Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation - Length [mm]: 650
- Connector Shape: round
- Conductor Number: 4
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 650
- Number of circuits: 4
- Weight [kg]: 0.11
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Regulating Probe,
Diagnostic Probe, Heated - Block Separation:
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles Fitting Position: before catalytic converter, after catalytic converter
- Lambda Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Pinge [V]: 12
- Pikkus (mm): 480
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
1 - Rakendustüüp: elektriline
- Garantii: 3 aastat garantii
- Manufacturer: SKV GERMANY
- Name: CE 09SKV057
- Lambda Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 830
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
11 - Rakendustüüp: elektriline
- Garantii: 3 aastat garantii
- Manufacturer: SKV GERMANY
-
Lambda Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 400
- Weight [kg]: 0.082
- Name: SW 33 10 3189
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 4
- Connector Shape: round
-
Thread Size: M18 x 1,
5 - Length [mm]: 550
- Cable Length [mm]: 570
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles -
Lambda Sensor: Regulating Probe,
Thread pre- greased - Number of circuits: 4
- Weight [kg]: 0.15
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Regulating Probe,
Heated, Thread pre- greased - Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation - Length [mm]: 720
- Connector Shape: round
- Number of pins: 4
- Weight [kg]: 0.117
- for OE number: 002 540 08 17
- Socket colour: black
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 720
- Number of circuits: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 660
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
14 - Takistus [oom]: 9
- Rakendustüüp: elektriline
- Garantii: 3 aastat garantii
- Manufacturer: SKV GERMANY
- Name: CE 09SKV643
- Resistor [Ohm]: 9
- Length [mm]: 900
- Conductor Number: 4
- Number of circuits: 4
- Cable Length [mm]: 900
- Lambda Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Thread Size: M18 x 1,
5 - Conductor Number: 4
- Connector Shape: round
- Length [mm]: 880
- Cable Length [mm]: 870
- Number of circuits: 4
- Weight [kg]: 0.15
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: M 111.982
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Left Front,
before catalytic converter -
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Lambda Sensor: Regulating Probe,
Planar probe, Heated - Block Separation:
-
Exhaust System: for pre-
catalytic converter - Cable Length [mm]: 919
- Manufacturer: DELPHI
-
Name: DE ES20174-
12B1
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Engine Code: M 111.982
- Cable Length [mm]: 380
- Name: LAMBDA ANDUR
- Manufacturer: DLP
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150
Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Lambda Sensor: Regulating Probe,
Diagnostic Probe - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: before catalytic converter, after catalytic converter Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles
-
Fitting Position: Right Front,
before catalytic converter -
Left-/right-hand drive vehicles: for right-
hand drive vehicles -
Lambda Sensor: Regulating Probe,
Planar probe, Heated - Block Separation:
- Engine Code: M 111.982
- Cable Length [mm]: 470
- Name: LAMBDA ANDUR
- Manufacturer: DLP
Additional information: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)"
-
Lambda Sensor: Diagnostic Probe,
Regulating Probe - Length [mm]: 470
- Number of connectors: 4
- Manufacturer: VERNET
Exhaust System: after catalytic converter, before catalytic converter
- Engine Code: M 111.982
- Fitting Position: after catalytic converter
- Lambda Sensor: Diagnostic Probe
- Kaablipikkus (mm): 400
- Ühendushulk: 4
-
Lambda andur: soojendatud,
Titaanandur, Keere eelmääritud - ka universaaltootena saadav vaata toode-nr.: 1.998.240
- Ülekandeliinide arv: 4
- Name: LAMBDA ANDUR
- Manufacturer: EPS
- Fitting Position: after catalytic converter
- Lambda Sensor: Planar probe
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 400
- Number of pins: 4
- Name: Lambda andur
- Manufacturer: MEY
-
for OE number: 0015407417,
15400717 -
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 900
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 136
- Manufacturer: DENSO
Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
KLASA E (W211), 03.0
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
KLASA E (W211), 03.0
(kvaliteediklass: Q)"
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles - Number of circuits: 4
- Overall Length [mm]: 450
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Engine Code: M 111.982
-
Fitting Position: Right Front,
before catalytic converter -
Left-/right-hand drive vehicles: for right-
hand drive vehicles - Lambda Sensor: Regulating Probe
- Kaablipikkus (mm): 450
- Ühendushulk: 4
-
Lambda andur: soojendatud,
Titaanandur, Keere eelmääritud - ka universaaltootena saadav vaata toode-nr.: 1.998.240
- Ülekandeliinide arv: 4
- Name: LAMBDA ANDUR
- Manufacturer: EPS
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 400
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Number of circuits: 4
- Overall Length [mm]: 660
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS