• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-VW-012
• Manufacturer: NTY

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 34
• Height [mm]: 100
• Transmission Code: DL501
• Manufacturer: KAMOKA FILTRY

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: 6-Speed Manual Transmission, Dual-Clutch Transmission

• Filter type: Filter Insert
• Manufacturer: JAPKO

• Transmission Type: CVT automatic transmission (stepless)
• Supplementary Article/Supplementary Info: with seal
• Filter type: Filter Insert
• See accessories list for additionally required parts:
• Fabrication Number: FSF-AU-005
• Manufacturer: NTY
• Name: NTY FSF-AU-005

• Filter type: Spin-on Filter
• Transmission Type: CVT automatic transmission (stepless)
• Transmission Code: 0AW
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Clutch: for vehicles with double clutch
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.024
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: S-Tronic 7-Gang
• Outer Diameter [mm]: 34
• Inner Diameter [mm]: 19
• Height [mm]: 100
• Manufacturer: HENGST FILTER

Transmission Type: Automatic Transmission, Manual-/optional automatic transmission

• Alternatively:
• Transmission Code: S-Tronic (DL501)
• Clutch: for vehicles with double clutch
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.034
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Diameter [mm]: 34
• Height [mm]: 99.3
• Inner Diameter 2 [mm]: 19
• Height 1 [mm]: 93
• Packaging height [cm]: 10.9
• Net Weight [g]: 25
• Packaging length [cm]: 5.5
• Packaging width [cm]: 5.5
• Manufacturer: KNECHT
• Name: KN HX186D

• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Spin-on Filter, Filter Insert
• See accessories list for additionally required parts:
• Fabrication Number: FSF-AU-006
• Manufacturer: NTY

• Filter type: Filter Insert
• Transmission Type: CVT automatic transmission (stepless)
• Length [mm]: 207
• Outer Diameter [mm]: 61
• Weight [kg]: 0.305
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Filter Insert
• Length [mm]: 207
• Outer Diameter [mm]: 61
• Weight [kg]: 0.305
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with seal
• Fabrication Number: FSF-AU-004
• Transmission Code: DL501 / 0B5
• Filter type: Filter Insert
• Observe system fill quantity:
• Manufacturer: NTY
• Name: NTY FSF-AU-004

Transmission Type: 7-Speed Dual-Clutch Transmission, Automatic Transmission

• Transmission ID: LKV/LKW/MVC/NDV
• Transmission Code: 021
• Width [mm]: 158
• Height [mm]: 215
• for OE number: 0AW 301 519 C S1
• Supplementary Article/Supplementary Info: with seal
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Filter type: Filter Insert
• Diameter [mm]: 61
• Height [mm]: 207
• Inner Diameter 2 [mm]: 7
• Inner Diameter 3 [mm]: 13.7
• Transmission Type: CVT automatic transmission (stepless)
• Packaging height [cm]: 21.5
• Net Weight [g]: 304
• Packaging length [cm]: 9.5
• Packaging width [cm]: 9.5
• Manufacturer: KNECHT
• Name: KN HX155

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Length [mm]: 281
• Width [mm]: 158
• Height [mm]: 214.5
• Inner Diameter 2 [mm]: 7
• Transmission Code: 0AW
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Fibre Composite
• Packaging width [cm]: 17.5
• Packaging length [cm]: 22.5
• Packaging height [cm]: 30
• Net Weight [g]: 440
• Manufacturer: KNECHT

Transmission Type: Automatic Transmission, CVT automatic transmission (stepless)

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Code: S-Tronic (DL501)
• Clutch: for vehicles with double clutch
• See accessories list for additionally required parts:
• Weight [kg]: 0.321
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 161
• Height [mm]: 92
• Transmission Code: DL501
• Manufacturer: KAMOKA FILTRY

Transmission Type: Automatic Transmission, 7-Speed Dual-Clutch Transmission

• Transmission Code: 0AW
• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Filter Insert
• See accessories list for additionally required parts:
• Weight [kg]: 0.377
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CCL-AU-041
• Manufacturer: NTY

Lisainfo: /AUTOMATYCZNEJ SKRZYNI BIEG£W/AUDI A4 B8 2011-,A5 2007-,A6 C7 2010-,A7 2011-,Q5 2011-,PORSCHE MACAN 2014-/SKRZYNIA BIEG£W Z PODW£JNYM SPRZGœEM 7-BIEGOWA/ Additional information: /AUTOMATYCZNEJ SKRZYNI BIEG£W/AUDI A4 B8 2011-,A5 2007-,A6 C7 2010-,A7 2011-,Q5 2011-,PORSCHE MACAN 2014-/SKRZYNIA BIEG£W Z PODW£JNYM SPRZGœEM 7-BIEGOWA/

• Transmission ID: LKV/LKW/MVC/NDV
• Filter type: Screen Filter
• Transmission Type: CVT automatic transmission (stepless)
• Length [mm]: 285
• Width [mm]: 160
• Thickness [mm]: 220
• Weight [kg]: 0.405
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: NDT, NDU, NDV, PLP
• Model Year from: 2012
• Block Separation:
• Model Year to: 2011
• Filter type: Filter Insert
• Transmission Code: 0AW
• Transmission Type: CVT automatic transmission (stepless)
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Filter type: Filter Insert
• General Information: gearbox oil filter
• Manufacturer: VIKA

• Transmission ID: LKV/LKW/MVC/NDV
• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Screen Filter
• Length [mm]: 285
• Width [mm]: 160
• Thickness [mm]: 220
• Weight [kg]: 0.405
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: METALCAUCHO

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DSG)
• Transmission Type: for 7-speed automatic transmission
• Supplementary Article/Supplementary Info: with seal
• Clutch: for vehicles with double clutch
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 0AW 301 516 H
• Filter type: Spin-on Filter
• Manufacturer: TRUCKTEC

• Transmission ID: LKV/LKW/MVC/NDV
• Transmission Type: CVT automatic transmission (stepless)
• Length [mm]: 281
• Width [mm]: 158
• Height [mm]: 215
• Weight [kg]: 0.376
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: 0AW
• Supplementary Article/Supplementary Info: with seal
• Filter type: Filter Insert
• See accessories list for additionally required parts:
• Transmission Type: CVT automatic transmission (stepless)
• Weight [kg]: 0.471
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: DL501, 0B5
• Supplementary Article/Info 2: with seal ring
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Filter type: Screen Filter
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: JPA

• Filter type: Spin-on Filter
• Weight [kg]: 0.36
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 31SKV056

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: for 7-speed automatic transmission, Dual-Clutch Transmission

• Transmission number from: 26058
• Transmission Type: CVT automatic transmission (stepless)
• Transmission Code: 0AW
• for OE number: 0AW 301 519 C
• Supplementary Article/Supplementary Info: with gaskets/seals
• Material: Paper
• Number of mounting bores: 21
• Manufacturer: METZGER

• Transmission ID: LKV/LKW/MVC/NDV
• Transmission Type: CVT automatic transmission (stepless)
• Length [mm]: 281
• Width [mm]: 158
• Height [mm]: 215
• Weight [kg]: 0.376
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: CVT automatic transmission (stepless)
• Supplementary Article/Supplementary Info: with gaskets/seals
• Quantity Unit: Set
• Transmission Code: 0AW
• Supplementary Article/Info 2: with bolts/screws
• Number of mounting bores: 3
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MEY

General Information: Smarter than OE – this MEYLE-KIT innovates the usual maintenance.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: DL501, 0B5
• Alternative Repair Kit: 8020089
• Supplementary Article/Info 2: with filter, with seal ring
• Supplementary Article/Supplementary Info: with oil filter housing
• Manufacturer: METZGER

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: DL501 / 0B5, PDK
• Supplementary Article/Supplementary Info: with seal
• Material: Rubber/Metal
• Manufacturer: METZGER

• Transmission Code: 0AW
• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Supplementary Article/Supplementary Info: with seal
• Clutch: for vehicles with double clutch
• Transmission Code: S-Tronic (DL501)
• See accessories list for additionally required parts:
• Weight [kg]: 0.516
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission ID: LKV/LKW/MVC/NDV
• Filter type: Pressure Filter Insert
• Transmission Code: 021
• Length [mm]: 281
• Width [mm]: 158
• Height [mm]: 215
• Weight [kg]: 0.376
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Length [mm]: 255.1
• Width [mm]: 209
• Height [mm]: 47.3
• Inner Diameter 2 [mm]: 35
• Transmission Code: 0BK, 8HP55
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Metal Elastomer Gasket
• Number of Holes: 12
• Recommended change interval [km]: 80,000
• Packaging length [cm]: 38
• Packaging height [cm]: 5
• Packaging width [cm]: 54
• Net Weight [g]: 685
• Manufacturer: KNECHT
• Name: KN HX189KIT

Transmission Type: Automatic Transmission, 8-Speed Automatic Transmission

• Transmission Type: CVT automatic transmission (stepless)
• Transmission Code: 0AW
• See accessories list for additionally required parts:
• Filter type: Spin-on Filter, Filter Insert
• Weight [kg]: 0.353
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Lisainfo: V10-3021 VAI
• Additional information: V10-3021 VAI

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 8HP55, 8HP55 A, 0BK
• Transmission Type: Manual-/optional automatic transmission
• Manufacturer: HENGST FILTER