Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Protective Cap/
Bellow, shock absorber -
Additional information: Protective Cap/
Bellow, shock absorber
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Manufacturer: JP GROUP
- Lisainfo: Shock Absorber
- Additional information: Shock Absorber
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension
- Fitting Position: Front Axle both sides
- Length [mm]: 205
- Weight [kg]: 0.065
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Outer Diameter [mm]: 68,
80 - Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.07
-
Name: Kaitsemts/
kaitsekumm, amort - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Weight [kg]: 0.108
- Packaging length [cm]: 19
- Packaging width [cm]: 7.8
- Packaging height [cm]: 7.8
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Top eye,
Bottom eye -
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: MAX
-
Lisainfo: MGA-
5714 -
Additional information: MGA-
5714
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top eye,
Bottom eye -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: JAPKO
- Vehicle type: G02
-
for PR number: G07,
G08 - Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top eye -
Shock Absorber System: Twin-
Tube - Name: Gas shock absorber
- Quality class: PJ
Suspension: for vehicles with sports suspension, for vehicles with standard suspension
Lisainfo: "Tootja: SRL
VW CADDY III
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW CADDY III
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top eye,
Bottom eye -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: JPA
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top eye,
Bottom eye -
Manufacturer: AUTO-
GH
- Fitting Position: Rear Axle
- Length [mm]: 475
- Length 2 [mm]: 302
- Shock Absorber Design: Damper Module
-
Shock Absorber Mounting Type: Bottom eye,
Top eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Diameter 1 [mm]: 45
- Diameter 2 [mm]: 30
- Spring Type: for vehicles with coil spring suspension
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Diameter 1/ Diameter 2 [mm]: 25/
55 - Article number of recommended accessories: SMA0148
- Shock Absorber Mounting Type: Top pin
- Manufacturer: ASHIKA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Diameter 1/ Diameter 2 [mm]: 25/
55 - Article number of recommended accessories: SMJ0148
- Shock Absorber Mounting Type: Top pin
- Manufacturer: JAPKO
- Lisainfo: MJ00031 JAPKO
- Additional information: MJ00031 JAPKO
- Axle: Reinforced wheel suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
-
Diameter [mm]: 25,
54 - Manufacturer: KAVO
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top eye - replacement in pairs recommended:
- Name: AMORT
- Manufacturer: MEY
- Axle: Reinforced wheel suspension
- Payload: for increased payload
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top eye,
Bottom eye -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Diameter 1/ Diameter 2 [mm]: 25/
55 - Article number of recommended accessories: SM0148
- Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: JPA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 100 412 2039,
100 412 2039/ S, 100 640 0009 - replacement in pairs recommended:
- Name: Amort
- Manufacturer: MEY
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 100 412 2039/
S, 100 640 0007, 100 412 2039 - replacement in pairs recommended:
- Name: AMORT
- Manufacturer: MEY
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top eye,
Bottom eye - Weight [kg]: 1.8
- Bore Ø [mm]: 25
- Length 1 [mm]: 314
- Length 2 [mm]: 452
- Piston Rod Diameter [mm]: 12.4
- Article number of recommended accessories: PK448
- Packaging length [cm]: 60
- Packaging width [cm]: 7.2
- Packaging height [cm]: 7.2
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Weight [kg]: 4
- Bore Ø [mm]: 32
- Observe technical data:
- Length 1 [mm]: 391
- Length 2 [mm]: 553
- Piston Rod Diameter [mm]: 22
-
Article number of recommended accessories: MK194,
PK163 - Packaging length [cm]: 51.5
- Packaging width [cm]: 16.2
- Packaging height [cm]: 16.2
- Housing Diameter in Clamping Area [mm]: 55
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
- Axle: Reinforced wheel suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 55
- Piston Rod Diameter [mm]: 25
- Name: AMORT
- Manufacturer: KYB
- Additional information: KYB335808
- Lisainfo: KYB335808
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension Technical Information: Please refer to the technical drawing in "Documents"
- Vehicle type: G02
-
for PR number: G07,
G08 - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Top eye,
Bottom eye -
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: BIL
- Quality class: Q
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
Lisainfo: "Tootja: BILSTEIN
VW CADDY III 04-
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Suspension: for vehicles with lowered suspension
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SE30/
12X158A -
Shock Absorber Mounting Type: Top eye,
Bottom eye - Name: AMORT
- Manufacturer: SAA
- Lisainfo: 313 320
- Additional information: 313 320
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SFE36/
25X164A - Housing Diameter [mm]: 55
- Shock Absorber Mounting Type: Top pin
- Name: Amort
- Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Suspension: for vehicles with lowered suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SFE36/
25X157A - Housing Diameter [mm]: 55
- Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin -
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: BIL
Suspension: for vehicles with lowered suspension, for vehicles with heavy duty suspension
Additional information: "Tootja: BILSTEIN
VW TIGUAN 07-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
VW TIGUAN 07-
(kvaliteediklass: Q)"