• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Suspension Strut Support Bearing
• Additional information: Suspension Strut Support Bearing

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP

Lisainfo: Friction Bearing, suspension strut support mounting Additional information: Friction Bearing, suspension strut support mounting

• Fitting Position: Front Axle Right, Front Axle Left
• Weight [kg]: 0.05
• Name: DY 73-27171
• Manufacturer: DYS

• Fitting Position: Rear Axle
• Fabrication Number: AB-CT-006
• Manufacturer: NTY

• Fitting Position: Front Axle Right, Front Axle Left
• Fabrication Number: AD-CT-014
• Manufacturer: NTY

• Fitting Position: Front Axle
• for OE number: 503375
• Name: VEDRUAMORDI TUGILAAGER
• Manufacturer: SAS

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 64
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.053
• Manufacturer: RTS

• Fitting Position: Front Axle
• Height [mm]: 222
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 100
• Fabrication Number: AD-KA-324
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY
• Name: NTY AD-KA-324

• Outer Diameter [mm]: 99
• Height [mm]: 20
• Shock Absorber Design: Suspension Strut
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 67
• Name: Laager - K„„ndmik PEUGEO
• Manufacturer: MAX

• Fitting Position: Front Axle
• Inner Diameter [mm]: 63
• Outer Diameter [mm]: 100
• Height [mm]: 20
• Material: Plastic
• for OE number: 7700803635
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Laager,amorditugilaager
• Manufacturer: FAG

• Fitting Position: Front Axle, Right, Left
• Manufacturer: CORTECO
• Name: COC 80004831

• Fitting Position: Front Axle
• for OE number: 7700777654
• Name: Laager - K„„ndmik PEUGEOT
• Manufacturer: SAS

• Fitting Position: Front Axle
• reinforced version:
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Weight [kg]: 0.13
• Material: Metal
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 100
• Weight [g]: 130
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: METALCAUCHO

• Vehicle Identification Number (VIN): [S 70613612;]
• Fitting Position: Right, Left, Front Axle
• Inner Diameter 1 [mm]: 65
• Width 1 [mm]: 20
• Outer Diameter 1 [mm]: 100
• Manufacturer: SNR
• Name: SN M259.01
• Additional information: M259.01 SNR
• Lisainfo: M259.01 SNR

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without bearing
• Fabrication Number: AD-CT-005
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: DELLO AUTOMEGA

• Engine Code: EW10A
• Fitting Position: Front Axle
• Quantity per axle: 2
• Name: Laager - K„„ndmik RENAULT
• Manufacturer: SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle both sides
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.155
• Inner Diameter [mm]: 66.5
• Outer Diameter [mm]: 99
• Width [mm]: 20
• Manufacturer: 3RG

• Fitting Position: Front Axle
• Weight [kg]: 0.37
• Material: Rubber
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 119, 64.5
• Weight [g]: 370
• Supplementary Article/Info 2: without ball bearing
• not for article number: 2650
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Weight [g]: 151
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 20
• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 99
• Name: IM 36231/1
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, both sides
• Quality: OE Performance
• Colour: silver
• Weight [g]: 127
• Manufacturer: GATES PASKI PRZEWODY

• Fitting Position: Rear Axle
• Lisainfo: Top Strut Mounting
• Additional information: Top Strut Mounting

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: JAPKO

Suspension: for vehicles without bad road version, for vehicles without sports suspension

• Construction Year to: 07.2008
• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY
• Lisainfo: 2019076 KAMOKA
• Additional information: 2019076 KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Height [mm]: 30
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 65
• Manufacturer: BGA

• Fitting Position: Front Axle
• Height [mm]: 222
• Weight [kg]: 0.31
• Packaging length [cm]: 22
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Weight [kg]: 0.145
• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 100
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 2
• Manufacturer: FEBEST

• Fitting Position: Front, both sides
• Quality: OE Performance
• Colour: silver
• Weight [g]: 369
• Manufacturer: GATES PASKI PRZEWODY

• Fitting Position: Front Axle
• for OE number: 5038G0
• Manufacturer: SAS

Name: Laager - K„„ndmik. CITROEN P. C4 11.04- / PEUGEOT 307 00- BEZ O½YSKA

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension

• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 100, 72
• Material: Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: FAST

• Fitting Position: Front Axle
• Name: CFD PK0606
• Manufacturer: DACO

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: without ball bearing
• Fitting Position: Front Axle
• Weight [kg]: 0.38
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Fitting Position: Rear Axle

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: GSP

• Fitting Position: Front Axle
• Inner Diameter [mm]: 67
• Outer Diameter [mm]: 99
• Height [mm]: 20
• Shock Absorber Design: Suspension Strut
• Bearing Type: Rolling Bearing
• Name: Laager - K„„ndmik PEUGEO
• Manufacturer: MEY

• for OE number: 9681330980
• Fitting Position: Front Axle
• Required quantity: 2
• Weight [g]: 375
• Supplementary Article/Info 2: without bearing
• Name: IM 36351
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Outer Diameter [mm]: 119, 65
• Inner Diameter [mm]: 14
• Name: Laager - K„„ndmik. PEUGEOT P. 307
• Manufacturer: MAX

• Inner Diameter [mm]: 10
• Material: Aluminium, Rubber/Metal
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 64
• Name: Laager - K„„ndmik. CITROEN T. C4/307 03- L/P
• Manufacturer: MAX

• Height [mm]: 30
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 65, 119
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.38
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. CITROEN P. C4 11.04- / PEUGEOT 307 00- BEZ O½YSKA

• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Alternative Repair Kit: 49357981
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: CORTECO
• Name: COC 49357980

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Laager - K„„ndmik. PEUGEOT P. 307 !!!BEZ O½YSKA!!!

• Material: Aluminium, Rubber/Metal
• Outer Diameter [mm]: 64
• Thickness [mm]: 49.5
• Inner Diameter [mm]: 10
• Fitting Position: Rear Axle
• Weight [kg]: 0.28
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 20
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 72, 100
• Material: Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.172
• Name: Laager - K„„ndmik PEUGEOT 307
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.2006
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Fabrication Number: AD-CT-003
• Manufacturer: NTY
• Name: NTY AD-CT-003

• Fitting Position: Front Axle, both sides
• Weight [kg]: 0.148
• Packaging length [cm]: 14.3
• Packaging width [cm]: 4.1
• Packaging height [cm]: 14.3
• Manufacturer: MONROE

• for OE number: 5038.85
• Fitting Position: Front Axle both sides
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left, right
• Quality class: PJ

Lisainfo: "Tootja: SRL
307 (3A/C), 08.00-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
307 (3A/C), 08.00-
(kvaliteediklass: PJ)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Height [mm]: 30
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 65, 119
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.38
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 62 91 9495

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides
• Supplementary Article/Supplementary Info: without accessories
• Technical Information: Suspension bearing only
• Manufacturer: KYB

Suspension: for vehicles without sports suspension, for vehicles without bad road version Name: Laager - K„„ndmik CHEVROLET P. REZZO/ CITROEN AX, BERLINGO, C15, C2, C3 I, C3 II, C3 PICASSO, C3

• Fitting Position: Right, Left, Front Axle
• Height [mm]: 30
• Inner Diameter 1 [mm]: 14
• Outer Diameter 1 [mm]: 126
• Manufacturer: SNR /NTN-SNR/
• Name: SN KBLF416.15

• Fitting Position: Rear Axle
• Name: CFD PK0607
• Manufacturer: DACO

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• for OE number: 514232
• Fitting Position: Rear Axle
• Weight [g]: 287
• Name: IM 36353
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Article number of recommended accessories: 513931, 534068
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Height [mm]: 50
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 64
• Material: Aluminium, Rubber/Metal
• Fitting Position: Rear Axle
• Hole Spacing [mm]: 100.5
• Weight [kg]: 0.28
• Supplementary Article/Info 2: without ball bearing
• Name: Laager - K„„ndmik. CITROEN T. C4
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Rear Axle
• Manufacturer: AUTOFREN REPERATURKI
• Name: SE D5-024

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles with standard suspension
• Quality class: PJ
• Name: Shock absorber protection kit left+right

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Material: PU (Polyurethane), Thermoplast
• Weight [g]: 219
• Component Number: 4
• Name: IM 50411
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• Material: Rubber, Thermoplast
• Weight [g]: 255
• Component Number: 4
• Name: IM 50225
• Manufacturer: ORIGINAL IMPERIUM

• Engine Code: EW10A
• Fitting Position: Front Axle
• Quantity per axle: 1
• General Information: Twin Pack for axle repair
• Name: Laager - K„„ndmik PEUGEOT 307 - 2SZT!
• Manufacturer: SKF
• Lisainfo: VKD 35002 T SKF
• Additional information: VKD 35002 T SKF

• Fitting Position: Front Axle
• for OE number: 503370
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT
• Additional information: D5029
• Lisainfo: D5029

• Inner Diameter [mm]: 10
• Height [mm]: 50
• Outer Diameter [mm]: 64
• Material: Aluminium, Rubber/Metal
• Fitting Position: Rear Axle
• Hole Spacing [mm]: 100.5
• Weight [kg]: 0.28
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 62 93 0030
• Lisainfo: 62 93 0030 SWA
• Additional information: 62 93 0030 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height of bump stop [mm]: 96
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik CITROEN/PEUGEOT/RENAUL
• Manufacturer: SAA

for OE number: 3637192, 5035 19, 5035 23, 5035 27, 5035 58, 5035 63, 54612-1G010, 54612-2C000, 91510633 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with bearing
• Name: Laager - K„„ndmik. PEUGEOT P. 307 Z O½YSKIEM!!!
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik CITROEN P. AX
• Manufacturer: LMI

for OE number: 3637192, 5035 19, 5035 23, 5035 27, 5035 58, 5035 63, 54612-1G010, 54612-2C000, 91510633 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 814012410

• Fitting Position: Front Axle Left, Front Axle Right
• Diameter 1/ Diameter 2 [mm]: 62,6x100,00
• Height 1 [mm]: 20
• Quantity per axle: 2
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Manufacturer: FAST

• Engine Code: EW10A
• Fitting Position: Rear Axle
• Height [mm]: 49.5
• Required quantity: 2
• Outer Diameter [mm]: 64
• Centering Diameter [mm]: 10
• Supplementary Article/Info 2: without ball bearing
• for OE number: 5142 30, 5142 32, 5142 34
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Weight [kg]: 0.59
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: METALCAUCHO

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. CITROEN T. C4
• Manufacturer: MEY

• Fitting Position: Right, Left, Rear Axle
• Outer Diameter 1 [mm]: 62
• Width 1 [mm]: 52
• Manufacturer: SNR /NTN-SNR/

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB
• Additional information: 910095 KYB
• Lisainfo: 910095 KYB

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Length [mm]: 185
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.236
• Name: Puhver, vedrustus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Weight [kg]: 0.3
• Supplementary Article/Info 2: without bearing
• Warranty: 5 years warranty
• Packaging length [cm]: 9.6
• Packaging width [cm]: 8.3
• Packaging height [cm]: 8.2
• Manufacturer: MONROE