Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
for PR number: 1JP,
UA4, UC1 - Block Separation:
- Construction Year from: 07.2009
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 21
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Rear Axle both sides
- Material: Sheet Steel
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.005
-
Name: KINNITUS,
STABILISAATORIPAIGUTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear
- Inner Diameter 1 [mm]: 17
- Inner Diameter 2 [mm]: 19
- Fitting Position: Rear Axle
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Rear Axle,
inner - Required quantity: 2
-
Name: Kinnitus,
stabilisaator - Manufacturer: TRI
- Fitting Position: Rear Axle
- Weight [kg]: 0.173
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Stabiliser Bar Diameter [mm]: 21.7
- Production date to: 22.06.2009
- Fitting Position: Front Axle Left
-
Mounting Type: Rubber-
Metal Mount - Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
for PR number: UA4,
1JP, UC1 - Block Separation:
- Construction Year from: 07.2009
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Stabiliser Bar Diameter [mm]: 21
- Inner Diameter [mm]: 21
-
Name: Paigutus -
Kndmik VW T. A3/ GOLF5/ OCTA - Manufacturer: MAX
-
Lisainfo: MGZ-
201024 -
Additional information: MGZ-
201024
- Construction Year to: 06.2009
- for PR number: UC1
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 22
- Stabiliser Bar Diameter [mm]: 22
-
Name: Kinnitus,
stabilisaator - Manufacturer: MAX
- Stabiliser Bar Diameter [mm]: 20.7
- Inner Diameter [mm]: 20.7
- Fitting Position: Rear Axle both sides
- Weight [kg]: 0.08
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 20.7
- Inner Diameter [mm]: 19.2
- Length [mm]: 48
- Width [mm]: 40
- Height [mm]: 43
- for OE number: 1K0511327AR
- Manufacturer: SASIC
-
for combined PR number: UA4,
1JP - Fitting Position: Rear Axle
- Diameter [mm]: 21
- Weight [kg]: 0.08
- Packaging length [cm]: 4.7
- Packaging width [cm]: 4.3
- Packaging height [cm]: 4.1
- Manufacturer: FEBEST
- Quantity: 2
-
Fitting Position: Rear Axle,
Rear Axle both sides - Weight [kg]: 0.005
- Required quantity: 2
- General Information: clamp
- Manufacturer: VIKA
- Stabiliser Bar Diameter [mm]: 21
- Fitting Position: Rear Axle
- Inner Diameter 1 [mm]: 17
- Weight [kg]: 0.023
- Inner Diameter 2 [mm]: 19
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 21
- Fitting Position: Rear Axle
- Inner Diameter 1 [mm]: 16.5
- Weight [kg]: 0.069
- Inner Diameter 2 [mm]: 18.5
-
Name: Paigutus -
Kndmik VW T. A3/ GOLF5/ OCTA - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle both sides,
inner - Inner Diameter [mm]: 17
- Outer Diameter [mm]: 40
- Length [mm]: 40
- paired article number: 270846
- Weight [kg]: 0.07
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Stabiliser Bar Diameter [mm]: 21
- Fitting Position: Rear Axle
- Inner Diameter 1 [mm]: 16.5
- Weight [kg]: 0.069
- Inner Diameter 2 [mm]: 18.5
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 16.2
- Length [mm]: 43.4
- Weight [kg]: 0.062
- Manufacturer: RTS
- Engine Code: CBAB
- Construction Year to: 06.2009
- Stabiliser Bar Diameter [mm]: 22
- for PR number: UC1
- Inner Diameter [mm]: 19
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.068
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CBAB
- Construction Year to: 06.2009
- Stabiliser Bar Diameter [mm]: 22
- for PR number: UC1
- Inner Diameter [mm]: 19
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.068
-
Name: Paigutus -
Kndmik VW T. GOLF5/ PASSAT/ - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1K0511327AR
- Fitting Position: Rear
- Required quantity: 2
- Weight [g]: 78
- Inner Diameter [mm]: 21
- Name: IM 32420
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 19
- Length [mm]: 40
- Width [mm]: 47
- Height [mm]: 43
- Name: ALT 94368AL
- Manufacturer: ALTE AUTOMOTIVE
- Engine Code: CBAB
- Construction Year to: 06.2009
- Stabiliser Bar Diameter [mm]: 22
- for PR number: UC1
- Inner Diameter [mm]: 19
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.068
- Manufacturer: SWAG
- Name: SW 30 93 2625
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 23.6
-
Fitting Position: inner,
Front Axle - Required quantity: 2
- Manufacturer: TED
Name: Paigutus - Kndmik VW P. GOLF 03- /JETTA 05-/ TOURAN 03- 23,6MM
- Fitting Position: Rear Axle
- Weight [g]: 68
- Inner Diameter [mm]: 22
- Name: IM 35156
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- Stabiliser Bar Diameter [mm]: 20.7
- paired article number: VKDS 451002
- Name: SK VKDS451002
- Manufacturer: SKF
- Fitting Position: Front Axle
- Weight [g]: 91
- Inner Diameter [mm]: 21
- Name: IM 34204
- Manufacturer: ORIGINAL IMPERIUM
- Additional information: IM 34204
- Lisainfo: IM 34204
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- Stabiliser Bar Diameter [mm]: 21.7
- paired article number: VKDS 451003
- Name: SK VKDS451003
- Manufacturer: SKF
- Fitting Position: Rear Axle
- General Information: rubber bush
- Manufacturer: VIKA
-
for PR number: UA4,
1JP, UC1 - Block Separation:
- Construction Year from: 07.2009
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Stabiliser Bar Diameter [mm]: 20.7
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. A3/ GOLF5/ OCTA - Manufacturer: MEY
- Construction Year to: 06.2009
- for PR number: UC1
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Stabiliser Bar Diameter [mm]: 21.7
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. GOLF5/ PASSAT/ - Manufacturer: MEY
- Fitting Position: Rear Axle
- for PR number: 0BE
- Stabiliser Bar Diameter [mm]: 20.7
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 18.5
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Rear Axle,
inner, Lower - Stabiliser Bar Diameter [mm]: 21.7
- Inner Diameter 1 [mm]: 17
- Outer Diameter 1 [mm]: 48
- Thickness 1 [mm]: 40
- Manufacturer: DELPHI
- Model Year from: 2009
- Fitting Position: Front Axle
- Weight [kg]: 0.096
- Inner Diameter [mm]: 21
- Packaging length [cm]: 4.6
- Packaging width [cm]: 4.4
- Packaging height [cm]: 3
- Manufacturer: FEBEST
-
Fitting Position: Rear Axle,
inner - Required quantity: 2
- Stabiliser Bar Diameter [mm]: 19.6
-
Material: PU
(Polyurethane) - Manufacturer: TEDGUM_TD
- Construction Year to: 06.2009
- Fitting Position: Rear Axle both sides
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!
- Engine Code: CBAB
- Construction Year from: 06.2009
- Stabiliser Bar Diameter [mm]: 22
- for PR number: G0K
- Length [mm]: 40
- Width [mm]: 47
- Thickness [mm]: 43
- Inner Diameter [mm]: 19
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.516
-
Name: REMONDIKOMPLEKT,
STABILISAATORILAAGER - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CBAB
- Construction Year from: 06.2009
- Stabiliser Bar Diameter [mm]: 22
- for PR number: G0K
- Length [mm]: 40
- Width [mm]: 47
- Thickness [mm]: 43
- Inner Diameter [mm]: 19
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 20.7
- Inner Diameter [mm]: 21
- Fitting Position: Rear Axle
- Weight [kg]: 0.516
-
Supplementary Article/Info 2: with bolts/
screws - Supplementary Article/Supplementary Info: with holder
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Paigutus - Kndmik VW T. A3/LEON/OCTAVIA/GOLF V/VI !!!KPL GUMY㠑ऱRUBY!!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks