Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of Teeth: 48
- Width [mm]: 8
- Inner Diameter [mm]: 62
- Outer Diameter [mm]: 76
-
Fabrication Number: NZA-
MS- 003 - Manufacturer: NTY
-
Lisainfo:
48 T 76 MM /62 MM / 8 MM -
Additional information:
48 T 76 MM /62 MM / 8 MM
Fitting Position: Front Axle, Wheel Side, Front Axle Left, Front Axle Right
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle,
Front Axle both sides - Outer Diameter [mm]: 86.8
- Inner Diameter [mm]: 75.7
- Width [mm]: 8
- Number of Teeth, ABS ring: 44
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Inner Diameter [mm]: 75.7
- Width [mm]: 8
- Outer Diameter [mm]: 86.8
- Number of Teeth, ABS ring: 44
-
Name: ANDUR,
ABS - Manufacturer: TRI
-
Lisainfo: HYUNDAI,
KIA -
Additional information: HYUNDAI,
KIA
- Fitting Position: Front Axle
- Inner Diameter [mm]: 62
- Outer Diameter [mm]: 76
- Width [mm]: 8
- Number of Teeth: 48
-
Name: Andur,
ABS - Manufacturer: MAX
- Fitting Position: Front Axle both sides
- Width [mm]: 8
- Number of Teeth, ABS ring: 48
- Inner Diameter [mm]: 62
- Outer Diameter [mm]: 76
- Weight [kg]: 0.073
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 62
- Outer Diameter [mm]: 76
- Material: Steel
- Number of Teeth, ABS ring: 48
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.072
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle Right
- Manufacturer: JAPKO
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: HCA-
NS- 033
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle Left
- Manufacturer: JAPKO
- for OE number: 91921 1G000
- Cable Length [mm]: 700
- Number of pins: 2
- Fitting Position: Rear Axle Right
-
Fabrication Number: HCA-
KA- 328 -
paired article number: HCA-
KA- 327 - Manufacturer: NTY
-
Name: NTY HCA-
KA- 328
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 91920 1G000
- Cable Length [mm]: 700
- Number of pins: 2
- Fitting Position: Rear Axle Left
-
Fabrication Number: HCA-
KA- 327 -
paired article number: HCA-
KA- 328 - Manufacturer: NTY
-
Name: NTY HCA-
KA- 327
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Inner Diameter [mm]: 62
- Width [mm]: 8
- Outer Diameter [mm]: 76
- Number of Teeth, ABS ring: 48
-
Name: ANDUR,
ABS - Manufacturer: TRI
- Lisainfo: HYUNDAI
- Additional information: HYUNDAI
- Fitting Position: Front Axle Left
- Manufacturer: ASHIKA
- Fitting Position: Rear Axle Right
- Length [mm]: 730
- Cable Length [mm]: 700
- Number of pins: 2
- Colour: black
- Warranty: 3 years warranty
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 125
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 06SKV475
- Fitting Position: Front Axle Right
- Manufacturer: ASHIKA
- Fitting Position: Rear Axle Right
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: JPA
- Fitting Position: Front Axle Left
- Sensor Type: Active sensor
-
Length [mm]: 1,
100 - Socket colour: black
- Manufacturer: JP GROUP
- Fitting Position: Front Axle Right
- Sensor Type: Active sensor
-
Length [mm]: 1,
080 - Socket colour: black
- Manufacturer: JP GROUP
- Fitting Position: Rear Axle Left
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: JPA
-
Additional information: ABS-
K47 JP -
Lisainfo: ABS-
K47 JP
- Fitting Position: Front Axle Right
-
Fabrication Number: HCA-
KA- 304 -
paired article number: HCA-
KA- 305
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Left
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: JPA
- Required quantity: 1
- Fitting Position: Front Axle Left
- Supplementary Article/Info 2: with cable
- Manufacturer: BREMI
- Fitting Position: Front Axle Right
- Manufacturer: JAPANPARTS
- Braking/Drive Dynamics: for vehicles with ABS
- Rated Voltage [V]: 12
- Weight [kg]: 0.138
- Fitting Position: Front Axle Right
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Overall Length [mm]: 820
- Socket colour: white
- Cable Length [mm]: 740
- paired article number: 31422
- Weight [kg]: 0.17
- Manufacturer: A.B.S.
- Fitting Position: Front Axle Left
-
Overall Length [mm]: 1,
140 - Length [mm]: 28
- Sensor Type: Active sensor
- Socket colour: black
-
Cable Length [mm]: 1,
060 - paired article number: 30855
- Weight [kg]: 0.2
- Manufacturer: A.B.S.
- paired article number: 33 10 9995
- Number of connectors: 1
- Fitting Position: Front Axle Left
-
Cable Length [mm]: 1,
080 - Weight [kg]: 0.132
- Name: SW 33 10 5870
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Braking/Drive Dynamics: for vehicles with ABS
- Rated Voltage [V]: 12
- Weight [kg]: 0.12
- Fitting Position: Rear Axle Right
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Right
-
Overall Length [mm]: 1,
125 - Length [mm]: 28
- Sensor Type: Active sensor
- Socket colour: black
- Weight [kg]: 0.22
-
Cable Length [mm]: 1,
045 - Manufacturer: A.B.S.
- paired article number: ADBP710126
- Number of connectors: 1
- Fitting Position: Front Axle Left
-
Cable Length [mm]: 1,
080 - Weight [kg]: 0.132
-
Name: Andur,
rattaprete arv - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Left
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Cable Length [mm]: 1,
100 - Manufacturer: DELPHI LOCKHEED HAMULCE
- Fitting Position: Front Axle Right
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Cable Length [mm]: 1,
100 - Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE SS20513
- Number of pins: 2
- Fitting Position: Rear Axle Right
- Cable Length [mm]: 700
- Fitting Position: Front Axle Right
-
Cable Length [mm]: 1,
080 - Number of pins: 2
- Fitting Depth [mm]: 28
- Resistor M[ohm]: 13
- Manufacturer: ERA
-
Braking/Drive Dynamics: for vehicles with ABS,
for vehicles without ABS - Required quantity: 1
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: with cable
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Manufacturer: BREMI
- Fitting Position: Front Axle Right
- Braking/Drive Dynamics: for vehicles with ABS
- Required quantity: 1
-
Cable Length [mm]: 1,
100 - Fitting Depth [mm]: 28
- Number of pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Fitting Position: Front Axle Left
- Required quantity: 1
-
Cable Length [mm]: 1,
100 - Fitting Depth [mm]: 28
- Number of pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Fitting Position: Front Axle Right
- Braking/Drive Dynamics: for vehicles with ABS
- Rated Voltage [V]: 12
- Weight [kg]: 0.144
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks