• Number of pins: 2
• Colour: black
• Lisainfo: Temperature sensor for air intake
• Additional information: Temperature sensor for air intake

• Engine Code: CAEB, CDNC
• Fitting Position: Thermostat
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: dark grey
• Fitted Diameter [mm]: 25
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 20
• for OE number: 06A 919 501 A
• Manufacturer: MEAT&DORIA

• Engine Code: CDNC
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Thread Size: 12 mm
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Number of pins: 2
• Connector Shape: D Shape
• Colour: black
• Fitting Depth [mm]: 44
• for OE number: 06B 905 379 D
• Manufacturer: MEAT&DORIA

• Fabrication Number: ECM-VW-003
• Manufacturer: NTY

• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fabrication Number: ECP-AU-016
• Manufacturer: NTY

• for OE number: 07L 905 163 C
• Length [mm]: 40
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-AU-015
• Manufacturer: NTY

• Fabrication Number: ECM-AU-003
• Manufacturer: NTY

Lisainfo: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5 Additional information: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5

• Number of pins: 3
• Weight [kg]: 0.02
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: CDNC
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Number of connectors: 2
• Weight [kg]: 0.012
• for OE number: 06B 905 379 D
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Socket colour: black
• Fabrication Number: ESS-AU-004
• Manufacturer: NTY

• Voltage [V]: 12
• Manufacturer: FAE
• Additional information: NRF33227
• Lisainfo: NRF33227

• General Information: intake air temperature sensor
• Manufacturer: BORSEHUNG

• Number of pins: 4
• for OE number: 036 906 051 C
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Vehicle Identification Number (VIN) from: 8F-C-000 001
• Cable Cross Section [mm²]: 0.75
• Manufacturer Restriction: VAG
• Socket Width [mm]: 2.8
• Number of pins: 3
• Cable Length [mm]: 250
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

• Sensor Type: NTC Sensor
• Diameter [mm]: 12
• Supplementary Article/Info 2: with connector parts
• Colour: black
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Engine Code: CDNC
• Required quantity: 1
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Construction Year to: 05.2013
• Number of pins: 4
• Connector Shape: D Shape
• Number of mounting bores: 2
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• for OE number: 06B906051
• Manufacturer: DELLO AUTOMEGA

• for OE number: 07L 905 163 C
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Diameter [mm]: 12
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Number of pins: 2
• Manufacturer: MEYLE

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• for OE number: 07L 905 163 C
• for article number: 87470E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Quantity: 1
• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Socket Width [mm]: 2.8
• Supplementary Article/Supplementary Info: with socket housing, with seal
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, andur (ohuvotu rohk)
• Manufacturer: HBE

• Number of pins: 2
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Alternative Repair Kit: 550476
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Engine Code: CDNC
• Required quantity: 1
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Number of circuits: 3
• Plug Type: Butt Joint
• Cable Length [mm]: 200
• Wire cross-section [mm²]: 0,5
• Manufacturer: METZGER

• Quantity: 1
• Colour: blue
• Number of connectors: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: DLP

• Length [mm]: 40
• Width [mm]: 43
• Thickness [mm]: 18
• Number of connectors: 3
• Weight [kg]: 0.011
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Supplementary Article/Info 2: without cable

• Length [mm]: 40
• Width [mm]: 43
• Thickness [mm]: 18
• Number of connectors: 3
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 94 3778
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Observe technical data:
• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Construction Year to: 05.2013
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Number of pins: 3
• Connector Shape: oval
• Name: Andur,drosselklapiasend
• Manufacturer: MAX

• General Information: pressure sensor
• Manufacturer: VIKA

• Engine Code: CDNC
• Pressure from [kPA]: 27
• Pressure to [kPA]: 303
• Output Voltage, from [V]: 0.505
• Output Voltage, up to [V]: 4.71
• Name: EP 1.993.228
• Manufacturer: EPS

• Quantity: 1
• Block Separation:
• Colour: green
• Cable Length [mm]: 385
• Number of pins: 3
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: before catalytic converter
• Manufacturer Restriction: VAG, Renault
• Number of pins: 6
• Socket Width [mm]: 1.5
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 200
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, EGR-klapp
• Manufacturer: HBE

• Fabrication Number: EFP-AU-006
• Manufacturer: NTY
• Name: NTY EFP-AU-006

• Engine Code: CDNC
• Fitting Position: Brake Booster
• Vehicle Equipment: for vehicles with start-stop function
• Construction Year from: 08.2011
• Supplementary Article/Info 2: with integrated air temperature sensor
• Weight [kg]: 0.044
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Supplementary Article/Info 2: Low Pressure Side
• Fuel Mixture Formation: Direct Injection
• Fabrication Number: EFP-AU-004
• Manufacturer: NTY
• Name: NTY EFP-AU-004

• Quantity: 1
• Weight [kg]: 0.05
• Required quantity: 1
• Number of connectors: 3
• General Information: hall sender camshaft
• Manufacturer: VIKA

• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Engine Code: CDNC
• Construction Year from: 05.2009
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Name: Lambda andur
• Manufacturer: MAX

• Number of pins: 3
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Range of Applications (cleaner): Polyamid 6.6
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Required quantity: 1
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU013122191
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Fitting Position: engine sided
• Number of connectors: 3
• Colour: green
• Cable Length [mm]: 465
• Weight [kg]: 0.062
• Name: DETONATSIOONIANDUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: VDO

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Colour: black
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Used part return not required:
• Fabrication Number: EPP-AU-015
• Manufacturer: NTY

• Engine Code: CDNC
• Construction Year from: 05.2009
• Lambda Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• General Information: pressure sensor
• Manufacturer: VIKA

• Construction Year to: 05.2013
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Weight [kg]: 0.27
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 720
• Manufacturer: DELPHI

• Fitting Position: from fuel distributor to feed pipe
• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 1
• Connector/Clamp: Connector may need adjustment
• Fitting Position: Rear
• Lambda Sensor: Heated
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; rear; 4 wire
• Manufacturer: VIKA

• Engine Code: CDNC
• Fitting Position: after catalytic converter
• Colour: black
• Cable Length [mm]: 800
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.243
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Number of pins: 5
• Connector Shape: rectangular
• Housing Type: with housing
• Housing material: Plastic
• Supplementary Article/Info 2: with integrated grille
• for OE number: 06J906461D
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 3
• Pressure from [kPA]: 50
• Pressure to [kPA]: 150
• Manufacturer: FAE

• Engine Code: CDNC
• Construction Year to: 05.2013
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 02.2012, 10.2013
• Transmission Type: 6-Speed Manual Transmission, Manual Transmission
• Block Separation:
• Construction Year from: 03.2012, 11.2013
• Number of mounting bores: 3
• Number of pins: 6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Vehicle Equipment: for vehicles with brake energy recovery, for vehicles with start-stop function, for vehicles without drive-select Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.2
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY