• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP

Lisainfo: Friction Bearing, suspension strut support mounting Additional information: Friction Bearing, suspension strut support mounting

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without bearing
• Manufacturer: JP GROUP
• Lisainfo: Suspension Strut Support Bearing
• Additional information: Suspension Strut Support Bearing

• Fitting Position: Front Axle
• Height [mm]: 222
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 100
• Fabrication Number: AD-KA-324
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY
• Name: NTY AD-KA-324

• Fitting Position: Right, Front Axle
• Inner Diameter 1 [mm]: 65
• Width 1 [mm]: 20
• Outer Diameter 1 [mm]: 100
• Manufacturer: SNR
• Name: SN M259.01
• Additional information: M259.01 SNR
• Lisainfo: M259.01 SNR

• Fitting Position: Front Axle
• reinforced version:
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Laager,amorditugilaager
• Manufacturer: FAG

• Vehicle type: M49
• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without power steering
• Quantity per axle: 2
• Name: Laager - K„„ndmik RENAULT
• Manufacturer: SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.155
• Inner Diameter [mm]: 66.5
• Outer Diameter [mm]: 99
• Width [mm]: 20
• Manufacturer: 3RG

• Fitting Position: Front Axle
• Weight [g]: 151
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 20
• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 99
• Name: IM 36231/1
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Height [mm]: 222
• Weight [kg]: 0.31
• Packaging length [cm]: 22
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Manufacturer: FEBEST

• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 100, 72
• Material: Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: FAST

• Fitting Position: Front Axle
• for OE number: 503323
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Thickness [mm]: 20
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 72, 100
• Material: Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.172
• Name: Laager - K„„ndmik PEUGEOT 307
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Diameter [mm]: 18
• Weight [kg]: 0.395
• reinforced version:
• Packaging length [cm]: 22
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension

• Fitting Position: Front Axle
• Height [mm]: 20
• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 100
• Manufacturer: OPTIMAL ZAWIESZENIE

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
(kvaliteediklass: Q)"

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: AD-CT-002

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Name: CFD PK3700
• Manufacturer: DACO

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Name: CFD PK2331
• Manufacturer: DACO

• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
PEUG./CITR./MERC.
(kvaliteediklass: PJ)"

• Vehicle type: M49
• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with power steering
• Quantity per axle: 1
• General Information: Twin Pack for axle repair
• Name: Laager - K„„ndmik PEUGEOT 307 - 2SZT!
• Manufacturer: SKF
• Lisainfo: VKD 35002 T SKF
• Additional information: VKD 35002 T SKF

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Weight [kg]: 0.4
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik CITROEN/PEUGEOT/RENAUL
• Manufacturer: SAA

for OE number: 3637192, 5035 19, 5035 23, 5035 27, 5035 58, 5035 63, 54612-1G010, 54612-2C000, 91510633 SVHC: No information available, please contact the manufacturer!

• Vehicle type: M49
• Vehicle Equipment: for vehicles without power steering
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without bearing
• Manufacturer: JP GROUP
• Lisainfo: Suspension Strut Support Bearing
• Additional information: Suspension Strut Support Bearing

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik CITROEN P. AX
• Manufacturer: LMI

for OE number: 3637192, 5035 19, 5035 23, 5035 27, 5035 58, 5035 63, 54612-1G010, 54612-2C000, 91510633 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Diameter 1/ Diameter 2 [mm]: 62,6x100,00
• Height 1 [mm]: 20
• Quantity per axle: 2
• Manufacturer: METZGER

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Name: Laager - K„„ndmik. CITROEN XSARA
• Manufacturer: MAX

• Vehicle Equipment: for vehicles with power steering
• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Outer Diameter [mm]: 109, 88
• Inner Diameter [mm]: 14
• Name: Laager - K„„ndmik. CITROEN/PEUG
• Manufacturer: MAX

• for RPO number from: 09457
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: 3RG

