Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Voltage [V]: 12
- Fitting Position: Front
- Length [mm]: 35.4
- Width [mm]: 47
- Height [mm]: 113.7
- Weight [kg]: 0.088
- Operating Mode: Electric
- Vehicle Equipment: for vehicles without check control system
- Pump Type: Diaphragm Pump
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Equipment: for vehicles with headlamp cleaning system
-
Fabrication Number: EDS-
VW- 004 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Manufacturer: DELLO AUTOMEGA
Vehicle Identification Number (VIN) from: 7J-6-000 001, 7J-8-000 001, 7J-3-000 001, 7J-4-000 001, 7J-7-000 001, 7J-5-000 001, 7J-9-000 001 Vehicle Identification Number (VIN) to: 7J-8-030 000, 7J-4-050 000, 7J-6-050 000, 7J-7-040 000, 7J-3-001 000, 7J-5-040 000
- Fitting Position: both sides
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Operating Mode: Electric
- Pump Type: Mono Pump
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Washer pump,
headlight cleaning -
Additional information: Washer pump,
headlight cleaning
- Pump Type: Mono Pump
- Voltage [V]: 12
- Material: Plastic
- Number of pins: 2
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: MAX
- Voltage [V]: 12
- Operating Mode: Electric
- Number of pins: 2
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Left Front,
Right Front - Vehicle Equipment: for vehicles with headlamp cleaning system
- Colour: black
- Warranty: 3 years warranty
- Name: CE 15SKV508
- Manufacturer: ESEN SKV
- Connector Shape: oval
- Pump Type: Mono Pump
- Operating Mode: Electric
- Number of pins: 2
- Rated Voltage [V]: 12
-
for OE number: 3B7 955 681,
1 209 387, 955 624 502 00 -
Name: KLAASIPESUVEE PUMP,
TULEPESUR - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of connectors: 2
- Material: Plastic
- Weight [kg]: 0.175
- Vehicle Equipment: for vehicles with headlamp cleaning system
-
Name: KLAASIPESUVEE PUMP,
TULEPESUR - Manufacturer: FEB
- Additional information: F26274
- Lisainfo: F26274
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Left Front,
Right Front - Vehicle Equipment: for vehicles with headlamp cleaning system
- Colour: black
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Pump Type: Mono Pump
- Pressure [bar]: 2.5
- Flow rate [l/h]: 432
- Voltage [V]: 12
- Operating Mode: Electric
- Weight [kg]: 0.155
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Operating Mode: Electric
- Pump Type: Mono Pump
- Voltage [V]: 12
- Outlet Ø [mm]: 7
- Number of pins: 2
-
Name: KLAASIPESUVEE PUMP,
TULEPESUR - Manufacturer: MEY
- Lisainfo: 3130670001
- Additional information: 3130670001
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of connectors: 2
- Material: Plastic
- Weight [kg]: 0.175
- Vehicle Equipment: for vehicles with headlamp cleaning system
- Manufacturer: SWAG
- Name: SW 32 92 6274
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 7H-
3- 000 001, 7H- 6- 000 001 -
Vehicle Identification Number (VIN) to: 7H-
3- 001 000, 7H- 6- 200 000 - Block Separation:
- Construction Year from: 01.2006
- Operating Mode: Electric
- Pump Type: Mono Pump
- Plug Type: Blade Terminal
- Fitting Position: Front
- Article number of recommended accessories: 2324118
- Manufacturer: METZGER
- Voltage [V]: 12
- Operating Mode: Electric
- Pump Type: Mono Pump
- Plug Type: Blade Terminal
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 8TW006849031
- Fitting Position: both sides
-
Name: Pesuveeds,
Tulepesurid - Manufacturer: MD
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks