• Switch Pressure [bar]: 0.3
• Housing Colour: black
• Number of pins: 1
• Lisainfo: Oil Pressure Switch
• Additional information: Oil Pressure Switch

• Spanner Size: 19
• for OE number: 55190791
• Manufacturer: KAMOKA

• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Operating Mode: Hydraulic
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN
• Lisainfo: 206 957 HP
• Additional information: 206 957 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Pressure [bar]: 5
• Housing Colour: black
• Thread Size: M14x1.5-6g
• Diameter [mm]: 21
• Spanner Size: 21
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90000
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.42
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 70 23 0001

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: brown
• Weight [kg]: 0.024
• for OE number: 55190791
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: brown
• Weight [kg]: 0.024
• for OE number: 55190791
• Name: SW 70 10 6570
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 169 A4.000
• Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-AR-000
• Manufacturer: NTY

• Fabrication Number: ESS-FT-000
• Manufacturer: NTY

• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV499

• for OE number: 55229700
• Length [mm]: 71
• Fabrication Number: ECP-AR-005

• Engine Code: 169 A4.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.326
• Manufacturer: EPS

for article number: 1.830.326K, 1.880.672, 1.880.699, 1.880.701, 1.880.758, 1.880.938

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Vehicle Equipment: for vehicles without start-stop function
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009168701
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Equipment: for vehicles with start-stop function
• Number of pins: 3
• Name: DE SS12316-12B1
• Manufacturer: DELPHI

• Engine Code: 169 A4.000
• Vehicle Equipment: for vehicles without start-stop function
• Name: EP 1.953.378
• Manufacturer: EPS

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Number of connectors: 3
• Weight [kg]: 0.016
• Name: SW 33 10 3718
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: FAST

• Vehicle Equipment: for vehicles without start-stop function
• Height [mm]: 34.5
• Resistor [Ohm]: 1,100
• Number of connectors: 2
• Manufacturer: VERNET

Manufacturer: MAGNETI MARELLI

• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550881
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 34
• Manufacturer: ERA

• Construction Year to: 12.2018
• Manufacturer: BOSCH

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: FAST

• Vehicle Equipment: for vehicles without start-stop function
• Length [mm]: 71
• Number of connectors: 2
• Weight [kg]: 0.044
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11080

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550245
• Manufacturer: ERA

• Number of pins: 2
• Manufacturer: FAST

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114331
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Equipment: for vehicles without start-stop function
• Length [mm]: 70.8
• Number of connectors: 2
• Weight [kg]: 0.044
• Name: SW 70 94 4841
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Emission Standard: Euro 5
• Vehicle Equipment: for vehicles with start-stop function
• Fabrication Number: ESL-AR-001
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Construction Year to: 12.2018
• Vehicle Equipment: for vehicles with start-stop function
• Manufacturer: BOSCH

• Fabrication Number: ESL-FT-000
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Fabrication Number: ESL-FT-004
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Number of connectors: 2
• Weight [kg]: 0.04
• for OE number: 55190562
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550629
• Fitting Depth [mm]: 34
• Manufacturer: ERA

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11146

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10170

• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Name: HE 6PU009168081
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.14
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 12.2018
• Engine Code: 169A4.000, 199A4.000
• Vehicle Equipment: for vehicles with start-stop function
• Lambda Sensor: Regulating Probe, Heated
• Conductor Number: 4
• Resistor [Ohm]: 3.5
• Length [mm]: 310
• Number of circuits: 4
• Cable Length [mm]: 310
• Name: MM OSM167
• Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV122

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Fitting Position: Front
• Emission Standard: Euro 5
• Quantity: 2
• Vehicle Equipment: for vehicles without start-stop function
• Number of connectors: 4
• Length [mm]: 325
• Manufacturer: VERNET

Exhaust System: before catalytic converter, after catalytic converter

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Emission Standard: Euro 4 (D4)
• Fitting Position: before catalytic converter
• Vehicle Equipment: for vehicles without start-stop function
• Quantity: 1
• Cable Length [mm]: 385
• Manufacturer: DELPHI

Additional information: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)"

• Number of circuits: 4
• Resistor [Ohm]: 6
• Length [mm]: 325
• Conductor Number: 4
• Cable Length [mm]: 325
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 01.2013
• Conductor Number: 4
• Resistor [Ohm]: 3.7
• Length [mm]: 720
• Number of circuits: 4
• Cable Length [mm]: 720
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Emission Standard: Euro 4 (D4)
• Vehicle Equipment: for vehicles without start-stop function
• Quantity: 1
• Block Separation:
• Cable Length [mm]: 300
• Manufacturer: DELPHI
• Name: DE ES20302-12B1

Lambda Sensor: Diagnostic Probe, Regulating Probe, Planar probe, Heated Fitting Position: after catalytic converter, before catalytic converter

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.08
• Name: VA 253847
• Manufacturer: VALEO

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Engine Code: 169 A4.000
• Emission Standard: Euro 5
• Required quantity: 1
• Vehicle Equipment: for vehicles without start-stop function
• Block Separation:
• Cable Length [mm]: 350
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.008
• Number of circuits: 4
• Name: EP 1.998.097
• Manufacturer: EPS

Fitting Position: before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year to: 12.2018
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Emission Standard: Euro 4 (D4)
• Vehicle Equipment: for vehicles without start-stop function
• Number of circuits: 4
• Overall Length [mm]: 325
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 360
• Number of circuits: 4
• Manufacturer: ERA

• Construction Year to: 12.2018
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Emission Standard: Euro 5
• Vehicle Equipment: for vehicles without start-stop function
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986507

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 300
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 300
• Number of pins: 4
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Emission Standard: Euro 5
• Fitting Position: after catalytic converter
• Vehicle Equipment: for vehicles with start-stop function
• Quantity: 1
• Cable Length [mm]: 340
• Name: DE ES21061-12B1
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Emission Standard: Euro 4 (D4)
• Fitting Position: before catalytic converter
• Vehicle Equipment: for vehicles without start-stop function
• Quantity: 1
• Cable Length [mm]: 540
• Name: DE ES20303-12B1
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe, Heated
• Emission Standard: Euro 4 (D4)
• Fitting Position: before catalytic converter
• Vehicle Equipment: for vehicles without start-stop function
• Required quantity: 1
• Cable Length [mm]: 350
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066141
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Emission Standard: Euro 5
• Fitting Position: before catalytic converter
• Vehicle Equipment: for vehicles with start-stop function
• Quantity: 1
• Cable Length [mm]: 310
• Name: DE ES21108-12B1
• Manufacturer: DELPHI

• Construction Year to: 12.2018
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Emission Standard: Euro 4 (D4)
• Vehicle Equipment: for vehicles without start-stop function
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Emission Standard: Euro 4 (D4)
• Exhaust System: for pre-catalytic converter
• for OE number: 46751082
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2006

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)"

• Emission Standard: Euro 4 (D4)
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Heated
• Emission Standard: Euro 5
• Fitting Position: after catalytic converter
• Vehicle Equipment: for vehicles with start-stop function
• Required quantity: 1
• Cable Length [mm]: 275
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358103531
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 55190791
• Supplementary Article/Info 2: with seal ring