• Construction Year from: 04.2005
• for OE number: 0045420718, 35428218
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2044

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)"

• Fabrication Number: ECT-ME-004
• Name: NTY ECT-ME-004
• Manufacturer: NTY

• Engine Code: M 266.940
• Name: EP 1.994.014
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Connector Shape: oval
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: 15 mm
• Manufacturer: CALORSTAT BY VERNET

• for OE number: 005 153 50 28, 2E0 906 051 A
• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Fabrication Number: ECM-ME-000

• Engine Code: M 266.940
• for article number: 1.880.776, 1.880.875
• Name: EP 1.830.343
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-ME-000

• Construction Year to: 04.2009
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

Fabrication Number: ESS-ME-000

• Required quantity: 1
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Colour: black
• Sensor Type: NTC Sensor
• Manufacturer: FAE

Fabrication Number: ECP-ME-003

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Version: 2
• Number of pins: 3
• Pressure from [kPA]: 10
• Manufacturer: DELPHI
• Name: DE PS20068-12B1

• Construction Year to: 04.2009
• Manufacturer: BOSCH

Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

Manufacturer: MAGNETI MARELLI

• Alternatively:
• Number of pins: 3
• Pressure from [kPA]: 10
• Manufacturer: DELPHI
• Name: DE PS10140

• Required quantity: 1
• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 120
• Measuring Range from [V]: 0.5
• Measuring Range to [V]: 4.5
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Pressure from [kPA]: 21
• Manufacturer: DELPHI
• Name: DE PS10136

• Construction Year to: 04.2009
• Manufacturer: BOSCH
• Name: BS 0261230189

• Engine Code: M 266.940
• Required quantity: 1
• Name: EP 1.953.387
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Quantity: 1
• Alternatively:
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11033

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: M 266.940
• alternative OE number: 0061539728
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Output Voltage, from [V]: 0.503
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.106
• Manufacturer: EPS

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Length [mm]: 330
• Fabrication Number: ESL-ME-001

• Construction Year to: 04.2009
• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.2
• Supplementary Article/Info 2: with seal ring, without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11151

• Length [mm]: 35
• Width [mm]: 48.5
• Thickness [mm]: 43
• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 005 153 50 28
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 04.2009
• Manufacturer: BOSCH
• Name: BS 0232103114

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Colour Coding: grey
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Name: SW 10 93 8292
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 9
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 320
• Cable Length [mm]: 320
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM118

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe, Regulating Probe, Heated
• Construction Year to: 04.2005
• Voltage [V]: 12
• Length [mm]: 425
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV679
• Manufacturer: ESEN SKV

Exhaust System: after catalytic converter, before catalytic converter

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Construction Year to: 04.2005
• Engine Code: M 266.940
• Voltage [V]: 12
• Length [mm]: 300
• Number of circuits: 4
• Weight [kg]: 0.99
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV064
• Manufacturer: ESEN SKV

• Construction Year from: 05.2005
• Vehicle Identification Number (VIN) from: J151311
• Block Separation:
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 325
• Manufacturer: DELPHI
• Name: DE ES20521-12B1

Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Fitting Position: before catalytic converter, after catalytic converter

• Required quantity: 1
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009121591
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M 266.940
• Vehicle Identification Number (VIN) to: J151310
• Length [mm]: 300
• Block Separation:
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.202
• Manufacturer: EPS

Fitting Position: before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year from: 05.2005
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 490
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV700
• Manufacturer: ESEN SKV

• Construction Year to: 04.2005
• Vehicle Identification Number (VIN) to: J151310
• Block Separation:
• Cable Length [mm]: 315
• Manufacturer: DELPHI

Lambda Sensor: Diagnostic Probe, Regulating Probe, Planar probe, Heated Fitting Position: after catalytic converter, before catalytic converter

• Construction Year to: 04.2009
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Identification Number (VIN) from: J 151311
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 04.2005
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 04.2009
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Identification Number (VIN) from: J 151311
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 330
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258006749

Fitting Position: before catalytic converter, after catalytic converter