Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- for OE number: 124 323 23 85
-
Fitting Position: Front Axle Left,
Front Axle Right, outer - Manufacturer: GSP
-
Fitting Position: Front Axle both sides,
outer - Material: Rubber
- Inner Diameter [mm]: 19
- Manufacturer: MERTZ
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
inner - Mounting Type: Rubber Mount
- Replace in pairs only:
- Quantity per axle: 2
-
Name: Kinnitus,
stabilisaator - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Siseläbimõõt [mm]: 15
- Manufacturer: 3RG
- Mounting Type: Rubber Mount
- for OE number: 124 323 49 85
-
Fitting Position: outer,
Front Axle both sides - Inner Diameter [mm]: 18
- Weight [kg]: 0.051
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
outer - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 18.5
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Front Axle Left,
Front Axle Right, outer - Inner Diameter [mm]: 18
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Inner Diameter [mm]: 18.5
- Material: Rubber
-
Fitting Position: Front Axle,
outer - Weight [kg]: 0.051
-
Name: Paigutus -
Kndmik DB P. W124/ 201 (18 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 18.5
- Material: Rubber
-
Fitting Position: Front Axle,
outer - Weight [kg]: 0.051
- Manufacturer: SWAG
- Lisainfo: 10 61 0022 SWA
- Additional information: 10 61 0022 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Laagritüüp: Kummipuks
-
Siseläbimõõt [mm]: 18,
5 - Garantii: Garantii 3 aastat või kuni 75 000 km
- Manufacturer: METZGER
- Inner Diameter [mm]: 18
-
Material: Rubber,
Rubber with fabric lining -
Fitting Position: Front Axle,
outer - Weight [kg]: 0.05
-
Name: Paigutus -
Kndmik DB P. W124/ 201/ 210 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 18
-
Material: Rubber,
Rubber with fabric lining -
Fitting Position: Front Axle,
outer - Weight [kg]: 0.05
- Observe service information:
- Manufacturer: SWAG
- Name: SW 10 61 0032
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 15
- Manufacturer: JP GROUP
-
Lisainfo: Grommet for stabilizer,
rear, ®15 mm -
Additional information: Grommet for stabilizer,
rear, ®15 mm
-
Fitting Position: outer,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 18
- Outer Diameter [mm]: 40
- Height [mm]: 38
- Required quantity: 2
-
Name: Paigutus -
Kndmik DB P. W124/ 201 (18 - Manufacturer: MEY
- for OE number: A1243235085
-
Fitting Position: outer,
Front - Required quantity: 2
-
Material: Rubber,
Rubber with fabric lining - Weight [g]: 50
- Inner Diameter [mm]: 22
- Name: IM 35703
- Manufacturer: ORIGINAL IMPERIUM
- Length [mm]: 25
- Width [mm]: 28
- Thickness [mm]: 31
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 25
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.017
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- Length [mm]: 25.5
- Inner Diameter [mm]: 15.5
- Mounting Type: Rubber Mount
- Weight [kg]: 0.018
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 25
- Width [mm]: 28
- Thickness [mm]: 31
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 25
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.017
- Manufacturer: SWAG
- Name: SW 10 10 8170
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Left
-
Lisainfo: Bracket,
stabilizer mounting, front, left -
Additional information: Bracket,
stabilizer mounting, front, left
- Fitting Position: Front Axle Right
- Manufacturer: JP GROUP
-
Lisainfo: Bracket,
stabilizer mounting, front, right -
Additional information: Bracket,
stabilizer mounting, front, right
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
outer - Mounting Type: Rubber Mount
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle both sides
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 23
- Length [mm]: 38
- Weight [kg]: 0.06
- Manufacturer: RTS
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 25
- Outer Diameter [mm]: 45
- Length [mm]: 39
- paired article number: 271277
- Weight [kg]: 0.06
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: outer,
Front Axle - Required quantity: 2
- Inner Diameter [mm]: 15
- Manufacturer: TEDGUM
- Name: TG 00413002
-
Fitting Position: outer,
Front Axle both sides - Required quantity: 2
- paired article number: VKDS 358008
- Height [mm]: 36.8
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 38.6
- Manufacturer: SKF
- Name: SK VKDS358008
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- Suspension: for vehicles with sports suspension
- paired article number: VKDS 458007
- Inner Diameter [mm]: 15.5
- Name: SK VKDS458007
- Manufacturer: SKF
- Fitting Position: Front Axle Left
- Material: Sheet Steel
- paired article number: 401 497
-
Name: Kinnitus,
stabilisaatoripaigutus - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- paired article number: 401 496
-
Name: Kinnitus,
stabilisaatoripaigutus - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Left,
Front Axle - Weight [kg]: 0.225
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- paired article number: 40865
- Length [mm]: 192
- Width [mm]: 48
- Thickness [mm]: 70
- Fitting Position: Front Axle Left
- Weight [kg]: 0.225
-
Name: Kinnitus,
stabilisaatoripaigutus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 40866
- Length [mm]: 192
- Width [mm]: 48
- Thickness [mm]: 70
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- Weight [kg]: 0.225
-
Name: Kinnitus,
stabilisaatoripaigutus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 38
- Width [mm]: 52
- Thickness [mm]: 52
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 52
-
Material: Rubber with fabric lining,
Rubber -
Fitting Position: inner,
Front Axle - Weight [kg]: 0.058
-
Name: Paigutus -
Kndmik DB P. W202/ S202/ A208 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 38
- Width [mm]: 52
- Thickness [mm]: 52
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 52
-
Material: Rubber with fabric lining,
Rubber -
Fitting Position: inner,
Front Axle - Weight [kg]: 0.058
- Manufacturer: SWAG
- Name: SW 10 94 6474
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks