• Construction Year from: 08.1980
• Installatsiooni pool: ees vasakul
• Lukustusseadmed: koos sulgursilindriga, koos võtmega
• Värv: must
• valikuliselt:
• Manufacturer: JP GROUP
• Lisainfo: Door handle, front, outer, lockable, black, left
• Additional information: Door handle, front, outer, lockable, black, left

• Fitting Position: Right Front
• Lock System: without lock barrel
• Värv: must
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Right Rear
• Värv: must
• Manufacturer: DELLO AUTOMEGA

• Installatsiooni pool: taga vasakul, väljas
• soovitava lisavarustuse artiklinumber: 112 284
• paaris tootenumbrid: 102 990
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: taga paremal, väljas
• soovitava lisavarustuse artiklinumber: 112 284
• paaris tootenumbrid: 102 989
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: taga vasakul
• Värv: must
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 08.1980
• Installatsiooni pool: ees vasakul, väljas
• Lukustusseadmed: ilma sulgursilindrita, ilma võtmeta
• soovitava lisavarustuse artiklinumber: 112 284
• paaris tootenumbrid: 102 881
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 08.1980
• Installatsiooni pool: ees paremal, väljas
• Lukustusseadmed: ilma sulgursilindrita, ilma võtmeta
• soovitava lisavarustuse artiklinumber: 112 284
• paaris tootenumbrid: 102 880
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Left Rear
• Värv: must
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 1783150 257
• Installatsiooni pool: taga vasakul
• Värv: must
• Manufacturer: JP GROUP
• Lisainfo: Door handle, rear, left, black
• Additional information: Door handle, rear, left, black

• Vehicle Identification Number (VIN) from: 1783150 257
• Installatsiooni pool: taga paremal
• Värv: must
• Lisainfo: Door handle, rear, right, black
• Additional information: Door handle, rear, right, black

• Installatsiooni pool: taga paremal
• Värv: must
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: taga vasakul
• Seerianumber: EZC-VW-393
• Manufacturer: NTY

• Installatsiooni pool: ees vasakul
• Lukustusseadmed: ilma sulgursilindrita
• Värv: must

Lisainfo: Door handle, front, without cylinder. Nylon version without key and locking mechanism. Supplied with both strips in black and chrome, left Additional information: Door handle, front, without cylinder. Nylon version without key and locking mechanism. Supplied with both strips in black and chrome, left

• Installatsiooni pool: ees paremal
• Lukustusseadmed: ilma sulgursilindrita
• Värv: must
• Manufacturer: JP GROUP

Lisainfo: Door handle, front, without cylinder, Nylon version without key and locking mechanism. Supplied with both strips in black and chrome, right Additional information: Door handle, front, without cylinder, Nylon version without key and locking mechanism. Supplied with both strips in black and chrome, right

• Lock System: with key, with lock barrel
• Fitting Position: Left Front
• Värv: must
• Manufacturer: DELLO AUTOMEGA

• Installatsiooni pool: taga vasakul, väljas
• paaris tootenumbrid: 28-0077
• Name: UKSEKŽEPIDE
• Manufacturer: MAX

• Installatsiooni pool: taga paremal, väljas
• paaris tootenumbrid: 28-0075
• Name: UKSEKŽEPIDE
• Manufacturer: MAX

• Construction Year from: 08.1980
• Installatsiooni pool: ees vasakul, väljas
• Lukustusseadmed: koos sulgursilindriga
• soovitava lisavarustuse artiklinumber: 112 284
• paaris tootenumbrid: 102 879
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 08.1980
• Installatsiooni pool: ees vasakul, väljas
• Lukustusseadmed: koos sulgursilindriga
• paaris tootenumbrid: 28-0045
• Name: UKSEKŽEPIDE
• Manufacturer: MAX

• Construction Year from: 08.1980
• Installatsiooni pool: ees paremal, väljas
• Lukustusseadmed: koos sulgursilindriga
• soovitava lisavarustuse artiklinumber: 112 284
• paaris tootenumbrid: 102 878
• Manufacturer: HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 08.1980
• Installatsiooni pool: ees vasakul
• Lukustusseadmed: koos sulgursilindriga, koos võtmega
• Värv: must
• Manufacturer: JP GROUP
• Lisainfo: Door handle, front, outer, lockable, black, left
• Additional information: Door handle, front, outer, lockable, black, left

• Construction Year from: 08.1980
• Installatsiooni pool: ees paremal
• Lukustusseadmed: koos sulgursilindriga
• kohandatav: mitte reguleeritav
• Värv: must
• Lisainfo: Door handle, front, outer, lockable, right
• Additional information: Door handle, front, outer, lockable, right

• Construction Year from: 08.1980
• Installatsiooni pool: ees vasakul, väljas
• Lukustusseadmed: ilma sulgursilindrita, ilma võtmeta
• paaris tootenumbrid: 28-0050
• Name: UKSEKŽEPIDE
• Manufacturer: MAX

• Construction Year from: 08.1980
• Installatsiooni pool: ees paremal, väljas
• Lukustusseadmed: koos sulgursilindriga
• paaris tootenumbrid: 28-0047
• Name: UKSEKŽEPIDE
• Manufacturer: MAX

• Construction Year from: 08.1980
• Installatsiooni pool: ees paremal, väljas
• Lukustusseadmed: ilma võtmeta, ilma sulgursilindrita
• paaris tootenumbrid: 28-0047
• Name: UKSEKŽEPIDE
• Manufacturer: MAX

• Construction Year from: 08.1980
• Installatsiooni pool: ees paremal
• Lukustusseadmed: koos sulgursilindriga, koos võtmega
• kohandatav: kohandatav
• Värv: must
• valikuliselt:
• Manufacturer: JP GROUP

Lisainfo: Door handle, front, outer, lockable, black, right, adjustable Additional information: Door handle, front, outer, lockable, black, right, adjustable

• Installatsiooni pool: väljas, ees vasakul
• Lukustusseadmed: ilma sulgursilindrita
• paaris tootenumbrid: 50544
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: ees vasakul
• Lukustusseadmed: ilma võtmeta, ilma sulgursilindrita
• Värv: must
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: ees paremal
• Värv: must
• Lukustusseadmed: koos võtmega, koos sulgursilindriga
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: ees vasakul
• Värv: must
• Lukustusseadmed: koos võtmega, koos sulgursilindriga
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Identification Number (VIN) from: 1783150 257
• paaris tootenumbrid: 15442
• Värv: must
• Materjal: Plastik
• Installatsiooni pool: taga, vasakul
• Kaal (kg): 0,147
• Name: UKSEKŽEPIDE
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1783150 257
• paaris tootenumbrid: 15440
• Värv: must
• Materjal: Plastik
• Installatsiooni pool: taga, paremal
• Kaal (kg): 0,147
• Name: UKSEKŽEPIDE
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.1981
• paaris tootenumbrid: 15434
• Värv: must
• Materjal: Plastik
• Installatsiooni pool: vasakul
• Kaal (kg): 0,232
• Lukustusseadmed: koos sulgursilindriga, kahe võtmega
• Name: UKSEKŽEPIDE
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.1981
• paaris tootenumbrid: 15432
• Värv: must
• Materjal: Plastik
• Installatsiooni pool: paremal
• Kaal (kg): 0,232
• Lukustusseadmed: koos sulgursilindriga, kahe võtmega
• Name: UKSEKŽEPIDE
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1783150 257
• Värv: must
• Lukustusseadmed: ilma võtmeta, ilma sulgursilindrita
• Installatsiooni pool: taga vasakul
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lukustusseadmed: ilma võtmeta, ilma sulgursilindrita
• Installatsiooni pool: ees paremal
• Värv: must
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.1981
• Installatsiooni pool: ees vasakul
• Lukustusseadmed: koos võtmega, koos sulgursilindriga
• Värv: must
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.1981
• Lukustusseadmed: koos sulgursilindriga, koos võtmega
• Installatsiooni pool: ees paremal
• Värv: must
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.