• Fitting Position: Front Axle Left, Front Axle Right, Lower, outer
• Manufacturer: JP GROUP
• Lisainfo: Ball joint for wishbone, lower
• Additional information: Ball joint for wishbone, lower

• Thickness [mm]: 15.5
• Outer Diameter [mm]: 29
• Internal Thread Size: M14 x 1,5
• Quality/ Grade: 10
• Spanner Size: 21
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zink flake coated
• Weight [kg]: 0.029
• Name: NUT, LAAGER / JUHEND HINGE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• External Thread [mm]: M14x1,5
• Manufacturer: MERTZ

• Construction Year to: 08.2002
• Fitting Position: Front Axle, Lower, inner
• Thread Size: M14x1,5

• Observe service information:
• Fabrication Number: ZSD-ME-003

Fitting Position: Front Axle, Lower, outer, Front Axle Left, Front Axle Right

• Fitting Position: Front Axle, Lower
• Cone Size [mm]: 18
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Lower, inner
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• External Thread [mm]: M14x1,5
• Cone Size [mm]: 17.1
• Manufacturer: MERTZ

• Fitting Position: Front Axle
• Cone Pitch: 1/10
• Cone Size [mm]: 17
• Outer Diameter [mm]: 41.3
• Thread Size 1: MM14X1.5R
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle, Lower
• Cone Size [mm]: 17
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right, outer, Lower
• Diameter [mm]: 41.4
• Thread Size 1: M14X1.5 RHT
• Cone Size [mm]: 17
• paired article number: 220379
• Weight [kg]: 0.461
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Drive Type: Rear-Wheel Drive
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Diameter [mm]: 41
• Thread Size 1: MM14X1,5R
• Cone Size [mm]: 17
• Name: Control arm ball joint left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, outer, Lower
• Thread Size: M14x1,5
• Net weight [kg]: 0.46
• Name: Liigend - K„„ndmik DB P. W211/220
• Manufacturer: NK

• Fitting Position: Front Axle, Rear Axle
• Special Purpose Vehicle: for armoured vehicles, also for armoured vehicles
• Block Separation:
• Bore Ø [mm]: 14.1
• Diameter [mm]: 40.1
• Width [mm]: 48
• SVHC: No SVHC present!
• Name: Kande-/juhtliigend
• Manufacturer: FAG

• Fitting Position: Front Axle, Upper
• Width [mm]: 51
• Height [mm]: 51
• Weight [kg]: 0.461
• Material: Steel
• Thread Size 1: M14x1,5
• Max. Length [mm]: 91
• Name: Control arm ball joint left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MERCEDES W220, 98-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MERCEDES W220, 98-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, Lower, outer
• Supplementary Article/Info 2: with nut
• Thread Size: M14x1,5
• Diameter [mm]: 51
• Name: Liigend - K„„ndmik DB P. W211/220 LE/PR DOLNY
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with accessories
• Length [mm]: 70.5
• Thread Size: M14x1,5
• Cone Size [mm]: 18
• Fitting Position: Front Axle, Lower, both sides, inner
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• for SA code: -487, Z07
• Fitting Position: Lower Front Axle
• Weight [kg]: 0.25
• Packaging length [cm]: 7
• Packaging width [cm]: 3.7
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower
• Manufacturer: MAX

Name: Liigend - K„„ndmik P. DB W211/220 DOLNEGO LE/PR WEW.

• Fitting Position: Front Axle, Lower
• Diameter [mm]: 41
• Thread Size 2: M14x1.5
• Weight [kg]: 0.43
• Name: DY 27-01004
• Manufacturer: DYS

• External Thread Size: M14 x 1,5
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Weight [kg]: 0.195
• Name: Liigend - K„„ndmik DB W211/220 DOLNEGO LE/PR WEW.
• Manufacturer: FEB

for OE number: 211 330 81 07, 211 330 82 07, 211 330 91 07, 211 330 92 07, 220 330 89 07, 220 330 90 07, 230 330 13 07, 230 330 14 07, 230 330 33 07, 230 330 34 07 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear, inner, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 318003
• Manufacturer: SKF
• Name: SK VKDS318003

• Fitting Position: Front Axle Right, Front Axle Left, Lower, inner
• Manufacturer: CORTECO
• Name: COC 49395876

• Fitting Position: Front Axle, inner, Lower
• Thread Size: M14x1.5
• Length [mm]: 38
• Width [mm]: 38
• Height [mm]: 74
• Manufacturer: DELPHI
• Name: DE TC2254

• Fitting Position: inner, Front Axle, Lower
• Name: Kande-/juhtliigend
• Manufacturer: TRI
• Lisainfo: MERCEDES 211/219/220
• Additional information: MERCEDES 211/219/220

• Fitting Position: Front Axle both sides
• Thread Size: M14 x 1,5
• Name: ALT 81895AL
• Manufacturer: ALTE AUTOMOTIVE

• Vehicle type: 220.178
• Fitting Position: Front Axle, Lower, outer
• Thread Size: M14x1,5
• Diameter [mm]: 51
• Name: Liigend - K„„ndmik DB P. W211/220 LE/PR DOLNY
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Cone Size [mm]: 17.2, 19.5
• Thread Size: M14 x 1.5
• External Thread [mm]: 41.3
• Name: ALT 81203AL
• Manufacturer: ALTE AUTOMOTIVE

• Construction Year to: 08.2002
• Weight [kg]: 0.3
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

Fitting Position: Front Axle, Front Axle Left, Front Axle Right, inner, Lower

• Fitting Position: Rear Axle Lower, outer
• Length [mm]: 48
• Diameter [mm]: 14.1
• Outer Diameter [mm]: 40
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower, outer
• Observe service information:
• Manufacturer: QUARO

Name: Liigend - K„„ndmik P. DB W211/220 DOLNEGO LE/PR WEW.

