• Supplementary Article/Info 2: with wheel hub, with integrated ABS sensor
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-018
• Manufacturer: NTY
• Name: NTY KLP-VW-018

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

• Supplementary Article/Info 2: with wheel hub
• Fabrication Number: KLP-VW-022
• Article number of recommended accessories: KLP-VW-022-Z
• Manufacturer: NTY
• Name: NTY KLP-VW-022

Fitting Position: Front Axle, Front Axle Left, Front Axle Right, Rear Axle

• for PR number: 1ZC, 1ZF
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Manufacturer: JP GROUP
• Lisainfo: Wheel hub for disc brake, front, 85 mm
• Additional information: Wheel hub for disc brake, front, 85 mm

• Material: Metal
• Surface: Zinc-coated
• Manufacturer: AUTO-GH
• Name: GH 399961

Fitting Position: Front Axle, Front Axle Right, Front Axle Left, Lower Front Axle

• Length [mm]: 70
• External Thread [mm]: M16 x 1,5
• Bolt Head-/Nut Design: Female Star
• Quality/ Grade: 10.9
• Fitting Position: Rear Axle both sides
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Inner Diameter [mm]: 30
• Supplementary Article/Info 2: with wheel hub
• Fabrication Number: KLT-VW-013
• Manufacturer: NTY
• Name: NTY KLT-VW-013

Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right, Front Axle

• Fitting Position: Rear
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Weight [kg]: 2.23
• Number of Holes: 5
• Warranty: 4 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV011
• Manufacturer: ESEN SKV

• Fitting Position: Rear
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Weight [kg]: 2.53
• Number of Holes: 5
• Warranty: 4 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV006
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Width [mm]: 69
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288
• Width [mm]: 83
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 136.5
• Width 2 [mm]: 48
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Outer Diameter 2 [mm]: 81
• Inner Diameter 2 [mm]: 51
• Number of mounting bores: 4
• Manufacturer: OPTIMAL
• Additional information: 101017
• Lisainfo: 101017

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Inner Diameter [mm]: 30
• Flange Ø [mm]: 136.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Inner Diameter 1 [mm]: 32
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• for PR number: 1LJ, 1ZA, 1ZD, 1ZE, 1ZM, 1ZP
• Rim Hole Number: 5
• Flange Ø [mm]: 137
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Rear Axle
• Width [mm]: 69
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 137
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Manufacturer: OPTIMAL
• Additional information: 102019A
• Lisainfo: 102019A

• Quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Bearing Type: Angular Ball Bearing
• Width [mm]: 68.5
• Weight [kg]: 2.2
• Required quantity: 2
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 112
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• for OE number: 1T0498621
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Weight [kg]: 3.72
• Number of Holes: 5
• Warranty: 4 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV010

• Fitting Position: Front Axle
• Outer Diameter [mm]: 136
• for OE number: 1T0 498 621 SK
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Weight [kg]: 3.39
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 112
• Warranty: 4 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV040

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Outer Diameter [mm]: 136
• Quantity per axle: 2
• Centering Diameter [mm]: 30
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with grease cap, with screw General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Outer Diameter [mm]: 136
• for OE number: 1K0498621
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• for OE number: 1K0498621
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• for PR number: 1LJ, 1ZA, 1ZD, 1ZE, 1ZM, 1ZP
• Rim Hole Number: 5
• Flange Ø [mm]: 137
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle
• Width [mm]: 68.2
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Tightening Torque [Nm]: 180
• Rotation angle [°]: 180
• Manufacturer: OPTIMAL

• Supplementary Article/Info 2: with wheel bearing
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: JP GROUP
• Lisainfo: Wheel Hub
• Additional information: Wheel Hub

• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Vehicle Identification Number (VIN) to: 1K-9-899 999
• Vehicle Identification Number (VIN) from: 1K-9-900 001
• Rim Hole Number: 5
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 30
• Manufacturer: GSP

• Fitting Position: Rear
• General Information: wheelhub with bearing; rear
• Manufacturer: BORSEHUNG

• Number of Holes: 5
• Outer Diameter [mm]: 137
• Braking/Drive Dynamics: for vehicles with ABS
• Width [mm]: 69, 70
• Inner Diameter [mm]: 32
• Supplementary Article/Supplementary Info: with attachment material
• Fitting Position: Rear Axle
• Weight [kg]: 2.549
• Manufacturer: VAICO

Supplementary Article/Info 2: with integrated magnetic sensor ring, with wheel bearing General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear
• Supplementary Article/Info 2: with bolts
• General Information: wheelhub with bearing; rear; with screws
• Manufacturer: BORSEHUNG

• Outer Diameter [mm]: 136
• Inner Diameter [mm]: 32
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

Supplementary Article/Info 2: with integrated magnetic sensor ring, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN): [8P-4-162 001;]
• Fitting Position: Right, Left, Rear Axle
• Inner Diameter 1 [mm]: 30
• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Number of pins: 43
• Rotation angle [°]: 180
• Tightening Torque [Nm]: 180
• Name: SN R154.55
• Manufacturer: NTN-SNR

• Fitting Position: Front Axle Left, Front Axle Right
• Width [mm]: 55
• Manufacturer: FAST

• Fitting Position: Rear Axle
• for PR number: 3M0
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 30
• Width [mm]: 67.8
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610960

• Width [mm]: 68
• Rim Hole Number: 5
• Quantity per axle: 2
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Inner Diameter [mm]: 30
• Diameter [mm]: 136.5
• Height [mm]: 68
• Weight [kg]: 2.262
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for PR number: 1ZC, 1ZF
• Block Separation:
• Number of mounting bores: 3
• Width [mm]: 85
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.765
• for OE number: 5K0 498 621 A
• Manufacturer: FEBI

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1ZC, 1ZF
• Block Separation:
• Number of mounting bores: 3
• Width [mm]: 85
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.365
• for OE number: 5K0 498 621 A SK
• Manufacturer: FEBI

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• Width [mm]: 68
• Inner Diameter [mm]: 30
• Flange Ø [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: SKF
• Lisainfo: VKBA 3656 SKF
• Additional information: VKBA 3656 SKF

• for PR number: 1ZA, 1ZD, 1ZE, 1ZM, 1ZP
• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1K0407621C
• Rim Hole Number: 5
• Number of Teeth: 36
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Version: One
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Width [mm]: 80
• Manufacturer: FAST

• Fitting Position: Front Axle
• Required quantity: 2
• for PR number: 1LJ, 1ZA, 1ZM, 1ZE, 1ZD, 1ZP
• Technical Information: Knuckle, number of holes 4
• Flange Ø [mm]: 137
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: SKF
• Name: SK VKBA3643
• Lisainfo: VKBA 3643 SKF
• Additional information: VKBA 3643 SKF

• Fitting Position: Front Axle
• not for PR number: 1ZF
• Number of mounting bores: 4
• Width [mm]: 48
• Inner Diameter [mm]: 27.5
• Outer Diameter [mm]: 82.5
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Rolling Bearing
• Outer Diameter 1 [mm]: 65
• Outer Diameter 2 [mm]: 136
• Weight [kg]: 3.12
• Name: SW 32 92 6377
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 32
• Always compare old and new part (in particular OE No.):
• Manufacturer Restriction: Durchmesser beachten
• Outer Diameter [mm]: 137
• Width [mm]: 69.5
• Manufacturer: METZGER

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring

• Fitting Position: Right, Left, Rear Axle, Front Axle
• No. of holes 2: 4
• No. of holes 1: 5
• Supplementary Article/Info 2: with rubber mount
• Width 1 [mm]: 84
• Outer Diameter 1 [mm]: 136
• Number of pins: 43
• Rotation angle [°]: 180
• Tightening Torque [Nm]: 200
• Manufacturer: SNR /NTN-SNR/
• Name: SN R154.56

Vehicle Identification Number (VIN): [;1K-5-600000], [;1K-7W082500], [;5P-5-165000], [;8P-5A200 000], [;8P-5B050 000]

• for PR number: 1ZC, 1ZF
• Block Separation:
• Number of mounting bores: 3
• Width [mm]: 85
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.765
• for OE number: 5K0 498 621 A
• Name: SW 30 92 7342
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 1K-5-600000
• Block Separation:
• not for PR number: 1ZC, 1ZF
• Vehicle Identification Number (VIN) from: 1K-6-500001
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Outer Diameter 2 [mm]: 65
• Outer Diameter 1 [mm]: 85
• Width 2 [mm]: 48
• Number of mounting bores: 4
• SVHC: No SVHC present!
• Manufacturer: FAG
• Lisainfo: 713 6106 10 FAG
• Additional information: 713 6106 10 FAG

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 280
• Width [mm]: 83
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 136.5, 80
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of mounting bores: 3
• Number of Teeth on input shaft: 36
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• for PR number: 1ZC, 1ZF
• Rim Hole Number: 5
• Flange Ø [mm]: 136
• Outer Diameter 1 [mm]: 80
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Vehicle Identification Number (VIN) from: 1K-6-500 001
• Quantity: 2
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Fitting Position: Front Axle
• Bearing Type: Angular Ball Bearing
• Width [mm]: 85
• Weight [kg]: 0.765
• Required quantity: 2
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Number of Holes: 3
• Bolt Hole Circle Ø [mm]: 112
• General Information: wheel hub with bearing; front; 3holes
• Manufacturer: VIKA

• Fitting Position: Right, Left, Front Axle
• Supplementary Article/Info 2: with rubber mount
• Rim Hole Number: 5
• Mounting Type: Clamped
• Tightening Torque [Nm]: 200
• Rotation angle [°]: 180
• Manufacturer: SNR /NTN-SNR/
• Name: SN R154.61

• Vehicle Identification Number (VIN) to: 1K-5-600 000
• Vehicle Identification Number (VIN) from: 1K-6-500 001
• Quantity: 2
• Fitting Position: Front Axle
• Number of Holes: 4
• General Information: wheel hub with bearing; 4holes
• Manufacturer: VIKA

• Fitting Position: Front Axle, Front
• Quantity: 2
• Number of bores: 3
• Number of Holes: 3
• General Information: wheel hub with bearing; front; 3 holes
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 27.5
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 84.5
• Weight [kg]: 3.12
• Bearing Type: Rolling Bearing
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Number of Holes: 4
• General Information: wheel hub with bearing; front; 4 holes
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Required quantity: 2
• for PR number: 1ZC, 1ZF
• Technical Information: Knuckle, number of holes 3
• Flange Ø [mm]: 136
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Manufacturer: SKF
• Name: SK VKBA6556
• Lisainfo: VKBA 6556 SKF
• Additional information: VKBA 6556 SKF

• Vehicle Identification Number (VIN) from: 1K-6-500 001
• Quantity: 2
• Supplementary Article/Info 2: without bolts
• Fitting Position: Front Axle
• Bearing Type: Angular Ball Bearing
• Width [mm]: 80
• Weight [kg]: 0.765
• Required quantity: 2
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Number of Holes: 3
• Bolt Hole Circle Ø [mm]: 112
• General Information: wheel hub with bearing; front; without bolts
• Manufacturer: VIKA

• Number of bores: 4
• Supplementary Article/Info 2: with bolts
• Fitting Position: Rear Axle
• General Information: wheel hub with bearing; rear; 4 holes; with screws
• Manufacturer: BORSEHUNG

• Fitting Position: Front
• Number of bores: 3
• Supplementary Article/Info 2: with bolts
• Manufacturer: BORSEHUNG

General Information: wheel hub with bearing; front; 3 holes; with screws

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 1K-6-500001
• for PR number: 1ZC, 1ZF
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.4
• Outer Diameter 2 [mm]: 65
• Outer Diameter 1 [mm]: 80
• Width 2 [mm]: 48.1
• Number of mounting bores: 3
• SVHC: No SVHC present!
• Manufacturer: FAG