Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: 199B1000
- Manufacturer: JP GROUP
-
Lisainfo: Sensor,
crankshaft pulse -
Additional information: Sensor,
crankshaft pulse
-
Engine Code: 199 B1.000,
330 A1.000 - Construction Year from: 01.2013
- Block Separation:
- Construction Year to: 12.2018
- Number of circuits: 2
- Cable Length [mm]: 300
- Weight [kg]: 0.08
- Observe service information:
-
Name: Andur,
vlistemperatuur - Manufacturer: FEB
- Additional information: FE107141
- Lisainfo: FE107141
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fabrication Number: ECT-
FT- 002 - Manufacturer: NTY
-
Name: NTY ECT-
FT- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Cable Length [mm]: 300
- Observe service information:
-
Fabrication Number: ECT-
PE- 000 - Manufacturer: NTY
-
Name: NTY ECT-
PE- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 2
- Connector Shape: rectangular
- Sensor Type: NTC Sensor
- Colour Coding: black
-
Supplementary Article/Info 2: with seal ring,
with bracket - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: ECP-
AR- 004 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Thread Size: 9 mm
- Manufacturer: VERNET
-
Emission Standard: Euro 5,
Euro 6 - Connector Shape: oval
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: not have
- Thread Size: not have
- Name: NI 207097
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
-
Emission Standard: Euro5/
Euro6 - Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: oval
- Number of pins: 2
- Socket colour: black
- for OE number: 55206393
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Fitting Depth [mm]: 22.5
- Manufacturer: FAST
- Engine Code: 199 B1.000
-
Emission Standard: Euro4/
Euro5 - Number of connectors: 2
- Colour: black
- Weight [kg]: 0.011
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
- Weight [kg]: 0.04
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Connector Shape: oval
- Number of pins: 2
-
Supplementary Article/Info 2: with seal ring,
without cable - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: 199 B1.000
-
Emission Standard: Euro4/
Euro5 - Number of connectors: 2
- Colour: black
- Weight [kg]: 0.011
-
Supplementary Article/Supplementary Info: with retaining spring,
with seal - Name: SW 33 10 2487
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Emission Standard: Euro 5
- Housing Colour: black
- Number of pins: 2
- Thread Size: NA
- Spanner Size: 0
- Manufacturer: DELPHI
- Name: DE TS10409
- Engine Code: 199 B1.000
-
Emission Standard: Euro5/
Euro6 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
for article number: 1.879.919, 1.879.936, 1.880.783, 1.880.809, 1.880.931, 1.880.986
- Required quantity: 1
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
-
Name: CZUJNIK POO½ENIA WAU KORB. FIAT 1,
3JTD 03- - Manufacturer: BRM
-
Engine Code: 199 B1.000,
330 A1.000 -
Emission Standard: Euro 5,
Euro 6 - Block Separation:
- Sensor Type: NTC Sensor
- Supplementary Article/Supplementary Info: with retaining spring
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: MEY
- Height [mm]: 36.5
- Resistor [Ohm]: 850
- Number of connectors: 2
- Manufacturer: VERNET
- Number of pins: 2
- Supplementary Article/Supplementary Info: with seal
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Fitting Position: Flywheel side
-
Supplementary Article/Info 2: for crankshaft,
without cable - Number of pins: 2
-
Weight [kg]: 0.035,
0.063 - Housing Colour: black
- Required quantity: 1
- Resistor [Ohm]: 790
-
Sensor Type: Passive sensor,
Inductive Sensor - Number of connectors: 2
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 36.5
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 12.2018
- Sensor Type: Passive sensor
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- Voltage [V]: 12
-
Name: ANDUR,
VNTVOLL - Manufacturer: MAX
-
Engine Code: 199 B1.000,
330 A1.000 - Transmission Type: Manual Transmission
- Block Separation:
- Sensor Type: Passive sensor
-
Supplementary Article/Info 2: with seal ring,
without cable - Number of pins: 2
- Fitting Position: on transmission housing
-
Name: Andur,
kiirus/ prded - Manufacturer: MAX
- Number of pins: 2
-
Name: ANDUR,
VNTVOLL - Manufacturer: DLP
- Colour: black
- Sensor Type: Inductive Sensor
- Alternatively:
- Number of pins: 2
- Weight [kg]: 0.05
- Resistor [Ohm]: 790
- Alternative Repair Kit: 550003
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 36
- Manufacturer: ERA
- Engine Code: 199 B1.000
-
Emission Standard: Euro4/
Euro5 - for OE number: 13 38 359
- Weight [kg]: 0.015
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: 199 B1.000
- Transmission Type: Manual Transmission
-
Name: ANDUR,
PRDED - Manufacturer: EPS
- Engine Code: 199 B1.000
- Length [mm]: 37
- Number of connectors: 2
- Weight [kg]: 0.03
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: 199 B1.000
-
Name: ANDUR,
VNTVOLL - Manufacturer: EPS
- Engine Code: 199 B1.000
- Length [mm]: 36.5
- Number of connectors: 2
- Weight [kg]: 0.03
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 28
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET
- Sensor Type: Inductive Sensor
- Number of pins: 2
-
Name: ANDUR,
VNTVOLL - Manufacturer: MEY
-
Engine Code: 199 B1.000,
330 A1.000 - Transmission Type: Manual Transmission
- Block Separation:
- Operating voltage [V]: 12
- Sensor Type: Passive sensor
-
Supplementary Article/Info 2: without cable,
with seal ring - Number of pins: 2
-
Name: Andur,
prded - Manufacturer: MEY
- Voltage [V]: 12
- Resistor [Ohm]: 850
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Fitting Position: Flywheel side
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU009163401
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 2
- Housing Colour: black
- Supplementary Article/Info 2: without cable
- Manufacturer: FAE
- Construction Year to: 12.2018
-
Name: ANDUR,
VNTVOLL - Manufacturer: BOS
-
Weight [kg]: 0.02,
0.034 - Colour: white
-
Supplementary Article/Info 2: for crankshaft,
with seal ring, without cable - Housing Colour: white
- Number of pins: 3
- Number of connectors: 3
- Resistor [Ohm]: 850
- Outer Diameter [mm]: 20.55
- Sensor Type: Hall Sensor
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 28
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks