• for PR number: 1BH, 1BJ, 7X1, 7X9
• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 38
• Socket colour: grey

Lisainfo: ABS sensor, front, left

• Colour Coding: grey
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins
• Additional information: Sender for water temperature gauge, 2 pins

• Fitting Depth [mm]: 29
• Housing Colour: black
• Manufacturer: KAMOKA

• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Fabrication Number: ECT-VW-002
• Manufacturer: NTY
• Name: NTY ECT-VW-002

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 06A919501
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.01
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• paired article number: hca-vw-013
• Fabrication Number: HCA-VW-012
• Manufacturer: NTY
• Name: NTY HCA-VW-012

• Sensor Type: Active sensor
• Braking/Drive Dynamics: for vehicles without Adaptive Cruise Control
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-VW-034
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• paired article number: hca-vw-012
• Fabrication Number: HCA-VW-013
• Manufacturer: NTY
• Name: NTY HCA-VW-013

• Engine Code: DKRD
• Colour Coding: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: EP 1.830.278
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Surface: primed
• Sensor Type: Ultrasonic Sensor
• Fitting Position: both sides, Rear, inner, Front, outer, Centre
• Fabrication Number: EPDC-AU-016
• Manufacturer: NTY
• Name: NTY EPDC-AU-016

• Supplementary Article/Info 2: without cable
• Socket colour: black
• Fabrication Number: ESS-VW-000
• Manufacturer: NTY

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: black, grey
• Fitting Depth [mm]: 20
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PT009309331

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle
• Required quantity: 2
• for PR number: 1BA, 2MH, 2MK, 7X0, 7X1
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN FILTRY

• Length [mm]: 66
• Sensor Type: Active sensor
• paired article number: FT80422
• Fitting Position: Front Axle Left
• Manufacturer: FAST

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 75
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN FILTRY

Lisainfo: ABS sensor, front, right

• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN FILTRY

• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: BREMI

• Required quantity: 1
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: BREMI

• Sensor Type: Active sensor
• Braking/Drive Dynamics: for vehicles with Adaptive Cruise Control
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-VW-035
• Manufacturer: NTY

• Engine Code: DKRD
• Housing Colour: black
• Name: EP 1.830.355
• Manufacturer: EPS

• Suspension: for vehicles with heavy duty suspension
• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Hall Sensor
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• for PR number: 1BA, 1BH, 2MH, 2MK, 7X0, 7X1, 7X7, 7X9
• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: BREMI

• Construction Year from: 01.2019
• Diameter [mm]: 25
• Height [mm]: 52
• Weight [kg]: 0.08
• Number of connectors: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Screw Connection
• Connector Shape: D Shape
• Number of pins: 2
• Socket colour: black
• for OE number: 03F919501A
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Fitting Position: Front Axle Right
• Number of pins: 2
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 28
• for OE number: 7H0927804
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0002

• Length [mm]: 66
• Sensor Type: Active sensor
• paired article number: FT80421
• Fitting Position: Front Axle Right
• Manufacturer: FAST

• Version: 1
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• for PR number: 1BA, 2MH, 2MK, 7X0, 7X1
• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Fitting Depth [mm]: 37.8
• Number of connectors: 2
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• for PR number: 7X0, 7X1, 7X7, 7X9
• Overall Length [mm]: 75
• Length [mm]: 37
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 30257
• Weight [kg]: 0.09
• Manufacturer: A.B.S.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.011
• for OE number: 03F 919 501 B
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 75
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: FAST

• Construction Year from: 01.2019
• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Name: MM SDP107
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 01.2019
• Vehicle Equipment: for vehicles with rear view camera system
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Weight [kg]: 0.02
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV015

Fitting Position: Rear, Left, Longitudinal, Right, inner, outer, Front and Rear

• Fitting Position: Front, outer, Rear
• Block Separation:
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Chemical Properties: Paintable
• for OE number: 5Q0919275B
• Manufacturer: DELLO AUTOMEGA

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.011
• for OE number: 03F 919 501 B
• Manufacturer: SWAG
• Name: SW 30 10 6571

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECM-VW-006
• Manufacturer: NTY

• Fitting Position: Front Axle, Rear Axle, Left, Right
• Number of pins: 2
• Socket Width [mm]: 1.5
• Plug Type: Female
• Number of circuits: 2
• Material: CuSn (copper-tin)
• Cable Length [mm]: 500
• Cable cross-section from [mm²]: 0.75
• Cable cross-section to [mm²]: 0.75
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with shrink squeeze connector
• Manufacturer: METZGER

• Quantity: 1
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11473

• Engine Code: DKRD
• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• for PR number: 1BA, 1BH, 2MH, 2MK, 7X0, 7X1, 7X7, 7X9
• Sensor Length [mm]: 37.8
• Name: EP 1.960.017
• Manufacturer: EPS

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear
• Manufacturer: FAST

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 03F919501B, 04E919501C

• Length [mm]: 24
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fabrication Number: ECP-AU-029
• Manufacturer: NTY

• Engine Code: DKRD
• Fitting Position: Front Axle Right
• Required quantity: 1
• Sensor Length [mm]: 27.5
• Name: EP 1.960.006
• Manufacturer: EPS

• Required quantity: 1
• Manufacturer: BREMI

• Required quantity: 2
• for PR number: 1BA, 2MH, 2MK, 7X0, 7X1
• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Colour: black
• Sensor Type: Hall Sensor, Active sensor
• Number of pins: 2
• Number of connectors: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Measuring Range from [kPa]: 11
• Measuring Range to [kPa]: 307
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Manufacturer: CALORSTAT BY VERNET

• Fitting Position: Bumper
• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 28SKV096
• Manufacturer: ESEN SKV

• Number of pins: 3
• Name: DE SS11482
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left
• Quantity: 1
• Overall Length [mm]: 66
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 30018
• Weight [kg]: 0.1
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Quantity: 1
• Overall Length [mm]: 66
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 30017
• Weight [kg]: 0.1
• Manufacturer: A.B.S.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114301

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle, Right, Front Axle Right
• Quantity: 1
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Height [mm]: 27.5
• Colour: black
• Sensor Type: Hall Sensor, Active sensor
• Number of pins: 2
• Number of connectors: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Number of mounting bores: 1
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Quantity: 2
• for PR number: 7X0, 7X5, 7X6, 7X7, 7X1, 7X9, 1BH, 1BJ
• Alternatively:
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20599

• Fitting Position: Front Axle Left
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI
• Name: DE SS20035
• Quality class: PJ

• Fitting Position: Front Axle Right
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI
• Name: DE SS20036

• Length [mm]: 38
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: FAST

• Fitting Position: Front Axle Right
• paired article number: 23824
• Number of connectors: 2
• Weight [kg]: 0.12
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 4
• Fitting Position: inner, Front, Rear
• Number of pins: 3
• Colour: black

Manufacturer: BOSCH

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10169

• Number of circuits: 3
• Plug Type: Butt Joint
• Cable Length [mm]: 200
• Wire cross-section [mm²]: 0,5
• Manufacturer: METZGER

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Fitting Position: Front Axle Left
• paired article number: 32 92 3822
• Number of connectors: 2
• Weight [kg]: 0.12
• Manufacturer: SWAG
• Name: SW 32 92 3824

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• paired article number: 32 92 3824
• Number of connectors: 2
• Weight [kg]: 0.12
• Manufacturer: SWAG
• Name: SW 32 92 3822

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: BOSCH

• Required quantity: 1
• Number of mounting bores: 1
• Voltage [V]: 12
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fitting Position: Front Axle Left, Rear Axle Left
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012039011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Number of mounting bores: 1
• Voltage [V]: 12
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fitting Position: Front Axle Right, Rear Axle Right
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: DKRD
• Required quantity: 1
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.075
• Manufacturer: EPS

• Fitting Position: Rear Axle
• Quantity: 2
• for PR number: 1BA, 1BH, 2MH, 2MK, 7X0, 7X1, 7X7, 7X9
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI
• Name: DE SS20303
• Quality class: PJ

• Fitting Position: Right, Left, Rear Axle
• Manufacturer: SNR /NTN-SNR/
• Name: SN ASB154.30

• Fitting Position: Rear Axle
• for OE number: WHT 003 864 D
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 75
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Quantity: 1
• Number of pins: 4
• Name: DE PS20073-12B1
• Manufacturer: DELPHI

• Fitting Position: Front Axle Right
• Required quantity: 1
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• paired article number: 100 899 0041
• Manufacturer: MEYLE

• Lambda Sensor: Diagnostic Probe
• Cable Length [mm]: 970
• Exhaust System: after catalytic converter
• Conductor Number: 4
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV126

• Fitting Position: Rear Axle
• Required quantity: 2
• for PR number: 1BA, 2MH, 2MK, 7X0, 7X1
• Supplementary Article/Info 2: without cable
• MAPP code available:
• Manufacturer: ATE

Manufacturer: BOSCH

• Fitting Position: Rear Axle
• for PR number: 1BA, 1BH, 2MH, 7X1, 7X7, 7X9
• for combined PR number: 2MK+7X0
• Sensor Type: Active sensor
• Length [mm]: 75
• Supplementary Article/Info 2: without cable
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!