Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Engine Compartment
- Cable Length [mm]: 250
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with shrink connector
- Supplementary Article/Info 2: with plug
- Number of circuits: 2
- Weight [kg]: 0.017
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: 25166
- Length [m]: 15
- Width to [cm]: 1.5
- Colour: black
- Material: Fabric
- Manufacturer: MEAT&DORIA
- Supplementary Article/Supplementary Info: with accessories
- Number of pins: 5
- Number of circuits: 5
- Weight [kg]: 0.04
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Fitting Position: Engine Compartment
- Cable Length [mm]: 250
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with shrink connector
- Supplementary Article/Info 2: with plug
- Number of circuits: 4
- Weight [kg]: 0.044
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cable Length [mm]: 250
- Number of circuits: 1
- Cable Cross Section [mm²]: 0.75
- Plug Type: Shrink Connector
-
Material: CuSn
(copper- tin) - Cable insulation material: Silicone
-
Name: Paranduskomplekt,
kaablikomplekt - Manufacturer: MD
- Cable Length [mm]: 100
- Supplementary Article/Info 2: without bellow
- Number of circuits: 2
- Weight [kg]: 0.021
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Tail Light
- Cable Length [mm]: 100
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: without bellow
- Number of circuits: 4
- Weight [kg]: 0.03
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of circuits: 2
- Cable Length [mm]: 100
- Plug Type: Shrink Connector
- Connector Shape: angular
- Cable cross-section from [mm²]: 4
- Cable cross-section to [mm²]: 4
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Manufacturer: METZGER
- Cable Length [mm]: 300
- Number of circuits: 5
- Plug Type: Shrink Connector
- Connector Shape: oval
- Cable cross-section from [mm²]: 0.5
- Cable cross-section to [mm²]: 2.5
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) -
Name: Paranduskomplekt,
kaablikomplekt - Manufacturer: MD
- Fitting Position: Between interior blower and series resistor
-
Manufacturer Restriction: Alfa Romeo,
Fiat, Opel - Number of pins: 5
- Number of occupied pins: 5
- Supplementary Article/Supplementary Info: with socket housing
- Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
- Cable Length [mm]: 150
- Cable cross-section from [mm²]: 1.5
- Cable cross-section to [mm²]: 2.5
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- for OE number: 55702407
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabli remondi kmpl, salongi soojapuhur(mootorieelsoojendus)
- Heating/Cooling: for vehicles with factory fitted air conditioning
- Number of circuits: 4
- Cable Length [mm]: 100
- Plug Type: Shrink Connector
- Connector Shape: angular
-
Cable Cross Section [mm²]: 1.5,
4 - Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Product must be determined on the vehicle or the motor:
- Article number of recommended accessories: 0917108
- Manufacturer: METZGER
- Fitting Position: Between interior blower and series resistor
- Cable insulation material: Silicone
- Supplementary Article/Info 2: with plug
- Cable Length [mm]: 100
- Number of circuits: 4
- Cable Cross Section [mm²]: 4
-
Material: CuSn
(copper- tin) - Plug Type: Shrink Connector
- Manufacturer: METZGER
- Number of circuits: 5
- Cable Length [mm]: 100
- Fitting Position: inner
- Plug Type: Shrink Connector
- Connector Shape: angular
- Cable cross-section from [mm²]: 1.5
- Cable cross-section to [mm²]: 2.5
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Product must be determined on the vehicle or the motor:
- Article number of recommended accessories: 0917108
- Manufacturer: METZGER
- Fitting Position: Vehicle Tailgate
- Cable Length [mm]: 250
- Supplementary Article/Supplementary Info: with hose
- Supplementary Article/Info 2: with bellow
- Number of circuits: 14
- Weight [kg]: 0.07
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks