• Fitting Position: Front Axle
• Fabrication Number: KLP-HY-513
• Manufacturer: NTY

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Width [mm]: 37
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Fabrication Number: KLP-HY-505
• Manufacturer: NTY
• Name: NTY KLP-HY-505

• Construction Year to: 09.2011
• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Construction Year to: 09.2011
• Width [mm]: 37
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right, outer
• Width [mm]: 37
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Net weight [kg]: 0.67
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• Inner Diameter [mm]: 38
• Bearing Type: Angular Ball Bearing
• Width [mm]: 37
• Outer Diameter [mm]: 70
• Supplementary Article/Info 2: with retaining ring
• Weight [kg]: 0.693
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Width [mm]: 37
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Construction Year to: 09.2011
• Fitting Position: Front Axle
• Required quantity: 2
• Parameter: DP2010.10.0116
• Width [mm]: 37
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Manufacturer: DRIVE

• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Width [mm]: 37
• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Width [mm]: 37
• Fitting Position: Front Axle
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: JPA
• Lisainfo: KK-10505
• Additional information: KK-10505

• Construction Year to: 09.2011
• Supplementary Article/Info 2: with retaining ring
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Width [mm]: 37
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Width [mm]: 37
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.57
• Supplementary Article/Info 2: with retaining ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG
• Lisainfo: 713 6195 10 FAG
• Additional information: 713 6195 10 FAG

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRONT LR+FR
• for OE number: 5172002000
• Number of bores: 38
• Width [mm]: 38
• Diameter 2 [mm]: 1
• Name: DA KWD1043
• Manufacturer: DAYCO

• Construction Year to: 09.2011
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with attachment material
• Inner Diameter [mm]: 37
• Outer Diameter [mm]: 70
• Height [mm]: 38
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Production date from: 20031201
• Fitting Position: Front Axle both sides
• Weight [kg]: 0.595
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Packaging length [cm]: 7
• Packaging width [cm]: 7
• Packaging height [cm]: 3.9
• Manufacturer: FEBEST

• Construction Year to: 09.2011
• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Right, Left, Front Axle
• Manufacturer: SNR
• Name: SN R184.05

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with attachment material
• Inner Diameter [mm]: 38
• Outer Diameter [mm]: 70
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Right, Left, Front Axle
• Width 1 [mm]: 37
• Inner Diameter 1 [mm]: 70
• Outer Diameter 1 [mm]: 38
• Manufacturer: SNR

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-HY-528
• Manufacturer: NTY

Supplementary Article/Info 2: with wheel hub, with wheel studs, with integrated ABS sensor

• Construction Year to: 09.2011
• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Rim Hole Number: 4
• Flange Ø [mm]: 140
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Rim Hole Number: 4
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 140
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Construction Year to: 09.2011
• Fitting Position: Rear
• Outer Diameter [mm]: 140
• Braking/Drive Dynamics: for vehicles with ABS
• Weight [kg]: 3.15
• Number of Holes: 4
• Bolt Hole Circle Ø 1 [mm]: 100
• Warranty: 4 years warranty
• Name: CE 29SKV120
• Manufacturer: ESEN SKV

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle both sides
• Rim Hole Number: 4
• Outer Diameter [mm]: 140
• Bolt Hole Circle Ø [mm]: 100
• Number of pins: 2
• Connector Shape: rectangular
• Number of flange connections: 4
• Quantity per axle: 2
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with ABS sensor ring, Wheel Bearing integrated into wheel hub, with studs General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 09.2011
• Fitting Position: Rear Axle
• Required quantity: 2
• Braking/Drive Dynamics: for vehicles with ABS
• Parameter: DP2010.10.0548
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Construction Year to: 09.2011
• Braking/Drive Dynamics: for vehicles with ABS
• Rim Hole Number: 4
• Flange Ø [mm]: 140
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: -ABS
• Braking/Drive Dynamics: for vehicles without ABS
• Width [mm]: 85
• Supplementary Article/Info 2: without integrated ABS sensor
• Diameter 2 [mm]: 1
• Inner Diameter 2 [mm]: 4
• Name: DA KWD1252
• Manufacturer: DAYCO

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 140
• Outer Diameter 2 [mm]: 62.3
• Outer Diameter 1 [mm]: 66.3
• Width 2 [mm]: 57.9
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Rim Hole Number: 4
• Width [mm]: 131.2
• Outer Diameter [mm]: 140
• Width 2 [mm]: 58
• Outer Diameter 2 [mm]: 67
• Number of mounting bores: 4
• Manufacturer: OPTIMAL

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring

• Construction Year to: 09.2011
• Braking/Drive Dynamics: for vehicles with ABS
• Rim Hole Number: 4
• Fitting Position: Rear Axle
• Width [mm]: 58
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 67
• Outer Diameter 2 [mm]: 140
• Name: Rattalaagrikomplekt
• Manufacturer: KAV

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with integrated wheel bearing
• Outer Diameter [mm]: 140
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Rim Hole Number: 4
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

• Construction Year to: 09.2011
• Fitting Position: Rear Axle
• Required quantity: 2
• Braking/Drive Dynamics: for vehicles without ABS
• Flange Ø [mm]: 140
• Rim Hole Number: 4
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Right, Left, Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• No. of holes 1: 4
• No. of holes 2: 4
• Name: SN R184.17
• Manufacturer: NTN-SNR

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 4
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 96
• Outer Diameter [mm]: 140
• Supplementary Article/Info 2: with integrated ABS sensor
• Version: One
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 140
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Rim Hole Number: 4
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated ABS sensor, with integrated wheel bearing

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 140
• Outer Diameter 2 [mm]: 62.5
• Outer Diameter 1 [mm]: 66.6
• Width 2 [mm]: 58
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Right, Left, Rear Axle
• Mounting Type: Glued
• Rim Hole Number: 4
• Number of Holes: 4
• Supplementary Article/Info 2: with rubber mount
• Outer Diameter 1 [mm]: 140
• Width 1 [mm]: 130
• Manufacturer: SNR

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: REAR LR+RE
• for OE number: 527501G101
• Width [mm]: 85
• Supplementary Article/Info 2: with integrated ABS sensor
• Diameter 2 [mm]: 1
• Inner Diameter 2 [mm]: 4
• Name: DA KWD1478
• Manufacturer: DAYCO

• Construction Year to: 09.2011
• Fitting Position: Rear Axle
• Required quantity: 2
• Braking/Drive Dynamics: for vehicles with ABS
• Flange Ø [mm]: 140
• Rim Hole Number: 4
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: SKF
• Name: SK VKBA6809