• Vehicle Equipment: for vehicles with power steering
• Length [mm]: 167
• Width [mm]: 147
• Height [mm]: 50
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 88, 109
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.88
• Supplementary Article/Info 2: without ball bearing
• Name: Laager - K„„ndmik. CITROEN PARTNER
• Manufacturer: FEB
• Additional information: F17803
• Lisainfo: F17803

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Front Axle
• Height [mm]: 49
• Width 1 [mm]: 147
• Length [mm]: 167
• Manufacturer: SNR /NTN-SNR/
• Name: SN KBLF410.97

• Fitting Position: Front Axle
• Material: PU (Polyurethane)
• Weight [kg]: 0.05
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for RPO number up to: 10464
• Length [mm]: 167
• Width [mm]: 147
• Height [mm]: 50
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 88, 109
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.97
• Supplementary Article/Info 2: with ball bearing
• Name: Laager - K„„ndmik. CITROEN PARTNER Z O½YSKIEM
• Manufacturer: FEB
• Additional information: F22130
• Lisainfo: F22130

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without power steering
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.9
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Fitting Position: Front Axle
• Weight [kg]: 1.06
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles with power steering
• Length [mm]: 167
• Width [mm]: 147
• Height [mm]: 50
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 88, 109
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.9
• Supplementary Article/Info 2: without ball bearing
• Name: SW 62 54 0017
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without power steering
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.9
• Supplementary Article/Info 2: without ball bearing
• Name: SW 62 54 0016
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for RPO number up to: 10464
• Length [mm]: 167
• Width [mm]: 147
• Inner Diameter [mm]: 14
• Height [mm]: 50
• Outer Diameter [mm]: 88, 109
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.97
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: SWAG
• Name: SW 62 92 2130
• Lisainfo: 62 92 2130 SWA
• Additional information: 62 92 2130 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• for OE number: 546122C000
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without power steering
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 814000710

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.99
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Lisainfo: 62 54 0005 SWA
• Additional information: 62 54 0005 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for OE number: 503878
• Name: Laager - K„„ndmik. CITROEN/PEUGEOT
• Manufacturer: SAS

• Vehicle type: M49
• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with power steering
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Name: Laager - K„„ndmik. CITROEN XARA PICASSO L/P 00-
• Manufacturer: SKF

• Fitting Position: Right, Front Axle
• Supplementary Article/Info 2: with rubber mount
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR
• Name: SN KB659.06

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 1.06
• Supplementary Article/Info 2: with ball bearing
• Name: Laager - K„„ndmik. CITROEN XARA PICASSO 00- LE/PR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with heavy duty suspension
• Block Separation:
• for RPO number from: 09856
• Vehicle Equipment: for vehicles with power steering
• Axle Load front axle to [kg]: 600
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 1.06
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: SWAG
• Lisainfo: 62 55 0004 SWA
• Additional information: 62 55 0004 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for RPO number up to: 10464
• Fitting Position: Front Axle
• Weight [kg]: 1.136
• Supplementary Article/Info 2: with ball bearing
• Supplementary Article/Supplementary Info: with attachment material
• Name: Laager - K„„ndmik. CITROEN XARA PICASSO L/P 00-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without power steering
• SVHC: No SVHC present!
• Name: LU 815000430
• Manufacturer: FAG

• Fitting Position: Front Axle
• Weight [kg]: 0.581
• Packaging length [cm]: 11.9
• Packaging width [cm]: 11.9
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Vehicle Equipment: for vehicles with power steering
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5031 73
• Name: Laager - K„„ndmik. CITROEN ZX/BERL/PART ZE WSP.
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Vehicle Equipment: for vehicles with power steering
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5031 73
• Name: Laager - K„„ndmik. CITROEN PARTNER Z O½YSKIEM
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Vehicle type: M59
• Fitting Position: Front Axle
• Quantity per axle: 1
• Supplementary Article/Info 2: with bearing
• General Information: Twin Pack for axle repair
• Name: Laager - K„„ndmik. CITROEN XARA PICASSO 00- 2 SZT.
• Manufacturer: SKF

• Construction Year from: 12.2002
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Suspension: for vehicles with bad road version
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• Manufacturer: METZGER