• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 41
• Outer Diameter [mm]: 264
• Centering Diameter [mm]: 60
• Brake Disc Thickness [mm]: 10
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Number of Holes: 4
• No. of holes 2: 6
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 40.5
• Centering Diameter [mm]: 60
• Inner Diameter [mm]: 136.8
• Bore Ø [mm]: 14
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Brake Disc Hub Height [mm]: 30.5
• Rim Hole Number: 4
• Height [mm]: 40.5
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 264
• Centering Diameter [mm]: 60
• Bolt Hole Circle Ø [mm]: 100
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Rims: for light alloy rims, for steel rims
• Block Separation:
• Brake Disc Type: solid
• Number of Holes: 4
• Test Mark: E1 90R-02C0967/2529
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 60
• Height [mm]: 40.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3945

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Height [mm]: 40.6
• Rim Hole Number: 4
• Weight [kg]: 3.58
• Brake Disc Type: solid
• Surface: Coated
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 284
• Brake Disc Thickness [mm]: 22
• Number of Holes: 4
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 264
• Height [mm]: 40.6
• Centering Diameter [mm]: 60
• Surface: Coated
• Minimum thickness [mm]: 8
• Hole Arrangement/Number: 4/8
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 22
• Outer Diameter [mm]: 284
• Height [mm]: 43.3
• Number of Holes: 6
• Centering Diameter [mm]: 60
• Bolt Hole Circle Ø [mm]: 100
• Surface: Painted
• Weight [kg]: 12.55
• Thread Size: 14,2
• Minimum thickness [mm]: 20
• Manufacturer: TOMEX BRAKES

• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 4
• Thickness [mm]: 40.3
• Outer Diameter [mm]: 257
• Bolt Hole Circle Ø [mm]: 98
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 20.2
• Centering Diameter [mm]: 59
• Weight [kg]: 5.32
• Name: SW 70 92 2927
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 4
• Thickness [mm]: 40
• Outer Diameter [mm]: 257
• Bolt Hole Circle Ø [mm]: 98
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 20.2
• Centering Diameter [mm]: 59
• Weight [kg]: 5.32
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 4
• Thickness [mm]: 40.3
• Outer Diameter [mm]: 257
• Bolt Hole Circle Ø [mm]: 98
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 20.2
• Centering Diameter [mm]: 59
• Weight [kg]: 5.32
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Number of Holes: 4
• Test Mark: E1 90R-02C0343/1465
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 257
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 60
• Height [mm]: 40.6
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG4004

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 257
• Brake Disc Thickness [mm]: 22
• Height [mm]: 40.6
• Minimum thickness [mm]: 20
• Surface: Coated
• Inner Diameter [mm]: 127
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Hole Arrangement/Number: 04/08
• Wheel Bolt Bore Ø [mm]: 14.3
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 10.5
• Weight [kg]: 5
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Rims: for steel rims
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 22
• Outer Diameter [mm]: 257
• Height [mm]: 40.5
• Number of Holes: 6
• Centering Diameter [mm]: 60
• Bolt Hole Circle Ø [mm]: 100
• Surface: Painted
• Weight [kg]: 10.35
• Minimum thickness [mm]: 20
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Outer Diameter [mm]: 284
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Brake Disc Type: Vented
• Number of Holes: 4
• No. of holes 2: 6
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 43.5
• Centering Diameter [mm]: 60
• Inner Diameter [mm]: 127
• Bore Ø [mm]: 14.2
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Outer Diameter [mm]: 284
• Brake Disc Thickness [mm]: 22
• Height [mm]: 43.5
• Rim Hole Number: 4
• Brake Disc Type: Vented
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Hub Diameter [mm]: 137
• Weight [kg]: 5.88
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Painted, Cross-hatch
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 40.5
• Centering Diameter [mm]: 60
• Inner Diameter [mm]: 136.5
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 4
• No. of holes 2: 6
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 40.5
• Centering Diameter [mm]: 60
• Inner Diameter [mm]: 136.8
• Bore Ø [mm]: 14
• MAPP code available:
• Test Mark: E1 90R-02C0165/0717
• Manufacturer: ATE

• Fitting Position: Front Axle
• Rims: for steel rims
• Brake Disc Type: Vented
• Number of Holes: 4
• Test Mark: E1 90R-02C0958/2530
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 284
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 60
• Height [mm]: 43.3
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3944

• Engine Code: 199 B1.000
• Construction Year to: 12.2012
• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 4
• Number of mounting bores: 2
• Thickness [mm]: 43.2
• Outer Diameter [mm]: 284
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 60
• Weight [kg]: 6.4
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Model Year to: 2018
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 264
• Thread Size: 14,2
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Height [mm]: 40.5
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 60
• Colour: black
• Surface: Painted
• Test Mark: E1 90R-02 C0190/0537
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Height [mm]: 40.5
• Weight [kg]: 7.62
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 264
• Number of Holes: 4
• Centering Diameter [mm]: 60
• Tightening Torque [Nm]: 98
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Version: JC
• Packaging length [cm]: 25.5
• Packaging width [cm]: 25.5
• Packaging height [cm]: 8.5
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 41
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 264
• Surface: Coated
• Minimum thickness [mm]: 8
• Tightening Torque [Nm]: 98
• Manufacturer: BREMBO
• Name: BR 08.9460.11

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 257
• Brake Disc Thickness [mm]: 22
• Height [mm]: 40.6
• Minimum thickness [mm]: 20
• Surface: Coated
• Inner Diameter [mm]: 127
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Hole Arrangement/Number: 04/08
• Wheel Bolt Bore Ø [mm]: 14.3
• Weight [kg]: 5
• Name: HE 8DD355112581
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Height [mm]: 40
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 8
• Weight [kg]: 3.6
• Hole Arrangement/Number: 8/4
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Model Year to: 2018
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 22
• Thread Size: 14,2
• Outer Diameter [mm]: 284
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 6
• Height [mm]: 43.3
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 60
• Colour: black
• Surface: Painted
• Test Mark: E1 90R-02 C0176/0573
• Manufacturer: TRW
• Quality class: Q
• Name: Brake discs

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 284
• Brake Disc Thickness [mm]: 22
• Height [mm]: 43.2
• Minimum thickness [mm]: 20
• Inner Diameter [mm]: 127
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Hole Arrangement/Number: 04/08
• Wheel Bolt Bore Ø [mm]: 14.2
• Packaging length [cm]: 29.3
• Packaging width [cm]: 29.3
• Packaging height [cm]: 10.5
• Weight [kg]: 6.1
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 284
• Brake Disc Thickness [mm]: 22
• Height [mm]: 43.2
• Minimum thickness [mm]: 20
• Surface: Coated
• Inner Diameter [mm]: 127
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Hole Arrangement/Number: 04/08
• Wheel Bolt Bore Ø [mm]: 14.2
• Weight [kg]: 6.1
• Name: HE 8DD355112601
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Rims: Steel Rim
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 22
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 41
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 257
• Surface: Coated
• Minimum thickness [mm]: 20
• Tightening Torque [Nm]: 98
• Manufacturer: BREMBO

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Diameter [mm]: 284
• Height [mm]: 43.3
• Minimum thickness [mm]: 20
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 60
• Tightening Torque [Nm]: 98
• Brake Disc Thickness [mm]: 22
• Outer Diameter [mm]: 284
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 22
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 43
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 284
• Surface: Coated
• Minimum thickness [mm]: 20
• Tightening Torque [Nm]: 98
• Manufacturer: BREMBO
• Name: BR 09.4939.31

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.

• Fitting Position: Front Axle
• paired article number: 573075J, 573165J, 573306J
• Test Mark: R90 Homologated
• Height [mm]: 43.3
• Weight [kg]: 12.44
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Outer Diameter [mm]: 284
• Number of Holes: 4
• Centering Diameter [mm]: 60
• Tightening Torque [Nm]: 98
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Version: JC
• Packaging length [cm]: 30
• Packaging width [cm]: 30
• Packaging height [cm]: 11.5
• Manufacturer: JURID

• Fitting Position: Front Axle
• Outer Diameter [mm]: 284
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 4
• No. of holes 2: 6
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 43.5
• Centering Diameter [mm]: 60
• Inner Diameter [mm]: 127
• Bore Ø [mm]: 14.2
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0115/0230
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Surface: Coated
• Outer Diameter [mm]: 284
• Brake Disc Thickness [mm]: 22
• Height [mm]: 44
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 20
• Weight [kg]: 6.1
• Hole Arrangement/Number: 8/4
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Rims: Steel Rim
• Brake Disc Type: internally vented, slotted
• Brake Disc Thickness [mm]: 22
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 41
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 257
• Surface: Coated
• Minimum thickness [mm]: 20
• Tightening Torque [Nm]: 98
• Manufacturer: BREMBO
• Name: BR 09.5843.77

Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

• Fitting Position: Front Axle
• Rims: Steel Rim
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 22
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 41
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 257
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 20.5
• Tightening Torque [Nm]: 98
• Technical Information: ECE R 90 Homologation.
• Manufacturer: BREMBO
• Name: BR 09.5843.3X

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Front Axle
• Brake Disc Type: internally vented, slotted
• Brake Disc Thickness [mm]: 22
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 43
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 284
• Surface: Coated
• Minimum thickness [mm]: 20
• Tightening Torque [Nm]: 98
• Name: BR 09.4939.77
• Manufacturer: BREMBO

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.

• Fitting Position: Front Axle
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 22
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 43
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 284
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 20.5
• Tightening Torque [Nm]: 98
• Technical Information: ECE R 90 Homologation.
• Manufacturer: BREMBO
• Name: BR 09.4939.3X

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Front Axle
• Brake Disc Type: internally vented, Perforated
• Surface: Coated
• Outer Diameter [mm]: 284
• Brake Disc Thickness [mm]: 22
• Height [mm]: 44
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Test Mark: KBA 60872
• Minimum thickness [mm]: 20
• Weight [kg]: 6.1
• Hole Arrangement/Number: 8/4
• Manufacturer: ZIMMERMANN