Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 21
- Lisainfo: Stabiliser Mounting
- Additional information: Stabiliser Mounting
- Fitting Position: Front Axle
- Weight [kg]: 0.111
- Inner Diameter [mm]: 25
- Packaging length [cm]: 5
- Packaging width [cm]: 5
- Packaging height [cm]: 4.8
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Weight [kg]: 0.104
- Inner Diameter [mm]: 24
- Packaging length [cm]: 5
- Packaging width [cm]: 5
- Packaging height [cm]: 4.7
- Manufacturer: FEBEST
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 21
- Inner Diameter [mm]: 19.5
- Length [mm]: 45
- Width [mm]: 46
- Height [mm]: 51
- for OE number: 509465
-
Name: Paigutus -
Kndmik PEUGEOT P. 306/ BERL - Manufacturer: SAS
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 21
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.09
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Stabiliser Bar Diameter [mm]: 21
- Inner Diameter [mm]: 21
- Material: Rubber
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.08
-
Name: Paigutus -
Kndmik PEUGEOT P. 306/ PART - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819006810
- Stabiliser Bar Diameter [mm]: 21
- Inner Diameter [mm]: 21
- Material: Rubber
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.08
- Manufacturer: SWAG
- Name: SW 62 61 0006
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 22
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: Front Axle Right,
Front Axle Left - Name: COC 49397921
- Manufacturer: CORTECO
- Fitting Position: Front Axle
- Diameter [mm]: 21
- Inner Diameter 1 [mm]: 21
- Outer Diameter 1 [mm]: 46.5
- Thickness 1 [mm]: 50
- Manufacturer: DELPHI
- Name: DE TD701W
- Stabiliser Bar Diameter [mm]: 22
- Inner Diameter [mm]: 22
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.08
-
Name: Paigutus -
Kndmik PEUGEOT P. 306/ BERL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 21
- Required quantity: 2
-
Name: Paigutus -
Kndmik PEUGEOT P. 306/ BERL - Manufacturer: MEY
- Fitting Position: Front Axle both sides
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 19
- Weight [kg]: 0.092
- Length [mm]: 44.8
- Manufacturer: RTS
- Stabiliser Bar Diameter [mm]: 22
- Inner Diameter [mm]: 22
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.08
- Manufacturer: SWAG
- Name: SW 62 92 1818
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter [mm]: 22
- Inner Diameter 1 [mm]: 22
- Thickness 1 [mm]: 45
- Manufacturer: DELPHI
- Fitting Position: Front Axle both sides
- Required quantity: 2
-
Inner Diameter [mm]: 22,
20.5 - paired article number: VKDS 353045
- Length [mm]: 52
- Height [mm]: 45
- Outer Diameter [mm]: 46
- Name: SK VKDS353045
- Manufacturer: SKF
- Fitting Position: Front Axle
- Diameter [mm]: 23
- Weight [kg]: 0.11
- Inner Diameter [mm]: 23
- Packaging length [cm]: 5
- Packaging width [cm]: 5
- Packaging height [cm]: 4.6
- Manufacturer: FEBEST
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 21
- paired article number: VKDS 353041
- Name: SK VKDS353041
- Manufacturer: SKF
-
Fitting Position: Front Axle both sides,
inner - Inner Diameter [mm]: 21
- Outer Diameter [mm]: 47
- Length [mm]: 45
- paired article number: 270471
- Weight [kg]: 0.1
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks