Lisainfo: Filter type: Filter Insert
Height [mm]: 101
Outer diameter 1 [mm]: 64
Inner diameter 1 [mm]: 26
Inner diameter 2 [mm]: 21

• Engine Code: BKP, BMP, CBAB
• Filter type: Filter Insert
• Height [mm]: 141
• Outer Diameter 1 [mm]: 71
• Outer Diameter 2 [mm]: 15
• Inner Diameter [mm]: 33
• Manufacturer: JP GROUP
• Lisainfo: Oil filter
• Additional information: Oil filter

• Engine Code: CFFB
• Filter type: Filter Insert
• Height [mm]: 101
• Outer Diameter [mm]: 65
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 22
• Manufacturer: JP GROUP
• Lisainfo: Oil Filter
• Additional information: Oil Filter

• Filter type: Filter Insert
• Outer Diameter [mm]: 71
• Inner Diameter [mm]: 28
• Height [mm]: 142

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
TRANSPORTER V PLATFO
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
TRANSPORTER V PLATFO
(kvaliteediklass: PJ)"

• Filter type: Filter Insert
• Height [mm]: 101
• Outer Diameter [mm]: 64
• Manufacturer: KAMOKA FILTRY

• Filter type: Filter Insert
• Height [mm]: 141
• Outer Diameter [mm]: 71
• Seal Diameter [mm]: 29
• Manufacturer: KAMOKA FILTRY

• Engine Code: CBAB
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 141
• Inner Diameter [mm]: 33
• Outer Diameter [mm]: 71
• Outer Diameter 1 [mm]: 15
• Name: OLIFILTER
• Manufacturer: MAX

• Filter type: Filter Insert
• Length [mm]: 141
• Outer Diameter [mm]: 71.4
• Inner Diameter [mm]: 29.4
• Inner Diameter 1 [mm]: 23
• Fitted Diameter [mm]: 53
• Manufacturer: ASHIKA
• Lisainfo: 10-ECO023
• Additional information: 10-ECO023

• Filter type: Filter Insert
• Length [mm]: 141
• Outer Diameter [mm]: 71.4
• Inner Diameter [mm]: 29.4
• Inner Diameter 1 [mm]: 23
• Fitted Diameter [mm]: 53
• Manufacturer: JAPKO

• Height [mm]: 101
• Diameter 1 [mm]: 26
• Diameter 2 [mm]: 21
• Outer Diameter [mm]: 64
• Filter type: Filter Insert
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Length [mm]: 141
• Outer Diameter [mm]: 71.4
• Inner Diameter [mm]: 29.4
• Inner Diameter 1 [mm]: 23
• Fitted Diameter [mm]: 53
• Name: OLIFILTER
• Manufacturer: JPA

• Engine Code: CFFB
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 100
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 63
• Inner Diameter 1 [mm]: 28
• Name: OLIFILTER
• Manufacturer: MAX

• Outer Diameter 1 [mm]: 71
• Inner Diameter 1 [mm]: 33
• Inner Diameter 2 [mm]: 15
• Height [mm]: 141
• Filter type: Filter Insert
• Manufacturer: DENCKERMANN FILTRY

• Engine Code: CFFB
• Height [mm]: 101
• Outer Diameter 1 [mm]: 64
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 21
• Filter type: Filter Insert
• Name: CFD DFO0200
• Manufacturer: DACO

• Engine Code: CBAB
• Filter type: Filter Insert
• Height [mm]: 141
• Inner Diameter [mm]: 28.5
• Outer Diameter [mm]: 71
• Seal Diameter [mm]: 74
• Weight [kg]: 0.072
• Supplementary Article/Info 2: with seal ring
• Name: OLIFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CBAB
• Height [mm]: 141
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 71
• Inner Diameter 1 [mm]: 29
• Filter type: Filter Insert
• Name: CFD DFO0203
• Manufacturer: DACO

• Engine Code: CFFB
• Filter type: Filter Insert
• Height [mm]: 101
• Inner Diameter [mm]: 22
• Inner Diameter 1 [mm]: 22
• Outer Diameter [mm]: 65
• Manufacturer: DELLO AUTOMEGA

• Engine Code: CBAB
• Filter type: Filter Insert
• Height [mm]: 141
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 71
• Seal Diameter [mm]: 74
• Weight [kg]: 0.072
• Supplementary Article/Info 2: with seal ring
• Name: OLIFILTER
• Manufacturer: BLP
• Additional information: ADA102101
• Lisainfo: ADA102101

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CBAB
• Parameter: DP1110.11.0063
• Height [mm]: 143
• Diameter 2 [mm]: 16
• Diameter 3 [mm]: 29
• Outer Diameter [mm]: 71
• Filter type: Filter Insert
• Manufacturer: DRIVE

• Engine Code: CFFB
• Filter type: Filter Insert
• Height [mm]: 101
• Outer Diameter [mm]: 64.5
• Inner Diameter [mm]: 28
• Name: OLIFILTER
• Manufacturer: ALC

• Engine Code: CBAB
• Filter type: Filter Insert
• Height [mm]: 142
• Outer Diameter [mm]: 71.5
• Inner Diameter [mm]: 29.3
• Name: OLIFILTER
• Manufacturer: ALC

• Construction Year to: 11.2010
• Engine Code: CBAB
• Filter type: Filter Insert
• Height [mm]: 141
• Outer Diameter [mm]: 71
• Inner Diameter [mm]: 16
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 48
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.09
• Manufacturer: VALEO
• Name: VA 586506

• Engine Code: CBAB
• Filter type: Filter Insert
• Height [mm]: 141
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 71
• Inner Diameter 1 [mm]: 29
• SVHC: No SVHC present!
• Manufacturer: FILTRON
• Lisainfo: OE 650/1 FIL
• Additional information: OE 650/1 FIL

• Engine Code: CBAB
• Height [mm]: 141
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 72
• Supplementary Article/Supplementary Info: with gaskets/seals
• Packing Type: Box
• Filter type: Filter Insert
• Packaging length [cm]: 8.7
• Packaging width [cm]: 8.7
• Packaging height [cm]: 15.5
• Sealing Ring Diameter from [mm]: 29.5
• Sealing Ring Diameter up to [mm]: 53
• Name: CH COF100525E
• Manufacturer: CHAMPION

• Filter type: Filter Insert
• Height [mm]: 101
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 65
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: OLIFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CBAB, CFFB
• Height [mm]: 101
• Filter type: Filter Insert
• Diameter 1 [mm]: 26
• Diameter 2 [mm]: 21
• Outer Diameter [mm]: 64
• Manufacturer: MAGNETI MARELLI
• Name: MM 71760502

• Filter type: Filter Insert
• Inner Diameter [mm]: 21
• Height [mm]: 101
• Outer Diameter [mm]: 65
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: OLIFILTER
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CFFB
• Height [mm]: 101
• Diameter 2 [mm]: 28.5
• Filter type: Filter Insert
• Outer Diameter [mm]: 65
• Weight [kg]: 0.16
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Diameter [mm]: 65
• Height [mm]: 101
• Diameter 1 [mm]: 25
• General Information: filter element with gasket
• Manufacturer: VIKA

• Engine Code: CBAB
• Construction Year to: 11.2010
• Height [mm]: 140.5
• Inner Diameter [mm]: 33.3
• Outer Diameter [mm]: 70.5
• Filter type: Filter Insert
• Inner Diameter 1 [mm]: 15.2
• Weight [kg]: 0.196
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CFFB
• Parameter: DP1110.11.0117
• Height [mm]: 101
• Outer Diameter [mm]: 65
• Filter type: Filter Insert
• Inner Diameter 1 [mm]: 28
• Inner Diameter 2 [mm]: 28
• Manufacturer: DRIVE

• Engine Code: CFFB
• Filter type: Filter Insert
• Height [mm]: 101
• Outer Diameter 1 [mm]: 65
• Inner Diameter 1 [mm]: 28
• Inner Diameter 2 [mm]: 21
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Construction Year from: 11.2010
• Engine Code: CFFB
• Filter type: Filter Insert
• Height [mm]: 101
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 28
• Inner Diameter 1 [mm]: 28
• Weight [kg]: 0.094
• Manufacturer: VALEO
• Name: VA 586590

• Engine Code: CBAB
• Outer Diameter [mm]: 71
• Supplementary Article/Supplementary Info: with seal
• Filter type: Filter Insert
• Height [mm]: 141
• Inner Diameter [mm]: 29
• Name: OLIFILTER
• Manufacturer: MEY

• Engine Code: CFFB
• Filter type: Filter Insert
• Outer Diameter 1 [mm]: 65
• Inner Diameter 1 [mm]: 65
• Height [mm]: 102
• Manufacturer: KOLBENSCHMIDT

• for OE number: 03L 115 562
• Filter type: Filter Insert
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Engine Code: CFFB
• Outer Diameter [mm]: 65
• Supplementary Article/Supplementary Info: with seal
• Filter type: Filter Insert
• Height [mm]: 101
• Inner Diameter [mm]: 29
• Name: OLIFILTER
• Manufacturer: MEY
• Lisainfo: 1003220011
• Additional information: 1003220011

• Engine Code: CBAB
• Construction Year to: 11.2010
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 141
• Height 1 [mm]: 95
• Outer Diameter [mm]: 71
• Outer Diameter 2 [mm]: 15
• Name: OLIFILTER
• Manufacturer: BOS

• Engine Code: CBAB
• Filter type: Filter Insert
• Outer Diameter [mm]: 72
• Inner Diameter 1 [mm]: 35
• Inner Diameter 2 [mm]: 35
• Height [mm]: 141
• Manufacturer: HENGST FILTER
• Lisainfo: E19H D83
• Additional information: E19H D83

• Filter type: Filter Insert
• Diameter [mm]: 71
• Height [mm]: 141
• Height 1 [mm]: 95
• Diameter 2 [mm]: 15
• General Information: filter element with gasket; waved paper filter
• Manufacturer: VIKA

• for OE number: 070 115 562
• Filter type: Filter Insert
• Manufacturer: TRUCKTEC

• Engine Code: CBAB
• Height [mm]: 110
• Inner Diameter [mm]: 24
• Outer Diameter [mm]: 83
• Supplementary Article/Supplementary Info: with seal
• Inner Diameter 1 [mm]: 39
• Weight [kg]: 0.098
• Filter type: Filter Insert
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CBAB
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 141
• Inner Diameter [mm]: 33
• Outer Diameter [mm]: 71
• Outer Diameter 1 [mm]: 15.2
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• Engine Code: CBAB
• Filter type: Filter Insert
• Diameter [mm]: 71.5
• Height [mm]: 140.7
• Inner Diameter 2 [mm]: 29
• Inner Diameter 3 [mm]: 16
• Supplementary Article/Supplementary Info: with seal
• Packaging height [cm]: 14.5
• Packaging length [cm]: 7.5
• Packaging width [cm]: 7.5
• Net Weight [g]: 79
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN OX188D

• Filter type: Filter Insert
• Diameter [mm]: 71
• Height [mm]: 141
• Height 1 [mm]: 95
• Diameter 2 [mm]: 15
• General Information: filter element with gasket
• Manufacturer: VIKA

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gaskets/seals
• Outer Diameter [mm]: 63
• Height [mm]: 101
• Observe the vehicle manufacturer specifications:
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CFFB
• Construction Year from: 11.2010
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gaskets/seals
• Height [mm]: 103
• Outer Diameter [mm]: 65
• Inner Diameter 1 [mm]: 28
• Inner Diameter 2 [mm]: 21
• Name: OLIFILTER
• Manufacturer: BOS
• Lisainfo: F026407023 BOSCH
• Additional information: F026407023 BOSCH

• Engine Code: CFFB
• Filter type: Filter Insert
• Diameter [mm]: 65
• Height [mm]: 101
• Inner Diameter 2 [mm]: 22
• Inner Diameter 3 [mm]: 22
• Packaging height [cm]: 10.5
• Net Weight [g]: 61
• Packaging length [cm]: 7
• Packaging width [cm]: 7
• Name: KN OX388D
• Manufacturer: KNECHT

• Engine Code: CFFB
• Filter type: Filter Insert
• Outer Diameter [mm]: 65
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 24
• Height [mm]: 101
• Manufacturer: HENGST FILTER

• Engine Code: CFFB
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 100
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 63
• Inner Diameter 1 [mm]: 28
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Outer Diameter [mm]: 71
• Height [mm]: 142
• Observe the vehicle manufacturer specifications:
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Filter type: Filter Insert
• Length [mm]: 105.4
• Weight [kg]: 0.08
• Required quantity: 1
• Outer Diameter [mm]: 58, 55.5
• General Information: filter element with gasket
• Manufacturer: VIKA

• Engine Code: CFFB
• Supplementary Article/Supplementary Info: with seal, with oil filter housing
• Supplementary Article/Info 2: with filter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.