 75.7
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Name: SW 10 92 4455
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Name: Andur, v„ntvoll
• Manufacturer: MAG

• Vehicle Equipment: for vehicles without start-stop function
• Number of mounting bores: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Product must be determined on the vehicle or the motor:
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Transmission Type: Manual Transmission
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550328
• Manufacturer: ERA

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603

Manufacturer: FAST

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• for OE number: 003 153 27 28
• Number of pins: 2
• Manufacturer: FAE

• Engine Code: 651.912
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 1,150
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 254008

• for OE number: A 651 090 01 48
• Length [mm]: 100
• Housing Type: with housing
• Number of pins: 4
• Connector Shape: oval
• Used part return not required:
• Fabrication Number: EPP-ME-016
• Manufacturer: NTY

• Fabrication Number: EPP-ME-011
• Manufacturer: NTY

• for OE number: 003 153 27 28
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Number of connectors: 3
• Weight [kg]: 0.018
• Name: Andur, v„ntvoll
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 651.912
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.02
• Manufacturer: VALEO

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• for OE number: A 651 090 02 48
• Length [mm]: 100
• Housing Type: with housing
• Number of pins: 4
• Connector Shape: oval
• Used part return not required:
• Fabrication Number: EPP-ME-003
• Manufacturer: NTY

• Vehicle Equipment: for vehicles without start-stop function
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 07SKV187

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: A 276 905 07 00
• Quality: OE EQUIVALENT
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: OM 651.912
• not for country specific design: USA, Canada
• Vehicle Equipment: for vehicles with start-stop function
• Housing Type: with housing
• Length [mm]: 100
• Inner Diameter [mm]: 82
• Outer Diameter [mm]: 82
• Name: Ohuhulgamootja
• Manufacturer: EPS

• Fabrication Number: EPP-ME-017
• Manufacturer: NTY

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: before catalytic converter
• Vehicle Equipment: for vehicles without start-stop function
• Cable Length [mm]: 630
• Name: DE ES21131-12B1
• Manufacturer: DELPHI

• Vehicle Equipment: for vehicles without start-stop function
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 600
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Warranty: 3 years warranty
• Name: CE 07SKV192
• Manufacturer: ESEN SKV

• Engine Code: OM 651.912
• Fitting Position: before catalytic converter
• Vehicle Equipment: for vehicles without start-stop function
• Cable Length [mm]: 650
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.475
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Vehicle Equipment: for vehicles without start-stop function
• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10676-12B1
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Fitting Position: before catalytic converter
• Vehicle Equipment: for vehicles with start-stop function
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Vehicle Equipment: for vehicles without start-stop function
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Manufacturer: BREMI

• Vehicle Equipment: for vehicles without start-stop function
• Mounting Type: Pipe-neck
• Number of pins: 4
• Pipe socket mounting diameter [mm]: 82
• Supplementary Article/Supplementary Info: without gasket/seal
• for SA code: MA5 = Euro 5a
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET358095311

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2011
• Vehicle Equipment: for vehicles with start-stop function
• Resistor Type: Hot-wire Sensor
• Number of connectors: 4
• Weight [kg]: 0.18
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Equipment: for vehicles with start-stop function
• Number of circuits: 5
• Overall Length [mm]: 740
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Vehicle Equipment: for vehicles without start-stop function
• Resistor Type: Hot-film Sensor
• Number of connectors: 4
• Weight [kg]: 0.194
• for OE number: 651 090 01 48
• Housing Type: with housing
• Name: Ohumassimootja
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.