• External Thread Size: M14 x 1,5
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Weight [kg]: 0.195
• Manufacturer: SWAG
• Name: SW 10 92 7066

for OE number: 211 330 81 07, 211 330 82 07, 211 330 91 07, 211 330 92 07, 220 330 89 07, 220 330 90 07, 230 330 13 07, 230 330 14 07, 230 330 33 07, 230 330 34 07 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, outer, Rear Axle
• Supplementary Article/Supplementary Info: with accessories
• Thread Size: M14x1.5
• Cone Size [mm]: 17.5
• Cone Pitch: 1:10
• Manufacturer: TRW
• Additional information: JBJ697 TRW
• Lisainfo: JBJ697 TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right, Front Axle Left, inner
• Diameter [mm]: 34.3
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Construction Year to: 08.2002
• Fitting Position: inner, Lower, Front Axle Left, Front Axle Right
• Thread Size: M14x1,5
• replacement in pairs recommended:
• Required quantity: 2
• Name: KANDE-/JUHTLIIGEND
• Manufacturer: MEY

• External Thread Size: M14 x 1,5
• Cone Size [mm]: 17.1
• Control/Trailing Arm Type: for control arm
• Fitting Position: Lower Front Axle, Lower
• Weight [kg]: 0.424
• Supplementary Article/Info 2: with self-locking nut
• Name: Liigend - K„„ndmik DB P. W211/220
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides, Lower
• Outer Diameter [mm]: 41
• External Thread 2 [mm]: M14x1,5
• Weight [kg]: 0.432
• Manufacturer: RTS

• Fitting Position: Front Axle, outer, Lower
• Thread Size: M14x1.5
• Length [mm]: 51
• Width [mm]: 51
• Height [mm]: 95
• Manufacturer: DELPHI
• Name: DE TC1382

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Kande-/juhtliigend
• Manufacturer: FAG

• Construction Year to: 08.2002
• Weight [kg]: 0.5
• Required quantity: 2
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

Fitting Position: Front Axle, Front Axle Left, Front Axle Right, outer, Lower

• Fitting Position: Front Axle both sides, Lower, inner
• Weight [kg]: 0.252
• Outer Diameter 1 [mm]: 34.35
• External Thread 2 [mm]: M14x1,5
• Manufacturer: RTS

• Fitting Position: Rear Axle
• Length [mm]: 48
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 14.1
• Material: Steel
• Name: Paigutus - K„„ndmik DB T. WAHLIWA
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, both sides, Rear, Lower, outer
• Article number of recommended accessories: 39447 01
• Observe service information:
• Name: Liigend - K„„ndmik DB W211/220 DOLNEGO LE/PR WEW.
• Manufacturer: LMI
• Lisainfo: 21667 02 LEM
• Additional information: 21667 02 LEM

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower, inner
• Thread Size: M14x1,5
• Mounting Type: Pressed
• Diameter [mm]: 34.2
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with nut
• Manufacturer: AIC
• Additional information: 53341 NRF
• Lisainfo: 53341 NRF

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• External Thread Size: M14 x 1,5
• Cone Size [mm]: 17.1
• Control/Trailing Arm Type: for control arm
• Fitting Position: Lower Front Axle, Lower
• Weight [kg]: 0.424
• Supplementary Article/Info 2: with self-locking nut
• Manufacturer: SWAG
• Name: SW 10 92 3417

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: outer, Lower, Front Axle Left, Front Axle Right
• Thread Size: M14x1,5
• Outer Diameter [mm]: 41
• Height [mm]: 91.8
• Cone Size [mm]: 17.3
• Supplementary Article/Supplementary Info: with accessories
• replacement in pairs recommended:
• Required quantity: 2
• Name: Liigend - K„„ndmik DB P. W211/220
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: outer, Lower, Front Axle Left, Front Axle Right
• Thread Size: M14x1,5
• Outer Diameter [mm]: 41
• Height [mm]: 91.8
• Cone Size [mm]: 17.3
• Supplementary Article/Supplementary Info: with accessories
• reinforced version:
• replacement in pairs recommended:
• with environmental seal: Carbon neutral
• Required quantity: 2
• Name: Liigend - K„„ndmik DB P. W211/220 HD
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Vehicle type: 220.178
• Fitting Position: Front Axle, Lower, both sides, outer
• Supplementary Article/Info 2: with fastening material
• Thread Size: M14x1,5
• Diameter [mm]: 51
• Name: Liigend - K„„ndmik DB P. W211/220
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Lower, both sides
• Length [mm]: 48
• Outer Diameter [mm]: 40
• Supplementary Article/Supplementary Info: with accessories
• Material: Stainless Steel
• Name: KANDE-/JUHTLIIGEND
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Lower, outer
• Special Purpose Vehicle: not for armoured vehicles
• Supplementary Article/Supplementary Info: with accessories
• Cone Size [mm]: 40
• Length [mm]: 48
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!