Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front,
both sides - Quality: OE Performance
- Colour: silver
- Weight [g]: 55
- Manufacturer: GATES PASKI PRZEWODY
- Fitting Position: Front Axle
- Weight [kg]: 0.1
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper - Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [g]: 53
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 64
- Name: IM 32989
- Manufacturer: ORIGINAL IMPERIUM
- Inner Diameter [mm]: 14.3
- Outer Diameter [mm]: 63.5
- Fitting Position: Front Axle
- Weight [kg]: 0.1
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 47574
- Thickness [mm]: 23
- Outer Diameter [mm]: 79
-
Material: Plastic,
Rubber -
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 47578
- Thickness [mm]: 40
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 82
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower - Weight [kg]: 0.06
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 40
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 82
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower - Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Length [mm]: 345
- Outer Diameter [mm]: 113
- Wire Diameter [mm]: 10
- for OE number: 1K0407183E
- Manufacturer: KAMOKA
-
Fitting Position: Upper,
Front Axle -
Material: PU
(Polyurethane) - Required quantity: 2
- Name: TG 00519669
- Manufacturer: TEDGUM
- Fitting Position: Rear Axle
- Length [mm]: 345
- Outer Diameter [mm]: 112
- Thickness [mm]: 10.75
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Length [mm]: 442
- Parameter: AC
- Spring Design: Coil Spring
- Outer Diameter [mm]: 169
- Thickness 1 [mm]: 12.8
- Name: CFD 802831
- Manufacturer: DACO
- reinforced version:
- Fitting Position: Rear Axle
- Length [mm]: 357
- Outer Diameter [mm]: 113
- Thickness [mm]: 11
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- not for equipment code: VTR
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Front Axle
- Length [mm]: 442
- Outer Diameter [mm]: 169
- Thickness [mm]: 12.75
- Manufacturer: JAPKO
- Name: Coil spring
- Quality class: PJ
Lisainfo: "Tootja: TEVEMA
CITROEN C4
(kvaliteediklass: PJ)"
- Name: Coil spring
- Quality class: PJ
Lisainfo: "Tootja: TEVEMA
PEUGEOT 307 00-
(kvaliteediklass: PJ)"
- Length [mm]: 345
- Outer Diameter [mm]: 110
- Fitting Position: Rear Axle
- Weight [kg]: 1.5
- Wire Diameter [mm]: 10.8
- Replace in pairs only:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Parameter: E
- Spring Design: Coil Spring
- Weight [kg]: 1.48
- Thickness 1 [mm]: 10.8
- Outer Diameter [mm]: 112
- Length [mm]: 345
- Manufacturer: KAYABA SPRʯYNY
- Name: KY RH6621
- Transmission Type: Automatic Transmission
- Fitting Position: Front Axle
- Spring Design: Coil spring with constant wire diameter
- Thickness [mm]: 12.75
- Outer Diameter [mm]: 169
- Length [mm]: 443
- Manufacturer: JP GROUP
- Lisainfo: Coil Spring
- Additional information: Coil Spring
Vehicle Equipment: for vehicles with panorama sunroof, for vehicles without panorama sunroof
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Length [mm]: 333
- Weight [kg]: 1.64
- Spring Design: Coil spring with constant wire diameter
- Outer Diameter [mm]: 112
- Warranty: 5 years warranty
- Packaging length [cm]: 43
- Packaging width [cm]: 15
- Packaging height [cm]: 15
- Wire Diameter [mm]: 10.8
- Manufacturer: MONROE
- Name: Coil spring
- Quality class: PJ
Lisainfo: "Tootja: TEVEMA
PEUGEOT 307
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Manufacturer: KILEN
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Spring Design: Coil Spring
- Replace in pairs only:
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- reinforced version:
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left -
Manufacturer: AUTO-
GH
- reinforced version:
- Fitting Position: Rear Axle
- Parameter: E
- Spring Design: Coil Spring
- Weight [kg]: 1.68
- Thickness 1 [mm]: 11
- Outer Diameter [mm]: 113
- Length [mm]: 357
- Manufacturer: KAYABA
- Name: Coil spring
- Quality class: Q
Lisainfo: "Tootja: SUPLEX
PEUGEOT 307
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Parameter: AC
- Spring Design: Coil Spring
- Weight [kg]: 2.46
- Thickness 1 [mm]: 12.8
- Outer Diameter [mm]: 169
- Length [mm]: 442
- Manufacturer: KAYABA SPRʯYNY
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Length [mm]: 445
- Weight [kg]: 2.9
- Outer Diameter [mm]: 173
- Inner Diameter 1 [mm]: 81
- Inner Diameter 2 [mm]: 149
- Warranty: 5 years warranty
- Number of coils: 5.5
- Packaging length [cm]: 55
- Packaging width [cm]: 17.9
- Packaging height [cm]: 18
- Wire Diameter [mm]: 12.8
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Length [mm]: 442
- Outer Diameter [mm]: 169
- Fitting Position: Front Axle
- Weight [kg]: 2.46
- Wire Diameter [mm]: 12.8
- Replace in pairs only:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Length [mm]: 444
- Weight [kg]: 2.73
- Spring Design: Coil spring with constant wire diameter
- Outer Diameter [mm]: 170
- Warranty: 5 years warranty
- Packaging length [cm]: 50
- Packaging width [cm]: 18.5
- Packaging height [cm]: 18.5
- Wire Diameter [mm]: 12.8
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Manufacturer: KILEN
- Vehicle Equipment: for vehicles without panorama sunroof
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
-
Name: BI 36-
199808
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- reinforced version:
- Length [mm]: 361
- Weight [kg]: 1.9
- Inner Diameter 1 [mm]: 56
- Inner Diameter 2 [mm]: 56
- Warranty: 5 years warranty
- Number of coils: 7.7
- Packaging length [cm]: 40.6
- Packaging width [cm]: 16.7
- Packaging height [cm]: 16.8
- Wire Diameter [mm]: 11.1
- Manufacturer: MONROE
- Name: Coil spring
- Quality class: Q
Lisainfo: "Tootja: SUPLEX
307 HB/SW, 03.01-/CC
(kvaliteediklass: Q)"
- Vehicle Equipment: for vehicles without panorama sunroof
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Manufacturer: BILSTEIN
-
Name: BI 36-
199747
- Name: Coil spring
- Quality class: Q
Lisainfo: "Tootja: SUPLEX
PEUGEOT 307
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Length [mm]: 443
- Outer Diameter [mm]: 169
- Diameter [mm]: 12.75
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks