• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17.5
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Height 1 [mm]: 15
• Height 2 [mm]: 14.75
• Lisainfo: Wheel bearing kit, rear, for one wheel
• Additional information: Wheel bearing kit, rear, for one wheel

• Inner Diameter [mm]: 40
• Outer Diameter 1 [mm]: 52
• Outer Diameter 2 [mm]: 58
• Height [mm]: 7.5
• Material: NBR (nitrile butadiene rubber)
• Dust Cover: with dust lip
• Fitting Position: Rear Axle both sides
• Manufacturer: TOPRAN
• Lisainfo: 103 514 HP
• Additional information: 103 514 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: outer, Rear Axle both sides
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 17.5
• Width [mm]: 15
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, outer
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing, front, outer
• Additional information: Wheel bearing, front, outer

• Fitting Position: Front Axle both sides, inner
• Lisainfo: Wheel bearing, front, inner
• Additional information: Wheel bearing, front, inner

• Height [mm]: 14.7
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50.3
• Fitting Position: Front Axle
• Weight [kg]: 0.11
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: with wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-VW-000
• Manufacturer: NTY
• Name: NTY KLT-VW-000

• Fitting Position: Rear Axle
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Name: Wheel bearing kit
• Quality class: PJ

Lisainfo: "Tootja: CX
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 29
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle
• Required quantity: 2
• Parameter: DP2010.10.0085
• Manufacturer: DRIVE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17.5
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 15
• Width 2 [mm]: 15
• Outer Diameter 2 [mm]: 40
• Weight [kg]: 0.3
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• for OE number: 191 598 625
• Inner Diameter [mm]: 17.5
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Fitting Position: Rear Axle
• Width [mm]: 15
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 50
• Bearing Type: Roller Bearing
• Supplementary Article/Info 2: with seal ring
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Width [mm]: 14.7
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 39.9
• Width 1 [mm]: 13.8
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with grease cap, with crown nut, with shaft seal
• Full Set:
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Width [mm]: 14.6
• Inner Diameter [mm]: 17.46
• Outer Diameter [mm]: 39.88
• Width 2 [mm]: 14.73
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.29
• Net weight [kg]: 0.31
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.234
• Supplementary Article/Info 2: with shaft seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.254
• Supplementary Article/Supplementary Info: with attachment material
• Name: SW 99 90 3674
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Alternative Repair Kit: 100 598 0101, 100 598 0101/SK
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 40
• Height [mm]: 15
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.254
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with attachment material
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.234
• Supplementary Article/Info 2: with shaft seal
• Name: SW 30 85 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 13.8
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 39.9
• Width 1 [mm]: 14.2
• Supplementary Article/Info 2: with fastening material
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with attachment material
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17.5
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Height 1 [mm]: 15
• Height 2 [mm]: 14.73
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Alternative Repair Kit: 100 598 0101, 100 598 0101/SK
• Fitting Position: Rear Axle, inner
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50
• Height [mm]: 14.73
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: FRRE LR+RE
• Inner Diameter [mm]: 13
• Number of bores: 29
• Number of mounting bores: 17
• Width [mm]: 14
• Width 2 [mm]: 39
• Diameter 2 [mm]: 1
• Name: DA KWD1019
• Manufacturer: DAYCO

• Supplementary Article/Info 2: with grease cap, with seal ring
• Outer Diameter 1 [mm]: 50
• Inner Diameter 1 [mm]: 29
• Outer Diameter 2 [mm]: 40
• Inner Diameter 2 [mm]: 19
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Right, Rear Axle
• Inner Diameter 1 [mm]: 17
• Outer Diameter 2 [mm]: 50
• Outer Diameter 1 [mm]: 39
• Width 1 [mm]: 13
• Width 2 [mm]: 14
• Manufacturer: SNR

• Fitting Position: Front Axle both sides
• Lisainfo: Wheel bearing front, left/right
• Additional information: Wheel bearing front, left/right

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 14.605
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 39.878
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 17.462
• Inner Diameter 2 [mm]: 29
• Manufacturer: GSP

• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.465
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle
• Required quantity: 2
• Parameter: DP2010.10.0239
• Manufacturer: DRIVE

• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 64
• Inner Diameter [mm]: 34
• Height [mm]: 37
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Alternative Repair Kit: 614 160 0007, 100 498 0031
• Fitting Position: Front Axle
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.6
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Supplementary Article/Info 2: with fastening material
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 34
• Outer Diameter 1 [mm]: 64
• Weight [kg]: 0.64
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Fitting Position: Front Axle, Left, Right
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Manufacturer: IJS GROUP

• Fitting Position: Rear Axle
• Required quantity: 2
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: REAR LR+FR
• Inner Diameter [mm]: 55
• Number of bores: 19
• Number of mounting bores: 17
• Width [mm]: 19
• Width 2 [mm]: 17
• Diameter 2 [mm]: 1
• Name: DA KWD1486
• Manufacturer: DAYCO

• Fitting Position: Right, Front Axle
• Width 1 [mm]: 37
• Inner Diameter 1 [mm]: 34
• Outer Diameter 1 [mm]: 64
• Manufacturer: SNR /NTN-SNR/
• Name: SN R154.14

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with attachment material
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 34
• Inner Diameter 2 [mm]: 34
• Outer Diameter [mm]: 64
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Rim Hole Number: 4
• Fitting Position: Rear Axle
• Required quantity: 2
• Brake Type: Disc Brake
• Height [mm]: 71.3
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 226
• Supplementary Article/Info 2: with integrated wheel bearing
• Manufacturer: SKF