• Construction Year from: 04.2005
• for OE number: 0045420718, 35428218
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2044

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)"

• Fabrication Number: ECT-ME-004
• Name: NTY ECT-ME-004
• Manufacturer: NTY

• Pressure [bar]: 0.5
• Housing Colour: black
• Thread Size: M12*1.5
• Spanner Size: 0
• Number of pins: 1
• Name: DE SW90056
• Manufacturer: DELPHI

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5175764AA
• Manufacturer: NRF

Manufacturer: FAST

• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M 266.940
• Name: EP 1.994.014
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Connector Shape: oval
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Colour: black
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE TS10531

• Thread Size: M 12x1,5
• Housing Colour: black
• Manufacturer: FAE

Fabrication Number: ECP-ME-001

• for OE number: 003 153 28 28
• Fabrication Number: ECP-CH-020

• Construction Year to: 04.2009
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Component Number: 120-04-027
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Number to: 30002486
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.034
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: FAST

• Thread Size: 15 mm
• Manufacturer: CALORSTAT BY VERNET

• Thread Size: 9 mm
• Number of connectors: 2
• Manufacturer: VERNET

• Thread Size: 9 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 003 153 27 28
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• for OE number: 000 905 61 02
• Manufacturer: SWAG
• Name: SW 10 94 5443

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 266.940
• for article number: 1.880.776, 1.880.875
• Name: EP 1.830.343
• Manufacturer: EPS

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• for OE number: 000 905 61 02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Mounting Type: Clamped
• Manufacturer: HELLA
• Name: HE 6PT358058191

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-ME-000

• Construction Year to: 04.2009
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Block Separation:
• Vehicle Main Current: for vehicles with 48V main current
• Number of pins: 2
• Operating Mode: Mechanical
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6DD010966431

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission

Fabrication Number: ESS-ME-000

• Number of pins: 2
• Manufacturer: FAE

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Required quantity: 1
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Colour: black
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV330
• Manufacturer: ESEN SKV

Fabrication Number: ECP-ME-003

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Engine Code: M 266.940
• Name: EP 1.953.578
• Manufacturer: EPS

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Number of pins: 2
• Connector Shape: D Shape
• Sensor Type: Inductive Sensor
• Resistor [Ohm]: 1,080
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Sensor Type: Inductive Sensor
• Number of pins: 2

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS10925

• Construction Year to: 04.2009
• Manufacturer: BOSCH

• Length [mm]: 40
• Alternatively:
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550275
• Resistor [kOhm]: 1
• Manufacturer: ERA

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Colour: black
• Sensor Type: Passive sensor, Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Required quantity: 1
• Mounting Type: Bolted
• Manufacturer: FAST

Manufacturer: MAGNETI MARELLI

• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 2
• Manufacturer: VERNET

• Length [mm]: 75.7
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Name: SW 10 92 4455
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of mounting bores: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009110851

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 76
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Manufacturer: FAE

• Engine Code: M 266.940
• Required quantity: 1
• Name: EP 1.953.387
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Construction Year to: 04.2009
• Manufacturer: BOSCH
• Name: BS 0261210170

• Quantity: 1
• Alternatively:
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11033

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Length [mm]: 330
• Fabrication Number: ESL-ME-001

• Construction Year to: 04.2009
• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.2
• Supplementary Article/Info 2: with seal ring, without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 03.2008
• Engine Code: 266.940
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 1,150
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 254008

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11151

• Construction Year to: 04.2009
• Manufacturer: BOSCH
• Name: BS 0232103114

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Colour Coding: grey
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Name: SW 10 93 8292
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 9
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 320
• Cable Length [mm]: 320
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM118

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe, Regulating Probe, Heated
• Construction Year to: 04.2005
• Voltage [V]: 12
• Length [mm]: 425
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV679
• Manufacturer: ESEN SKV

Exhaust System: after catalytic converter, before catalytic converter

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Construction Year to: 04.2005
• Engine Code: M 266.940
• Voltage [V]: 12
• Length [mm]: 300
• Number of circuits: 4
• Weight [kg]: 0.99
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV064
• Manufacturer: ESEN SKV

• Construction Year from: 05.2005
• Vehicle Identification Number (VIN) from: J151311
• Block Separation:
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 325
• Manufacturer: DELPHI
• Name: DE ES20521-12B1

Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Fitting Position: before catalytic converter, after catalytic converter

• Required quantity: 1
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009121591
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M 266.940
• Vehicle Identification Number (VIN) to: J151310
• Length [mm]: 300
• Block Separation:
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.202
• Manufacturer: EPS

Fitting Position: before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year from: 05.2005
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 490
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV700
• Manufacturer: ESEN SKV

• Construction Year to: 04.2005
• Vehicle Identification Number (VIN) to: J151310
• Block Separation:
• Cable Length [mm]: 315
• Manufacturer: DELPHI

Lambda Sensor: Diagnostic Probe, Regulating Probe, Planar probe, Heated Fitting Position: after catalytic converter, before catalytic converter

• Lambda Sensor: Diagnostic Probe
• Vehicle Identification Number (VIN) from: J 151311
• Construction Year to: 04.2009
• Fitting Position: after catalytic converter
• Length [mm]: 310
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year to: 04.2009
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Identification Number (VIN) from: J 151311
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 04.2005
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 04.2009
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Identification Number (VIN) from: J 151311
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 330
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258006749

Fitting Position: before catalytic converter, after catalytic converter